A conductor is placed in a steady external electric field. Which of the following is FALSE?
a) All excess charge is distributed on the surface of the conductor
b) The electric field inside the conductor is the same as the external electric field
c) The electric field is zero inside the conductor
d) the electric field just outside the surface of the conductor is perpendicular to the surface

Answer:

Particle travels 4 * amplitude in one period = .68 mm

Answer:

Explanation:

Answer:

Explanation:

momentum is conserved. Initial momentum was zero, so final total momentum must also be zero

0.042(650) + 70v = 0

v = -0.39 m/s

|v| = 0.39 m/s

Answer:

7.5m/s

Explanation:

Force= mass × velocity

Energy is conserved, the car and van should have the same overall force.

1500kg × 30m/s= 6000kg × final velocity

Final velocity = 7.5m/s

Hi there!

Converting from angular velocity to tangential velocity can be done by:

v = ωr

v = tangential velocity (m/s)

ω = angular velocity (rad/sec)

r = radius (m)

Convert 12 cm to meters:

100 cm = 1 m

12 cm = 0.12 m

Now, convert rev/min to rad/sec:

[tex]{\frac{200rev}{min}} * \frac{1min}{60s} * \frac{2\pi rad}{1 rev} = 20.94 rad/sec[/tex]

v = 20.94 · 0.12 = 2.51 m/s

Answer:

I think that those are all true but I'm not completely sure.

Answer: It should be the 3rd option down!

Explanation:

Answer: C

Explanation:

Explanation:

a) Here is the free-body diagram. Note that I included the components of the weight mg (shown in dotted arrows) for use in the other parts of the problem.

b) The component of the weight parallel to the plane (shown in the diagram as a dotted arrow along the x-axis) is [tex]mg\sin15[/tex] and it is equal to

[tex]mg\sin15 = (25\:\text{kg})(9.8\:\text{m/s}^2)\sin15 = 63.4\:\text{N}[/tex]

c) Applying Newton's 2nd law to the y-axis, we can write

[tex]y:\;\;\;N - mg\cos15 = 0 \Rightarrow N = mg\cos15[/tex]

[tex]N = (25\:\text{kg})(9.8\:\text{m/s}^2)\cos15 = 236.7\:\text{N}[/tex]

d) The component of the weight mg into the plane is the same as the normal force, hence it's also 236.7 N.

e) To solve for the coefficient of friction, we apply Newton's 2nd law to the x-axis:

[tex]x:\;\;\;mg\sin15 - F_f = 0[/tex]

[tex]\Rightarrow F_f = mg\sin15\;\;(2)[/tex]

where [tex]F_f[/tex] is the frictional force defined as [tex]F_f = \mu N[/tex] so we can use Eqn(1) on Eqn (2) to write

[tex]\mu (mg\cos15) = mg\sin15[/tex]

Solving for [tex]\mu,[/tex] we get

[tex]\mu = \dfrac{\sin15}{\cos15} = \tan15 = 0.27[/tex]

(a) The period of the sound wave is 0.005 s.

(b) The wavelength of the wave when the speed of the wave is 1480 m/s is 6.73 m.

(c) The wavelength of the sound wave as it travels through air is 1.55 m.

The given parameters;

The period of the sound wave is calculated as follows;

[tex]T = \frac{1}{f} \\\\T = \frac{1}{220} \\\\T = 0.005 \ s[/tex]

The wavelength of the wave when the speed of the wave is 1480 m/s is calculated as follows;

[tex]v = f\lambda \\\\\lambda = \frac{v}{f} \\\\\lambda = \frac{1480}{220} \\\\\lambda = 6.73 \ m[/tex]

The wavelength of the sound wave as it travels through air with a speed of about 341 m/s;

[tex]\lambda = \frac{v}{f} \\\\\lambda = \frac{341}{220} \\\\\lambda = 1.55 \ m[/tex]

Learn more about wave equation here: https://brainly.com/question/4692600

Answer:

Explanation:

A)

v² = u² + 2as

a = (v² - u²) / 2s

a = (0² - 370²) / (2(0.130))

a = -526,538 m/s²

B)

t = v/a

t = 370 / 526538

t = 0.0007027... s or 0.7 ms

C)

F = ma

F = 0.00175(526,538) = 921.442307... = 921 N

Answer:a)   λ = 4.862 10⁻⁷ m,  b)  λ = 4.341 10⁻⁷ m

Explanation:

The spectrum of hydrogen can be described by the expression

in the case of the initial state n = 2 this series is the Balmer series

a) Find the wavelength for n = 4

let's calculate

          = 1,097 10⁷ ()

         \frac{1}{ \lambda} = 1.097 10⁷ 0.1875 = 0.2056 10⁷

          λ = 4.862 10⁻⁷ m

b) n = 5

    \frac{1}{ \lambda} = 1,097 10⁷ ()

    \frac{1}{ \lambda} = 1.097 10⁷ 0.21 = 0.23037 10⁷

     λ = 4.341 10⁻⁷ m

Answer:

geothermal energy

Explanation:

the energy is obtained from the heat within the surface of earth

Answer:

heat energy

Explanation:

Answer:

ıf u find the answer can u comment me to notification thank u

Explanation:

Answer:

6621.75J

Explanation:

In this case, the bell is not in motion. So we are going to calculate its potential energy rather than its kinetic energy since kinetic energy is the energy a body possesses in motion.

The formula for the potential energy is m*g*h, meaning the mass * acceleration due to gravity * height. Here the mass, m = 15kg, the acceleration due to gravity = 9.81m/s^2, and the height, h = 45m

Substituting our values, the answer becomes 15 * 9.81 * 45 = 6621.75J. Hope you understood my explanation?

Answer:

-9.0 × 10-6 m3 kg

Explanation:

I'm not sure if that's what you're looking for nor do I know how to explain it.

All metals are solid at (our) living temperatures except for mercury which is a liquid. Metals are shiny for a while at least when properly finished. Metals are good conductors of both heat and electricity. This is due to the excess electrons in their valence clouds that facilitate energy transfer.What are 5 characteristics of metal?

Metals are lustrous, malleable, ductile, good conductors of heat and electricity

Silver conducts electricity better than any other metal.

Brass is an alloy made from zinc and copper.

Pure gold is too soft for many things so most gold is combined with other metals to make it stronger. ...

World time periods are often listed by the metal used.

Answer:

The temperature is constant at 'X'. No increase or decrease. Would be same answer if there were a 'X' at temperature 'D'.

Slope of graph is zero so no change in the temperature.

Temperature is a physical quantity that expresses quantitatively the perceptions of hotness and coldness. Temperature is measured with a thermometer.

Given graph of temperature and time, at position x there in no change in temperature with time so temperature is not changing.

Slope of graph is zero so no change in the temperature.

To learn more about temperature refer to the link:

brainly.com/question/11464844

#SPJ2

Hi there!

The period is given by:

[tex]T = \frac{2\pi}{w}[/tex]

T = Period (sec)

w = angular frequency (rad/sec)

According to the equation for SHM in terms of position:

y(t) = Asin(ωt + φ)

A = Amplitude (m)

ω = angular frequency (rad/sec)

t = time (sec)

φ = phase angle

In this instance, the angular frequency is given as 18π.

Plug this value into the equation for T:

[tex]T= \frac{2\pi}{18\pi} = \frac{1}{9} = \boxed{0.111 s}[/tex]

Answer:

The rock with more mass will also have more force pulling it down, so the accelerations can be the same.

Explanation:

The planar simple harmonic wave travels in the positive direction of x axis with wave velocity u=2m/s, and the vibration curve of the particle at the origin in cosinusoidal form is shown in the figure.

Try to find (1) the vibration function of the particle at the origin, (2) the wave function of the planar simple harmonic wave according to the origin.

Answer:

Figure 16.8 The pulse at time

t

=

0

is centered on

x

=

0

with amplitude A. The pulse moves as a pattern with a constant shape, with a constant maximum value A. The velocity is constant and the pulse moves a distance

Δ

x

=

v

Δ

t

in a time

Δ

t

.

The distance traveled is measured with any convenient point on the pulse. In this figure, the crest is used.

Answer:

Give me what kind of example you need please so I can help you. Put it in the comments.

Explanation:

Answer:

Looks good to me

Explanation:

#2 should probably be turning potential energy to kinetic.

Answer:

18.36 m/s

Explanation:

We can solve this using conservation of energy. The energy in the system will be conserved since there are no outside forces acting upon it so the potential energy and kinetic energy will be equal. Giving us this formula to start:

1/2mv^2=mgh

m=mass

g=gravity

h=height

v=velocity

We can start by figuring out the total height the rock travels which we can do by subtracting the height of the frisbee by the height the rock started at.

19m-1.8m=17.2m

Now we can plug in our variables to solve for velocity.

First we negate mass since its on both sides and cancels out leaving us with.

1/2v^2=gh

Plug in.

1/2v^2=(9.8)(17.2)

1/2v^2=168.56

v^2=337.12

v=18.36m/s

[tex]\text{Given that,}\\\\\text{Initial velocity,} ~v_0 = 0~ \text{m~s}^{-1}\\\\\text{Time, t = 1.3~sec}\\\\\text{Acceleration, a = 9.1 m s}^{-2}\\\\\\\\\text{Velocity,}\\\\v = v_0 +at\\\\\implies v = 0 + 9.1 \times 1.3 = 11.83~~ \text{m~s}^{-1}[/tex]

Answer:

The nervous system handles the stress response, which, if overworked, can eventually lead to diseases ranging from high blood pressure to diabetes.

Explanation:

hope I helped

Answer:

Explanation:

 Gamma can occur at any step in the decay as the remaining protons and neutrons rearrange themselves into their new identity.

Answer:

Explanation:

Edit to add part a

a)  Heating a gas causes the atoms to increase their kinetic energy. With only atmospheric pressure to contain it, the gas will decrease in density by pushing colder gas out of the way. The lid is then sealed to the jar and allowed to cool. The cooling gas, now constrained by the volume of the jar will be forced to lower its pressure to maintain equilibrium. The lower pressure inside the jar will allow the atmospheric pressure outside the jar to "click" the lid indicating a proper seal.

b Before opening there is a much lower pressure inside the jar than outside. The outside pressure keeps the lid constantly in the "clicked" position.

c After the jar is opened, the pressure on either side of the lid is equal and an unbalanced force applied to one side of the lid or the other can cause the lid to "click" or "unclick" depending on the initial position.