Answer:
See explanation
Explanation:
The average speed of the molecules of a gas depends on the temperature of the gas and its molar mass and not on the volume of the gas.
The average velocity of a gas is given by; vrms=√3RTM
R= gas constant
T= Absolute temperature
M= molar mass of the gas
Where the temperature of the gas is held constant, the average velocity of gas molecules depends on the molar mass of the gas. Hence, if a sample of gas is slowly compressed to one-half of its original volume with no change in temperature, the average speed of the molecules in the sample of gas remains the same.
Balance the redox reaction Al(s) + MnO4^- (aq) --> MnO2 (s) + Al(OH)4^- (aq) in aqueous basic solution
Answer:
Al + MnO4- + 2H2O → Al(OH)4- + MnO2
Explanation:
First of all, we out down the skeleton equation;
Al + MnO4- → MnO2 + Al(OH)4-
Secondly, we write the oxidation and reduction equation in basic medium;
Oxidation half equation:Al + 4H2O + 4OH- → Al(OH)4- + 4H2O + 3e-
Reduction half equation:MnO4- + 4H2O + 3e- → MnO2 + 2H2O + 4OH-
Thirdly, we add the two half reactions together to obtain:
Al + MnO4- + 8H2O + 4OH- + 3e- → Al(OH)4- + MnO2 + 6H2O + 3e- + 4OH-
Lastly, cancel out species that occur on both sides of the reaction equation;
Al + MnO4- + 8H2O→ Al(OH)4- + MnO2 + 6H2O
The simplified equation now becomes;
Al + MnO4- + 2H2O → Al(OH)4- + MnO2
When should a line graph be used
Answer:
Line graphs are used to track changes over short and long periods of time. When smaller changes exist, line graphs are better to use than bar graphs. Line graphs can also be used to compare changes over the same period of time for more than one group.
A laboratory utilizes a mixture of 10% dimethyl sulfoxide (DMSO) in the freezing and long-term storage of embryonic stem cells. If DMSO has a specific gravity of 1.1004, calculate the specific gravity, to four decimal places, of the mixture (assume water to be the 90% portion).
Answer:
The correct answer is "1.0100".
Explanation:
Let the volume of mixture be 100 ml.
then,
The volume of DMSO will be 10 mL as well as that of water will be 90 mL.
DMSO will be:
= [tex]10\times 1.1004[/tex]
= [tex]11.004 \ g[/tex]
The total mass of mixture will be:
= [tex]90+11.004[/tex]
= [tex]101.004 \ g[/tex]
Density of mixture will be:
= [tex]\frac{Mass}{Volume}[/tex]
= [tex]\frac{101.004}{100}[/tex]
= [tex]1.01004 \ g/mL[/tex]
hence,
Specific gravity of mixture will be:
= [tex]\frac{Density \ of \ mixture}{Density \ of \ water}[/tex]
= [tex]\frac{1.01004}{1}[/tex]
= [tex]1.0100[/tex]
what is food nutrients
Answer:
Nutrients arw compounds in foods essential to life and heath
Answer: In simple terms nutrients are the energy that you get from food certain foods give more nutrients and others give close to none. That is what nutrients in your food is
Explanation:
Two chemicals A and B are combined to form a chemical C. The rate, or velocity, of the reaction is proportional to the product of the instantaneous amounts of A and B not converted to chemical C. Initially, there are 100 grams of A and 50 grams of B, and for each gram of B, 2 grams of A is used. It is observed that 25 grams of C is formed in 9 minutes. How much is formed in 36 minutes
Answer:
In 36 minutes, 100 grams of Chemical C is formed.
Explanation:
Combination of chemicals A and B = chemical C
Chemical A available = 100 grams
Chemical B available = 50 grams
Proportion of A mixed with C = A2
Proportion of B mixed with C = B1
Therefore, Chemical C = A2 + B1
If 25 grams of C is formed in 9 minutes
In one minute 25/9 grams of C will be formed
Therefore, in 36 minutes, 25/9 * 36 = 100 grams
2FePO4+3 Na2so4--->Fe2(so4) + 2 Na3Po4 if i ise 25grams of iron iii phosphate 18.5 g iton what is my percent yeild?
Answer:
56%
Explanation:
If I use 25 grams of iron (III) phosphate and obtain 18.5 g of iron (III) sulfate, what is my percent yield?
Step 1: Write the balanced equation
2 FePO₄ + 3 Na₂SO₄ ⇒ Fe₂(SO₄)₃ + 2 Na₃PO₄
Step 2: Calculate the theoretical yield of Fe₂(SO₄)₃
The mass ratio of FePO₄ to Fe₂(SO₄)₃ is 301.64:399.88.
25 g FePO₄ × 399.88 g Fe₂(SO₄)₃/301.64 g FePO₄ = 33 g Fe₂(SO₄)₃
Step 3: Calculate the percent yield of Fe₂(SO₄)₃
We will use the following expression.
%yield = (experimental yield/theoretical yield) × 100%
%yield = (18.5 g/33 g) × 100% = 56%
Aqueous hydrobromic acid HBr will react with solid sodium hydroxide NaOH to produce aqueous sodium bromide NaBr and liquid water H2O . Suppose 4.9 g of hydrobromic acid is mixed with 3.86 g of sodium hydroxide. Calculate the maximum mass of sodium bromide that could be produced by the chemical reaction. Round your answer to 2 significant digits.
Answer:
6.2g of NaBr are produced
Explanation:
The reaction of HBr with NaOH occurs as follows:
HBr + NaOH → NaBr + H2O
Where 1 mole of each reactant produce 1 mole of NaBr
To solve this question we need to find the moles of each reactant using their molar mass. With moles we can find limiting reactant and the moles (And mass) of NaBr produced, as follows:
Moles HBr -Molar mass: 80.9119g/mol)-
4.9g * (1mol/80.9119g) = 0.0606 moles HBr
Moles NaOH -Molar mass: 40g/mol-
3.86g * (1mol/40g) = 0.0965 moles NaOH
As the reaction is 1:1 and the moles of HBr < Moles NaOH, the limiting reactant is HBr and moles of NaBr produced are 0.0606 moles.
The mass of NaBr (Molar mass: 102.894g/mol) is:
0.0606 moles * (102.894g/mol) =
6.2g of NaBr are produced385 x 42.13 x 0.079 is (consider significant figures):
385 x 42.13 x 0.079 = 1281.38395
Determine the value of the equilibrium constant for the following reaction, where the following amounts of each species are present at equilibrium in a 5.00 L container: 1.34 mol HCl, 4.30 mol O2, 30 g H2O, and 2.42 mol Cl2.
4 HCl(g) O2(g) ----> 2 H2O(l) 2 Cl2(g)
Explanation:
here's the answer to your question about
A chemist determines by measurements that moles of bromine liquid participate in a chemical reaction. Calculate the mass of bromine liquid that participates. Round your answer to significant digits.
Answer:
5.20 grams of Br₂
Explanation:
From our previous knowledge;
We understand that:
The number of moles of a given element = mass of the element divided by its molar mass.
Mathematically:
[tex]\mathbf{no \ of \ moles =\dfrac{ mass}{ molar \ mass}}[/tex]
From the given information, let's assume that the 0.065 moles of liquid -bromine partake in the reaction.
From the periodic table, the molar mass of Bromine is = 79.9 g/mol
As such, the mass of liquid that partakes is calculated as:
0.065 mol = mass/ 79.9 g/mol
mass = 0.065 mol × 79.9 g/mol
mass of liquid that partakes in the reaction = 5.20 grams of Br₂
Select the structure of a compound C6H14 with a base peak at m/z 43.
A) CH3CH2CH2CH2CH2CH3
B) (CH3CH2)2CHCH3
C) (CH3)3CCH2CH3
D) (CH3)2CHCH(CH3)2
E) None of these choices.
The structure of a compound C₆H₁₄ with a base peak at m/z 43 is none of these .
What is a compound?Compound is defined as a chemical substance made up of identical molecules containing atoms from more than one type of chemical element.
Molecule consisting atoms of only one element is not called compound.It is transformed into new substances during chemical reactions. There are four major types of compounds depending on chemical bonding present in them.They are:
1)Molecular compounds where in atoms are joined by covalent bonds.
2) ionic compounds where atoms are joined by ionic bond.
3)Inter-metallic compounds where atoms are held by metallic bonds
4) co-ordination complexes where atoms are held by co-ordinate bonds.
They have a unique chemical structure held together by chemical bonds Compounds have different properties as those of elements because when a compound is formed the properties of the substance are totally altered.
Learn more about compounds,here:
https://brainly.com/question/13516179
#SPJ6
Predict the reactants of this chemical reaction. That is, fill in the left side of the chemical equation. Be sure the equation you submit is balanced. (You can edit both sides of the equation to balance it, if you need to.)
Note: you are writing the molecular, and not the net ionic equation.
NaClO3(aq) + H2O(l)
Answer:
HClO₃(aq) + NaOH(aq) ⇒ NaClO₃(aq) + H₂O(l)
Explanation:
We have the products of a reaction and we have to predict the reactants. Since the products are salt and water, this must be a neutralization reaction. In a neutralization reaction, an acid reacts with a base. To form NaClO₃, the acid must be HClO₃(aq) and the base NaOH(aq). The balanced chemical equation is:
HClO₃(aq) + NaOH(aq) ⇒ NaClO₃(aq) + H₂O(l)
CH3CH2OH
______ions
in an aqueous solution.
А
forms
B
does not form
Answer:
When ionic compounds dissolve, they break apart into ions which are then able to conduct a current ( conductivity ). ... Many molecular compounds, such as sugar or ethanol, are nonelectrolytes. When these compounds dissolve in water, they do not produce ions.
Explanation:
Ethanol is an organic compound with an alcoholic functional group and is nonelectrolytes. Ethanol (CH₃CH₂OH) does not form ions in an aqueous solution. Thus, option B is correct.
What are nonelectrolytes?Nonelectrolytes are substances that do not dissociate readily to yield ions and also are poor conductors of electricity and heat due to a lack of charged ions.
Ethanol is a nonelectrolyte that does not show conductivity and can be dissolved in water without producing ions. They cannot forms ions upon dissociation as covalent bonds are present.
Instead of ions that have covalent compounds that lack the ability to transfer the electron to conduct the electrical charge. Glucose, ethanol, etc. are some examples of a nonelectrolyte.
Therefore, option B. ethanol does not form ions is the correct blank.
Learn more about nonelectrolytes here:
https://brainly.com/question/14633704
#SPJ2
(d) 40g of sulphur
Calculate the number of moles of 40g of sulphur
Answer:
It is 1.25 moles
Explanation:
Molar mass of sulphur = 32 g
[tex]{ \bf{moles = \frac{given \: mass}{molar \: mass} }} [/tex]
Substitute:
[tex]{ \sf{moles = \frac{40}{32} }} \\ { \sf{ = 1.25 \: moles}}[/tex]
A chunk of a metal alloy displaces 0.58 L of water and has a mass of 2.9 kg. What is the density of the alloy in g/cm3?
Answer:
5g/cm3
Explanation:
firstly convert the litres and kilograms to grams and centimeters.
1l is equivalent to 1000cm3
0.58×1000
580cm3
and 1kg is equivalent to 1000g
2.9×1000
2900
then find the density by using the formula
density=mass/volume
=2900g/580cm3
=5g/cm3
I hope this helps
Which of the following compounds would you expect to be an electrolyte?
N2
CH4
H2O
O2
КСІ
Answer:
N2 but i really didn't know
The compound that would be expected to be an electrolyte is : ( A ) N₂
What is an electrolyte
An electrolyte is any subsatnce which conducts electircity when dissolved in a solvent such as water. From the question the compound that can conduct electricty when dissolved in water is N₂
Hence we can conclude that The compound that would be expected to be an electrolyte is : ( A ) N₂
Learn more about electrolyte : https://brainly.com/question/14308411
#SPJ2
The reaction responsible for producing the heat that maintains the temperature of your body is
Answers
A.
metabolism.
B.
catabolism.
C.
anabolism.
D.
photosynthesis.
Question
Answer:
A
Explanation:
it increase the rate of reaction when necessary
The chemical change that is responsible for producing the heat that maintains the temperature of your body is metabolism.
What is chemical change?
Chemical changes are defined as changes which occur when a substance combines with another substance to form a new substance.Alternatively, when a substance breaks down or decomposes to give new substances it is also considered to be a chemical change.
There are several characteristics of chemical changes like change in color, change in state , change in odor and change in composition . During chemical change there is also formation of precipitate an insoluble mass of substance or even evolution of gases.
There are three types of chemical changes:
1) inorganic changes
2)organic changes
3) biochemical changes
During chemical changes atoms are rearranged and changes are accompanied by an energy change as new substances are formed.
Learn more about chemical changes,here:
https://brainly.com/question/23693316
#SPJ7
what vent system nitrogen vessel used to?
it's helpful
you can try this answer
Given the following formula for calculating the ionization energy of one-electron species such as Li2+, He+, and H, calculate the ionization energy (in J/mol) for B4+. Use scientific notation in answers (ex: 1E10, 3.20E-6)
Answer:
The answer is "[tex]32819.9 \ \frac{J}{mol}\\\\[/tex]"
Explanation:
[tex]Boron: 5^{B}\to 1s^2 2s^2 2p^1[/tex]
[tex]\Delta E=-2.18\times 10^{-18}\ \frac{J}{atom}\ (\frac{1}{\infity^2}-\frac{1}{n^2_{initial}})(z^2) (6.022\times 10^{23}\ \frac{atom}{mol})\\\\[/tex]
[tex]=-2.18\times 10^{-18}\ \frac{J}{atom}\ (0-\frac{1}{1})(5^2) (6.022\times 10^{23}\ \frac{atom}{mol})\\\\ =2.18\times 10^{-18}\times 25 \times 6.022\times 10^{23}\ (\frac{J}{mol})\\\\ =328.199 \times 10^{5}\ (\frac{J}{mol})\\\\ =32819 \times 10^{3}\ (\frac{J}{mol})\\\\ =32819.9 \ (\frac{J}{mol})\\\\[/tex]
Select all of the statements that are true about a buffer solution. A buffer solution always changes color when the pH changes. A buffer solution reacts with basic solutions. A buffer solution has a pH of 7. A buffer solution resists small changes in pH. A buffer solution reacts with acidic solutions. At what point on the titration curve for a weak acid is the solution a buffer
Answer: A buffer solution reacts with basic solutions.
A buffer solution resists small changes in pH.
A buffer solution reacts with acidic solutions.
Explanation:
A buffer solution simply refers to an aqueous solution that consist of a mixture of a weak acid and the conjugate. From the options given, the ones application to a buffer solution include:
• A buffer solution reacts with basic solutions.
• A buffer solution resists small changes in pH.
• A buffer solution reacts with acidic solutions.
Consider an equilibrium (K1) that is established after 10 mL of compound A and 10 mL of compound B are mixed. Now, imagine the equilibrium (K2) where 1 mL of compound A is added to 100 mL of compound B. How are K1 and K2 related algebraically (read this question VERY carefully, at least one more time)
The equilibrium constant K₁ = Equilbrium constant K₂.
The equilibrium constant, K, of a reaction, is defined as:
"The ratio between concentration of products powered to their reaction quotient and concentration of reactants powered to thier reaction quotient".
For the reaction:
aA + bB ⇄ cC + dD
The equilibrium constant, K, is:
[tex]K = \frac{[C]^c[D]^d}{[A]^a[B]^b}[/tex]
Now, assuming the reaction of the problem is 1:1:
A + B ⇄ C + D
[tex]K = \frac{[C][D]}{[A][B]}[/tex]
The concentrations of the reactants are directly proportional to the volume added. Thus, we can assume that concentration = Volume. Replacing for K₁ and K₂:
[tex]K_1 = \frac{[C][D]}{[10mL][10mL]} = K_1 = \frac{[C][D]}{100mL^2}[/tex]
In the same way:
[tex]K_2 = \frac{[C][D]}{[1mL][100mL]} = K_2 = \frac{[C][D]}{100mL^2}[/tex]
Thus, we can say:
K₁ = K₂Learn more about chemical equilibrium in:
https://brainly.com/question/4289021?referrer=searchResults
Select all that are True.
a. For an isoelectronic series, the species with the most negative charge has the smallest first ionization energy.
b. The removal of an electron from a neutral atom results in a release of energy in the form of heat.
c. For an isoelectronic series, the species with the most positive charge has the smallest first ionization energy.
1. Metallic strontium crystallizes in a face-centered cubic lattice, with one Sr atom per lattice point. If the edge length of the unit cell is found to be 608 pm, what is the metallic radius of Sr in pm?
2. The substance beta manganese is found to crystallize in a cubic lattice, with an edge length of 630.0 pm. If the density of solid beta manganese is 7.297 g/cm3, how many Mn atoms are there per unit cell?
Answer:
[tex]r=215pm[/tex]
[tex]N_{Mn}=20[/tex]
Explanation:
From the question we are told that:
Edge length of the unit cell [tex]l=608pm[/tex]
a)
Generally the equation for The relationship between edge length and radius is mathematically given by
[tex]4r=\sqrt{2a}[/tex]
Therefore
[tex]4r=\sqrt{2*608}[/tex]
[tex]r=\frac{\sqrt{2*608}}{4}[/tex]
[tex]r=215pm[/tex]
b)
From the question we are told that:
Density [tex]\rho=7.297[/tex]
Edge length of [tex]l=630.0 pm=>630*10^-{10}[/tex]
Therefore Volume is given as
[tex]V=l^3[/tex]
[tex]V=630*10^-{10}^3[/tex]
[tex]V=2.50047*10^{−22}[/tex]
Generally the equation for Mass is mathematically given by
[tex]m=Volume*density[/tex]
[tex]m=V*\rho[/tex]
[tex]m=2.50047*10^{−22}*7.297[/tex]
[tex]m=1.83*10^{-21}g[/tex]
Therefore Molarity is given as
[tex]n=\frac{M}{Molar M}[/tex]
[tex]n=\frac{1.83*10^{-21}g}{55}[/tex]
[tex]n=3.32*10^{-23}[/tex]
Finally The atoms in a unit cell is
[tex]N_{Mn}=Moles*Avogadro\ constant[/tex]
[tex]N_{Mn}=3.32*10^{-23}*6.023*10^{23}[/tex]
[tex]N_{Mn}=20[/tex]
Considering a fish breeder decided to breed small fishes which needs a pH between 6,0 to 7,0 to stay alive. He needs to adjust the water's pH that is 5,0 to a value of 6.5, having available only calcium carbonate. The mass in mg added to 5L of water is about:
A)2,5
B)5,5
C)6,5
D)7,5
E)9,5
What is the molarity of a solution that contains 17g of NH₃ in 0.50L of solution?
Please explain as well!
Explanation:
Because molarity is mol/L, we'll have to convert 17g to mol.
After obtaining the mol, we'll divide that by the volume to obtain Molarity.
[tex]\\ \sf\longmapsto NH_3[/tex]
[tex]\\ \sf\longmapsto 14u+3(1u)[/tex]
[tex]\\ \sf\longmapsto 14u+3u[/tex]
[tex]\\ \sf\longmapsto 17u[/tex]
[tex]\\ \sf\longmapsto 17g/mol[/tex]
Moles of Ammonia:-
[tex]\boxed{\sf No\:of\:moles =\dfrac{Given\:mass}{Molar\:mass}}[/tex]
[tex]\\ \sf\longmapsto No\:of\:moles=\dfrac{17}{17}[/tex]
[tex]\\ \sf\longmapsto No\;of\:moles=1mol[/tex]
Volume of solution=0.50LWe know
[tex]\boxed{\sf Molarity=\dfrac{Moles\:of\:solute}{Volume\:of\: Solution\:in\:L}}[/tex]
[tex]\\ \sf\longmapsto Molarity=\dfrac{1}{0.50}[/tex]
[tex]\\ \sf\longmapsto Molarity=2M[/tex]
8) Determine whether mixing each pair of the following results in a buffera. 100.0 mL of 0.10 M NH3 with 100.0 mL of 0.15 MNH4Cl b. 50.0 mL of 0.10 M HCL with 35.0 mL of 0.150 M NaOHc. 50.0 mL of 0.15 M HF with 20.0 mL of 0.15 M NaOHd. 175.0 mL of 0.10 M NH3 with 150.0 mL of 0.12 M NaOH
Answer:
a. 100.0 mL of 0.10 M NH₃ with 100.0 mL of 0.15 M NH₄Cl.
c. 50.0 mL of 0.15 M HF with 20.0 mL of 0.15 M NaOH.
Explanation:
A buffer system is formed in 1 of 2 ways:
A weak acid and its conjugate base.A weak base and its conjugate acid.Determine whether mixing each pair of the following results in a buffer.
a. 100.0 mL of 0.10 M NH₃ with 100.0 mL of 0.15 M NH₄Cl.
YES. NH₃ is a weak base and NH₄⁺ (from NH₄Cl ) is its conjugate base.
b. 50.0 mL of 0.10 M HCl with 35.0 mL of 0.150 M NaOH.
NO. HCl is a strong acid and NaOH is a strong base.
c. 50.0 mL of 0.15 M HF with 20.0 mL of 0.15 M NaOH.
YES. HF is a weak acid and it reacts with NaOH to form NaF, which contains F⁻ (its conjugate base).
d. 175.0 mL of 0.10 M NH₃ with 150.0 mL of 0.12 M NaOH.
NO. Both are bases.
A mixture of methane and carbon dioxide gases contains methane at a partial pressure of 431 mm Hg and carbon dioxide at a
partial pressure of 504 mm Hg. What is the mole fraction of each gas in the mixture?
XCHA
Xc02
Answer:
XCH₄ = 0.461
XCO₂ = 0.539
Explanation:
Step 1: Given data
Partial pressure of methane (pCH₄): 431 mmHgPartial pressure of carbon dioxide (pCO₂): 504 mmHgStep 2: Calculate the total pressure in the container
We will sum both partial pressures.
P = pCH₄ + pCO₂
P = 431 mmHg + 504 mmHg = 935 mmHg
Step 3: Calculate the mole fraction of each gas
We will use the following expression.
Xi = pi / P
XCH₄ = pCH₄/P = 431 mmHg/935 mmHg = 0.461
XCO₂ = pCO₂/P = 504 mmHg/935 mmHg = 0.539
Give me an atom with the following characteristics:
Lanthanide series
Boron
Chalogen
Alkaline Earth metal
Explanation:
Lanthanide series= E4
Boron=Si
Chalogen=O
Alkaline Earth metal =M9
What functional group is found in an alcohol?
A. Ester
B. Amino
C. Carbonyl
D. Hydroxyl
Answer:
an alcohol is a Hydroxyl group due to the OH~ that is associated with it's molecules
The functional group found in an alcohol is Hydroxyl . Therefore, the correct option is option D.
What is functional group?A functional group in organic chemistry is a substituent and moiety inside a molecule that triggers the molecule's distinctive chemical processes. No matter how the rest of a molecule is made up, the very same functional group would experience the same or a similar set of chemical events.
This permits the design of synthetic chemistry as well as the methodical forecasting of chemical reactions as well as the behaviour of chemical molecules. Other functional groups close by can affect a functional group's reactivity. Retrosynthetic analysis can be used to design organic synthesis by using functional group interconversion. The functional group found in an alcohol is Hydroxyl .
Therefore, the correct option is option D.
To know more about functional group, here:
https://brainly.com/question/29263610
#SPJ7
The chemical formula for strontium sulfide is SrS . A chemist measured the amount of strontium sulfide produced during an experiment. She finds that 199.g of strontium sulfide is produced. Calculate the number of moles of strontium sulfide produced. Be sure your answer has the correct number of significant digits.
Answer:
The number of moles of strontium sulfide produced is:
= 1.663.
Explanation:
Chemical formula for strontium sulfide = SrS
Production of strontium sulfide = 199g
1 mole = 1 moles Strontium Sulfide, which is equal to 119.685 grams
The number of moles of strontium sulfide produced = 1.663 (199/119.685)
The number of moles of strontium sulfide produced is the dividend of the amount of strontium sulfide produced during the experiment divided by the mass of 1 mole.
