According to the unbalanced equation above if 8.542 moles of oxygen gas reacts with an excess amount of hydrogen gas, how many grams of water is produced

Answer:

1031.084g

Explanation:

n=m/M

m=n(M)

m = (3.4mol)(303.26g/mol)

1031.084g

Hope that helps

Answer:

1031.08

Explanation:

You start with 3.4 moles and you know that 6.022 x 10 ^ 23 = 1 mole( Avogadro's Number), so you just multiply those 2 numbers and the moles will cancel leaving you with grams of Lead Sulfate.

Answer:

I would say iconic bond

Explanation:

Answer:

1 2/15

Explanation:

2/3 + 7/15 = 17/15 =1 2/15

The new volume of the gas at 20 °C is 205 mL

From the question given above, the following data were obtained:

With the application of the combine gas equation, we can obtain the new volume of the gas as illustrated below:

[tex]\frac{P_1V_1}{T_1} = \frac{P_2V_2}{T_2} \\ \\ \frac{10 \times 250}{298} = \frac{12 \times V_2}{293} \\ \\ \frac{2500}{298} = \frac{12 \times V_2}{293} \\ \\ cross \: multiply \\ \\ 298 \times 12 \times V_2 = 2500 \times 293 \\ \\ divide \: both \: side \: by \: 298 \times 12 \\ \\ V_2 = \frac{2500 \times 293}{298 \times 12} \\ \\ V_2 = 205 \: mL \\ [/tex]

Therefore, the new volume of the gas is 205 mL

Learn more about gas laws: https://brainly.com/question/6844441

The new volume of the gas at the given pressure and temperature is 205 mL.

The given parameters:

The new volume of the gas is calculated by applying general gas equation as follows;

[tex]\frac{V_1 P_1}{T_1} = \frac{V_2P_2}{T_2} \\\\V_2 = \frac{V_1P_1 T_2}{T_1P_2} \\\\V_2 = \frac{(250\ mL) \times 10 \times 293}{298 \times 12} \\\\V_2 = 204.84 \ mL\\\\v_2 = 205 \ mL[/tex]

Thus, the new volume of the gas at the given pressure and temperature is 205 mL.

Learn more about general gas equation here:

Answer:

Answer:

2. d

3. i

4. e

5. j

6. g

7. a

8. f

9. b

Explanation:

do a few searches when you have time to deepen understanding!

Answer:

5 ms2

Explanation:

The acceleration of the ball is 5 ms2.

Acceleration is the rate at which an object's velocity with respect to time changes. It is a vector quantity to accelerate (in that they have magnitude and direction). The direction of the net force acting on an object determines the direction of its acceleration.

The acceleration of the car in its present direction of motion is referred to as a linear acceleration (or tangential acceleration in circular motions), and the passengers on board feel a force pressing them back into their seats as a result.

The acceleration that is used to change direction is referred to as radial acceleration (or centripetal acceleration in circular travels), and the reaction that the passengers feel is a centrifugal force.

Therefore, The acceleration of the ball is 5 ms2.

To learn more about acceleration, refer to the link:

https://brainly.com/question/12550364

#SPJ2

Answer:

Dilute the sample

Explanation:

The statement is not entirely accurate. The Bradford assay is commonly used to determine protein concentrations in a sample.

However, it is true that the Bradford assay is more accurate and reliable for measuring protein concentrations at low to moderate levels rather than at very high concentrations.

The Bradford assay is based on the binding of Coomassie Brilliant Blue dye to proteins. The dye undergoes a color change from brown to blue when bound to proteins, allowing for the measurement of protein concentrations. At low protein concentrations, the binding of the dye to proteins is well-calibrated and results in a linear relationship between protein concentration and color intensity, making it suitable for accurate quantification.

At high protein concentrations, the binding capacity of the dye may become saturated, leading to non-linear and less accurate measurements. The excess protein can also cause interference and affect color development. In such cases, dilution or alternative protein quantification methods may be more suitable, such as the BCA assay or the Lowry assay.

Therefore, while the Bradford assay can be used to measure protein concentrations across a range of concentrations, it is generally more reliable for low to moderate protein concentrations.

Learn more about proteins here:

https://brainly.com/question/30986280

#SPJ 6

Answer:

Explanation:

One day I was sitting on a leaf, in the early morning if a Tuesday, and I was just relaxing there. I then heard Bob( the water molecule next to me) say that he heard it was going to get pretty hot today. As the day went on I started to get pretty warm and I starting to evaporate and fly into the sky! It was really weird to see the world from up high. I stayed up there bouncing between clouds with Bob for a few hours, until the wind started to pick up and it got colder. I then started to shiver and began condensing with the other water molecules (and Bob). As it got colder we began to plummet to the earth really fast in the precipitate form of a water droplet. We hit the ground with a big ker-plop! I looked around me and we weren't the only ones. A bunch of other droplets had started to collect and form a puddle.

Hope this helps!

Answer:

Only chemical equation uses arrow instead of = sign

Answer:

Only chemical equation uses an arrow instead of a = sign.

A chemical equation depicts a chemical reaction by utilising chemical formulae and symbols to depict the reactants, products, and chemical changes that take place. In a chemical equation, the arrow indicates the direction of the reaction and is commonly depicted as a single arrow pointing from the reactants to the products. In contrast, the equals sign (=) is commonly used in mathematical equations to indicate that two expressions have the same value.

While numbers are used to indicate the relative proportions of reactants and products and minus signs are used to indicate reactants or products in the form of ions, the arrow is the most distinguishing feature that distinguishes chemical equations from mathematical equations.

Answer:

The bond between Phosphorus and Chlorine in PCl3 is covalent as chlorine needs one electron and phosphorus has metallic character and easily donate electron

Answer:

How Does a Solar Panel Generate Power? Solar panels use the photons produced by sunlight to generate direct current (DC) electricity. When the photons hit the panel they are absorbed by the panel's semiconducting silicon material.

Explanation:

Answer:

Solar panels produce electrical energy by absorbing the solar energy from the sun and converting it into electrical energy.

Explanation:

Answer:

Lithosphere

Explanation:

All three types of rock make up the Earth's lithosphere, the outermost layer. The lithosphere averages about 100 kilometers in thickness.

Answer:

Sodium is placed in group 1 of the periodic table of Alkali metals, and has a valence shell with one electron, making them very reactive. When placed in water, it disperses heat and begins to ignite and burn (due to its very reactive nature), resulting compound is hydrogen gas (H2), and a very strong base (Sodium Hydroxide, NaOH) used for cleaning appliances and for neutralizing agents.

Silver is placed on the transitional metal section of the periodic table, not quite reactive but is the most conductible element on the planet, is malleable and ductile. Due to it being costly and its rarity, it's not relied on for computer parts or wires. Silver doesn't actually directly react with water in its liquid state. It does produce hydrogen gas and Silver Oxide when reacting with water vapour.

In short, Sodium and water create new products, while Silver and water (only in water's gaseous form) form different products.

Answer:

sea urchins

Explanation:

Answer:

sea urchins

Explanation:

i took the test

Answer:

i think this would be an example of a physical change because here the substance is changing directly from a solid to a gas without passing through the liquid state which means that the composition of the substance has not changed and remains the same. This is also called sublimation.

Once I told a chemistry joke

I got no reaction.

What do you do with a sick chemistry teacher?

If you can't helium, and can't curium, you might as well barium.

I don't trust atoms,

I heard they make up everything

Hope I helped make ur day. :)

Answer:

    2H2    +   1 O2   ------>    2H2O

m = 12.7g                              m = ?

Get the number of moles for Hydrogen gas (H2) by dividing the mass by the molar mass (1.01g/mol as listed in the periodic table for its atomic mass)

12.7/1.01 = 12.57 mol of H2

Now use the mole to mole ratio of Hydrogen gas (H2) and water (H2O).

From the balanced equation, we can see that 2 mol of H2 gives us 2 mol of H2O. Since both of the ratios are equal (2:2), the moles we have for hydrogen gas is the same as the moles we get for water.

12.57 mol of H2O

Now that we have the amount of mol for H2O produced in this reaction, we can convert it to grams by multiplying the moles by the molar mass.

Molar mass of H2O = (1.01 x 2) + (16) = 18.02g/mol

12.57 x 18.02 = 226.5g (rounded)

Therefore 226.5g of water will be produced in this reaction

According to law of conservation of mass and stoichiometry, 114.3 g of water are produced if 12.7 grams of hydrogen reacted with an unknown amount of oxygen.

According to law of conservation of mass, it is evident that mass is neither created nor destroyed rather it is restored at the end of a chemical reaction .

Law of conservation of mass and energy are related as mass and energy are directly proportional which is indicated by the equation E=mc².Concept of conservation of mass is widely used in field of chemistry, fluid dynamics.

2 H₂ + O₂[tex]\rightarrow[/tex] 2 H₂O,according to this equation,4 g hydrogen reacts with 32 g oxygen to give 36 g water, thus 12.7 g of hydrogen will produce 12.7×36/4=114.3 g water and hence for this amount of water to be formed  12.7 g of hydrogen reacts with 101.6 g of oxygen which is obtained as 114.3-12.7=101.6 g

Thus, 114.3 g of water is produced.

Learn more about law of conservation of mass,here:

https://brainly.com/question/28711001

#SPJ2

Answer:

A. Producing certain synthetic materials could have a greater environmental impact than disposing of them.

Explanation

I just did this question and got it right.

The two ions present in the solution are:

1. Sodium ion, Na⁺

2. Hydroxide ion, OH¯

The correct answer to the question is the 3rd option. The sodium ion is positive, and the hydroxide ion is negative.

Ions are atoms or group of atoms which possess an electric charge.

Aqueous Sodium hydroxide, NaOH contains sodium ion and hydroxide ion.

The sodium ion is positive while the hydroxide ion is negative as illustrated below:

NaOH(aq) —> Na⁺(aq) + OH¯(aq)

From the illustration above, we can conclude that the correct answer to the question is the 3rd option. The sodium ion is positive, and the hydroxide ion is negative.

Please see attached photo for further details

Learn more: https://brainly.com/question/4414335

Answer:

1,4 mol

Explanation:

2 mol of Al reacts with 3 mol of FeO so for 2.1 mol of FeO you need 2 x 2.1 / 3 = 1.4mol

Answer:

2.409*10^24

Explanation:

If I am not mistaken you are supposed to do 4*6.022*10^23. This will allow for it to be converted.

I hope this helped

Answer:

100 Celsius mostly because water boils at sea level

Answer:

Even though the two substances possess many similarities, they have some unique properties. In turn, since they have the same properties, if they were the same substance, it would make matters worse, if the same chemical was in two different places, there would not be a difference between them since they are the same, just as it is with are two different chemicals would have differing properties since they are two properties would vary from one another since they are 2 totally different things!

Explanation:

There are 0.436 moles of nitrogen dioxide, NO2, present if the reaction conditions are 330 K, 2.46 atm, and 4.8 L.

The number of moles of nitrogen dioxide (NO2) in this question can be calculated by using the ideal gas law equation as follows:

PV = nRT

Where;

According to the reaction conditions given in this question;

2.46 × 4.8 = n × 0.0821 × 330

11.81 = 27.093n

n = 11.81 ÷ 27.093

n = 0.436mol

Therefore, there are 0.436 moles of nitrogen dioxide, NO2, present if the reaction conditions are 330 K, 2.46 atm, and 4.8 L.

Learn more about the ideal gas law at: https://brainly.com/question/4147359?referrer=searchResults