application of electroplating​

Answer; relative elements are most reactive elements and compounds may ignite spontaneously or explosively. They generally burn in water as well as the oxygen in the air

Explanation:

Answer:

Reactive elements are the  elements which are ready to gain electrons because they have  incompletely filled outermost shell.

Hope its helpful!

Please mark me as brainlist.

Answer:

chắc là câu B í

Explanation:

Answer:

convection is my correct answer

The number of significant figures will be four (4)

Answer:

is this true and false? then its true

Explanation:

Answer:

Fe(s) + H2SO4 (aq) ---> FeSO4 (s) + H2 (g)

Explanation:

Answer:

the product of q in the reaction below is Nacl

Answer:

okay so basically what you are being tested is if you know the difference between simple and fractional distillation and okay you can evaporate the mixture but you won't obtain water so you will use simple distillation to obtain both salt and water

Answer:

67.3g

Explanation:

%(w/w) = mass of solute/total mass of solution × 100

According to this question, an aqueous solution contains 32.7% KCl (w/w%). Firstly, we find the mass of the solute (KCl) as follows, if the mass of solution is 100g:

32.7 = mass of solute/100 × 100

mass of solute (KCl) = 32.7g

Mass of solution = mass of solvent (water) + mass of solute (KCl)

100g = x + 32.7g

x = 100 - 32.7

x = 67.3

Hence, the mass of water contained in the 100g solution is 67.3g.

Answer:

there are 4 possible isomers

Answer:

Soda all start with watered down corn syrup. To get the carbonation companies have different ways of doing this all of which are very different. The last step is to add artificial and natural flavors like lemon and lime, this is also the step in which sugar and preservatives are added.

Explanation:

I hope this answer your question, srry I couldn't go into detail.

Answer:

N=35%. so 35/100*7 =2.45%

H=5.0 so 5/100*1=0.05%

o=60% so 60/100*8=4.8%

Answer:

See explanation

Explanation:

Tyndall effect refers to the scattering of light in a solution. Tyndall effect occurs when the size of particles in the solution exceeds 1 nm in diameter. Such solutions are actually called false solutions.

In tincture of iodine, the size of particles in solution is less than 1 nm in diameter hence the solution does not exhibit Tyndall effect. Hence, tincture of iodine is a true solution.

Therefore, if the size of particles in solution exceeded 1nm in diameter, Tyndall effect is observed.

Answer:

I hope the link above will be helpful

▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓

[tex]\boxed{\pmb{\green{\sf{3Mg(s) + N_{2}(g)\dashrightarrow Mg_{3}N_{2}(s)}}}}[/tex]

▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓

Answer:

Step 1: Write a balanced chemical equation of the reaction

Step 2: Convert the mass of glucose given to moles of glucose by dividing with the molar mass of glucose, 180 g/mol:

Step 3: Using the mole ratio in the equation of reaction, determine the moles of CO₂ produced:

Step 4: Convert moles of CO₂ to volume in litres of CO₂ at STP:

Explanation:

Fermentation is a complex chemical process whereby microorganisms such as yeast are used in converting carbohydrates such as glucose into ethanol and carbon dioxide under anaerobic conditions:

Step 1: Write a balanced chemical equation of the reaction

Theequation of the fermentation of glucose, C₆H₁₂O₆ at STP is as follows:

C₆H₁₂O₆ (aq) ----> 2 C₂H₅OH (l) + 2 CO₂ (g)

Step 2: Convert the mass of glucose given to moles of glucose by dividing with the molar mass of glucose, 180 g/mol:

Moles of glucose = mass of glucose given/molar mass of glucose = x g/ 1180 g/ mol = x moles of glucose

Step 3: Using the mole ratio in the equation of reaction, determine the moles of CO₂ produced:

From the equation of reaction, 1 mole of C₆H₁₂O₆ produces 2 moles of CO₂.

Therefore, x moles of C₆H₁₂O₆ will produce 2x moles of CO₂

Step 4: Convert moles of CO₂ to volume in litres of CO₂ at STP:

1 mole of a gas at STP has a volume of 22.4 L

1 mole of CO₂ has a volume of 22.4 L

2x moles of CO₂ has a volume of 2x × 22.4 L

Answer:

Showing results for Temperature (°C) 5 Heating Curve for Water 160 140 2 120 100 80 60 40 20 0 "-20" 1 2 3 4 5 6 7 Time (min) 8 9 10 At what temperature does the solid start melting?

Answer:

can only form one hydrogen bond each

Explanation:

can only form one hydrogen bond each

Answer:

Neutron, neutral subatomic particle that is a constituent of every atomic nucleus except ordinary hydrogen. It has no electric charge and a rest mass equal to 1.67493 × 10−27 kg—marginally greater than that of the proton but nearly 1,839 times greater than that of the electron.

Answer:

The correct answer is - Economic concerns may prevent it from solving problems.

Explanation:

Scientific research is influenced by various factors. Science helps in the solving of human problems. However, scientific research can need to be supported by many factors such as Huge amounts of money that need to be invested in performing out particular scientific research to solve problems.

For science, there are requirements of Laboratories and lab supplies such as the equipment and experts need to train the personnel on how to use it.

Thus, economic factors play a huge role in scientific research.

Answer:

Below!

Explanation:

Isotopes are elements with a similar chemical makeup and the same atomic number, but a different atomic mass and number of neutrons . An example of this would be carbon-12, carbon-13, and carbon-14. Three isotopes of the element carbon that have the same 6 protons but have a different neutron count. A simple way to explain isotopes would be to say that they are just different "versions" of an element.

Hope this helps ya! Best of luck <3

The actual specific heat capacity of the silver in the Calorimetry Lab is given as  0.234 J/gK.

Specific heat capacity is the amount of heat required to raise a unit mass of a substance by 1 degree kelvin.

The specific heat capacity of silver or amount of heat required to raise a unit mass of silver metal is 0.234 J/gK.

Thus, the actual specific heat capacity of the silver in the Calorimetry Lab is given as  0.234 J/gK.

Learn more about specific heat capacity here: https://brainly.com/question/21406849

#SPJ1

D. The MOLARITY of the juice DECREASES when water is added to it.

MOLARITY refers to the amount of a substance (solute) in a certain volume of solution. It is a measure of the CONCENTRATION OF A SOLUTION. In chemistry, molarity is calculated by dividing the number of moles of a solute by the volume of the solvent i.e.

MOLARITY (mol/L or M) = number of moles (n)/volume of solvent (V)

* The above equation means that the molarity of a solution is inversely proportional to its volume i.e. as molarity increases, volume decreases and vice versa.

According to this question, water is added to a glass of pure fruit juice (dilution). This means that the volume of the juice will increase. As the volume increases via addition of water, the MOLARITY DECREASES.

Learn more: https://brainly.com/question/20899596

Answer:

Explanation:

I willl go into a bit of detail on the haloform reaction. So the first few steps involve forming an enolate using the base, typically NaOH. THe enolate and go on to do alpha halogenation 3 times. After that, is leaves a trisubstituted alpha methyl carbon with a specific halogen. This is a good leaving group in itself and can carbonyl nucleophillic substitution and turn into a carboxylic acid with a CHZ3- byproduct where Z represents a halogen.

Answer:

D. C₄H₁₀ + 6.5O₂ → 4CO₂ + 5H₂O + heat

Explanation:

The reaction of the combustion of isobutane with oxygen is presented as follows;

C₄H₁₀ + 6.5O₂ → 4CO₂ + 5H₂O + heat

In the above reaction, the number of elements on the reactant side are;

4 carbon, C, atoms, 10 hydrogen, H, atoms, and 13 oxygen, O, atoms

The number of elements on the product side of the above chemical reaction are;

The number of carbon atoms, C = 4

The number of hydrogen atoms, H = 10

The number of oxygen atoms, O = 13

Therefore, the number of atoms on the reactant side of the chemical equation are equal to the number of atoms on the product side, and the combustion reaction for isobutane is balanced.

Answer:

Radiometric dating or radioactive date is the method that uses radioisotope to date the formation of a rock. The age of the rocks will be determined.

Explanation:

Radioactive deterioration is a natural process and results from the unstable atomic core, which releases bits and parts.

These radioactive particles are released as (there are many types). This decline process results in a more equilibrated nucleus, which makes the atom stable when the number of protons and neutrons balances.

This radioactivity is suitable for dating, as a radioactive "parent" item is constantly decaying into a stable "daughter" element.

A single mineral grain or a whole rock may be dated. There are techniques by which the sample is excited in a nuclear reactor and then measured with a mass spectrometer. The isotope (such as in the argon-argon scheme).

Others put mineral grains under a special microscope, fir in the grains with an ionising laser beam that releases the mineral and the isotopes.

The isotopes are measured by a mass spectrometer inside the same machine (an example of this is SIMS analysis).

Answer:

a. 1 x 10^-35

Explanation:

The correct compound given is: [tex]\mathsf{Cu_3(AsO_4)}_2[/tex]

To predict the approximate Ksp value of the given compound, we will need to express the oxidation-reduction half-reaction of the compound and its dissociation, then, we will use the Nernst equation to determine the approximate Ksp value.

To start with the reduction half-reaction:

[tex]\mathsf{Cu_3(AsO_4)_{2}(s) + 6e^- \to 2As O_{4}^{3-}_{(aq)}+3Cu(s) }[/tex]

The oxidation half-reaction is:

[tex]\mathsf{3Cu(s) \to 3CU^{2+}_{(aq)} + 6e^-}[/tex]

The overall cell reaction now is:

[tex]\mathsf{Cu_3(AsO_4)_{2}(s) \to 3Cu^+ (aq) + 2As O_{4}^{3-}_{(aq)} }[/tex]

From the reduction half-reduction, the number of moles of electrons (n) transferred is 6 moles.

By applying the Nernst equation:

[tex]\mathsf{E_{cell} = E^0_{cell} -\dfrac{0.0591V}{n}log [Cu^{2+}]^3[AsO_4^{3-}]^2 }[/tex]

At standard conditions;

The standard cell potential [tex]\mathsf{E^0_{cell} = -0.342 \ V}[/tex]

and [tex]\mathsf{E_{cell} = 0 \ V}[/tex] since it is at equilibrium.

∴

[tex]\mathsf{0 = -0.342 -\dfrac{0.0591V}{6}log [Cu^{2+}]^3[AsO_4^{3-}]^2 } \\ \\ \\ \mathsf{0.342 = -\dfrac{0.0591V}{6}log [Cu^{2+}]^3[AsO_4^{3-}]^2 }[/tex]

[tex]\mathsf{log [Cu^{2+}]^3[AsO_4^{3-}]^2 = \dfrac{-(0.342)*6}{0.0591 }}[/tex]

[tex]\mathsf{log [Cu^{2+}]^3[AsO_4^{3-}]^2 = -34.7}[/tex]

[tex]\mathsf{log [Cu^{2+}]^3[AsO_4^{3-}]^2 \simeq -35}[/tex]

[tex]\mathsf{[Cu^{2+}]^3[AsO_4^{3-}]^2 = 10^{-35}}[/tex]

[tex]\mathbf{K_{sp} = [Cu^{2+}]^3[AsO_4^{3-}]^2 = 1\times 10^{-35}}[/tex]

Answer:

the answer for that is false

Answer:

false

Explanation:

Answer:

International System of Units (SI)

Explanation:

I hope it helps :)

Answer: Science : Chemistry, astronomy , biology , physics , biology ,geology. Notscience : Astrology and theology

Explanation: Astrology and theology are non scientific areas of study.

Answer:

The mole ratio of H : O in ammonium nitrate is 4 : 3.

Explanation:

We are given a compound named ammonium nitrate having formula

There are 3 elements in this compound which are nitrogen, hydrogen and oxygen.

To calculate the mole ratio, we write the ratio of their subscripts. For this compound,