The BODY of the site is what will be displayed on the web page. It contains most of the distinctive content of the web page.
A web page refers to a document exhibited by the browser, which is generally written in the HTML language.
The body of a web page is a big area in the center that contains the most important and distinctive content of a web page.
The body will determine the central content of the HTML document, which will be observable on the web page (e.g., a photo gallery).
Learn more about a web page here:
https://brainly.com/question/16515023
Chassis intrusion detection is an option that can be enabled/disabled in the BIOS setup utility (if a BIOS comes equipped with this feature).Coupled with a hardware sensor mounted insided the computer case, this functionality can be used to check if the case was opened and display a notification alert during next boot.
a. True
b. False
Answer: True
Explanation:
Chassis intrusion detection is simply a vital security feature which is used typically by large corporate networks. It's simply an intrusion detection method which can be used in alerting a system administrator when there's a situation whereby a person opens a computer case which can then be investigated in order to know if the computer hardware has been tampered with.
It should also be noted that the chassis intrusion detection can then be either enabled or disabled in the BIOS setup utility if a BIOS comes equipped with this feature.
The correct option is True.
Assume a TCP sender is continuously sending 1,090-byte segments. If a TCP receiver advertises a window size of 5,718 bytes, and with a link transmission rate 26 Mbps an end-to-end propagation delay of 22.1 ms, what is the utilization
Answer:
for the 5 segments, the utilization is 3.8%
Explanation:
Given the data in the question;
segment size = 1090 bytes
Receiver window size = 5,718 bytes
Link transmission rate or Bandwidth = 26 Mbps = 26 × 10⁶ bps
propagation delay = 22.1 ms
so,
Round trip time = 2 × propagation delay = 2 × 22.1 ms = 44.2 ms
we determine the total segments;
Total segments = Receiver window size / sender segment or segment size
we substitute
Total segments = 5718 bytes / 1090 bytes
Total segments = 5.24587 ≈ 5
Next is the throughput
Throughput = Segment / Round trip
Throughput = 1090 bytes / 44.2 ms
1byte = 8 bits and 1ms = 10⁻³ s
Throughput = ( 1090 × 8 )bits / ( 44.2 × 10⁻³ )s
Throughput = 8720 bits / ( 44.2 × 10⁻³ s )
Throughput = 197.285 × 10³ bps
Now Utilization will be;
Utilization = Throughput / Bandwidth
we substitute
Utilization = ( 197.285 × 10³ bps ) / ( 26 × 10⁶ bps )
Utilization = 0.0076
Utilization is percentage will be ( 0.0076 × 100)% = 0.76%
∴ Over all utilization for the 5 segments will be;
⇒ 5 × 0.76% = 3.8%
Therefore, for the 5 segments, the utilization is 3.8%
which of the statement is use to skip the loop and continue woth the next iteration ?
Answer:
C – continue statement with example. The continue statement is used inside loops. When a continue statement is encountered inside a loop, control jumps to the beginning of the loop for next iteration, skipping the execution of statements inside the body of loop for the current iteration.
Explanation:
PLS mark brainliest
hope it helped u
Write a program that inputs a line of text tokenizing the line with function strtok and outputs the tokens in reverse order i.e. last token in the sentence is printed first and first token is printed last. The user must be able to specify at most 80 characters in the sentence.
Answer and Explanation:
var gettext= prompt("please enter text");
function strtok(gettext){
var splitString = gettext.split("");
if(splitString.length<=80){
var reverseArray = splitString.reverse();
var joinArray = reverseArray.join("");
return joinArray;}
else{
Alert("too many characters");
}
}
/* we first ask for user input using the prompt function. We save this in a variable gettext which we pass to the strtok function. This function first splits the text and makes it an array so we are able to count how many characters the user enters and set an if..else condition to handle characters that may be more than 80. The reverse and join functions are then used respectively to reverse and return the string.*/
Develop a program that will maintain an ordered linked list of positive whole numbers. Your program will provide for the following options: a. Add a number b. Delete a number c. Search for a number d. Display the whole list of numbers At all times, the program will keep the list ordered (the smallest number first and the largest number last).
Answer:
#include <iostream>
using namespace std;
struct entry
{
int number;
entry* next;
};
void orderedInsert(entry** head_ref,entry* new_node);
void init_node(entry *head,int n)
{
head->number = n;
head->next =NULL;
}
void insert(struct entry **head, int n)
{
entry *nNode = new entry;
nNode->number = n;
nNode->next = *head;
*head = nNode;
}
entry *searchNode(entry *head, int n)
{
entry *curr = head;
while(curr)
{
if(curr->number == n)
return curr;
curr = curr->next;
}
}
bool delNode(entry **head, entry *ptrDel)
{
entry *curr = *head;
if(ptrDel == *head)
{
*head = curr->next;
delete ptrDel;
return true;
}
while(curr)
{
if(curr->next == ptrDel)
{
curr->next = ptrDel->next;
delete ptrDel;
return true;
}
curr = curr->next;
}
return false;
}
void display(struct entry *head)
{
entry *list = head;
while(list!=NULL)
{
cout << list->number << " ";
list = list->next;
}
cout << endl;
cout << endl;
}
//Define the function to sort the list.
void insertionSort(struct entry **h_ref)
{
// Initialize the list
struct entry *ordered = NULL;
// Insert node to sorted list.
struct entry *current = *h_ref;
while (current != NULL)
{
struct entry *next = current->next;
// insert current in the ordered list
orderedInsert(&ordered, current);
// Update current
current = next;
}
// Update the list.
*h_ref = ordered;
}
//Define the function to insert and traverse the ordered list
void orderedInsert(struct entry** h_ref, struct entry* n_node)
{
struct entry* current;
/* Check for the head end */
if (*h_ref == NULL || (*h_ref)->number >= n_node->number)
{
n_node->next = *h_ref;
*h_ref = n_node;
}
else
{
//search the node before insertion
current = *h_ref;
while (current->next!=NULL &&
current->next->number < n_node->number)
{
current = current->next;
}
//Adjust the next node.
n_node->next = current->next;
current->next = n_node;
}
}
int main()
{
//Define the structure and variables.
char ch;int i=0;
entry *newHead;
entry *head = new entry;
entry *ptr;
entry *ptrDelete;
//Use do while loop to countinue in program.
do
{
//Define the variables
int n;
int s;
int item;
char choice;
//Accept the user choice
cout<<"Enter your choice:"<<endl;
cout<<"a. Add a number"<<endl
<<"b. Delete a number"<<endl
<<"c. Search for a number"<<endl
<<"d. Display the whole list of numbers"<<endl;
cin>>choice;
//Check the choice.
switch(choice)
{
//Insert an item in the list.
case 'a' :
// cin>>item;
cout<<"Enter the element:"<<endl;
cin>>item;
//To insert the first element
if(i==0)
init_node(head,item);
//To insert remaining element.
else
{
ptr = searchNode(head,item);
//Check for Duplicate data item.
if(ptr==NULL)
{
insert(&head,item);
}
else
{
cout<<"Duplicate data items not allowed";
cout<<endl<<"EnterAgain"<<endl;
cin>>item;
insert(&head,item);
}
}
insertionSort(&head);
i=i+1;
break;
//Delete the item from the list
case 'b' :
int numDel;
cout<<"Enter the number to be deleted :"<<endl;
cin>>numDel;
//Locate the node.
ptrDelete = searchNode(head,numDel);
if(ptrDelete==NULL)
cout<<"Element not found";
else
{
if(delNode(&head,ptrDelete))
cout << "Node "<< numDel << " deleted!\n";
}
break;
//Serach the item in the list.
case 'c' :
cout<<"Enter the element to be searched :";
cout<<endl;
cin>>s;
ptr = searchNode(head,s);
if(ptr==NULL)
cout<<"Element not found";
else
cout<<"Element found";
break;
//Display the list.
case 'd' :
display(head);
break;
default :
cout << "Invalid choice" << endl;
break;
}
//Ask user to run the program again
cout<<endl<<"Enter y to countinue: ";
cin>>ch;
}while(ch=='y'||ch=='Y');
return 0;
}
output:
So, I need to use an external mic for my phone, but the problem is that I need a "dual mic adapter". My dad gave me an "audio splitter" instead. Can I use the audio splitter instead in order to connect the external mic to my phone???
But you can't use this device alone to connect two microphones to your USB C port and expect it to have usable volume. So the description is somewhat misleading ...
3. Using Assume the following list of keys: 36, 55, 89, 95, 65, 75, 13, 62, 86, 9, 23, 74, 2, 100, 98 This list is to be sorted using the quick sort algorithm as discussed in this chapter. Use pivot as the middle element of the list. a. Give the resulting list after one call to the function partition. b. What is the size of the list that the function partition partitioned
Answer:
a. 36, 55, 13, 9, 23, 2, 62, 86, 95, 65,74, 75, 100, 98, 89
b. 15
Explanation:
Give three reasons to use a hard drive as mass storage.
Answer:
With that in mind, let's take a look at five places where hard drives shine.
Backups and Archives. ...
Media Libraries. ...
Large Capacity Storage. ...
NAS Drives and Security. ...
RAID Arrays. ...
Other Uses.
1.which screen appears after the password is typed (welcome, lock)
Answer:
it should be the welcome screen I will hope so lol
Answer:
welcomeyou don't know that much also
hi, please help me, solution.
Answer:
error: incompatible types
Explanation:
Given
The attached code
Required
The output
Variable "a" is declared as float
While p is declared as a pointer to an integer variable
An error of incompatible types will be returned on line 3, int *p = a;
Because the variables are not the same.
To assign a to p*, we have to use type casting.
Hence, (b) is correct
A hammer tool can only be used by one technician at a time to perform hitting. Accordingly, you have developed a Hammer class with a hit method. Objects of class Hammer are used to simulate different hammers, while threads are created to simulate users. Which situation needs to add the synchronized keyword to the hit method
Answer:
Explanation:
The synchronized keyword needs to be active on the hit method at any point where 2 or more threads (users) exists at any given moment. This is in order to prevent two or more users from trying to perform a hammer hit at the same time. This is what the synchronized keyword is used for. It prevents the more than one thread from calling the specific method at the same time. Instead it adds the action to a sequence so that the second thread calls the hit method only after the first thread's hit method finishes.
write a java program that prompts the user to enter scores (each number an integer from 0 to 10) and prints the following output: how many scores entered the highest score the lowest score the average of all the scores the average with the highest and lowest score not counted if the user enters less than 3 scores print an error message instead of the output above
Answer:
Explanation:
The following is written in Java. It continues asking the user for inputs until they enter a -1. Then it saves all the values into an array and calculates the number of values entered, the highest, and lowest, and prints all the variables to the screen. The code was tested and the output can be seen in the attached image below.
import java.util.ArrayList;
import java.util.Arrays;
import java.util.Scanner;
class Brainly {
public static void main(String[] args) {
Scanner in = new Scanner(System.in);
int count = 0;
int highest, lowest;
ArrayList<Integer> myArr = new ArrayList<>();
while (true) {
System.out.println("Enter a number [0-10] or -1 to exit");
int num = in.nextInt();
if (num != -1) {
if ((num >= 0) && (num <= 10)) {
count+= 1;
myArr.add(num);
} else {
System.out.println("Wrong Value");
}
} else {
break;
}
}
if (myArr.size() > 3) {
highest = myArr.get(0);
lowest = myArr.get(0);
for (int x: myArr) {
if (x > highest) {
highest = x;
}
if (x < lowest) {
lowest = x;
}
}
System.out.println("Number of Elements: " + count);
System.out.println("Highest: " + highest);
System.out.println("Lowest : " + lowest);
} else {
System.out.println("Number of Elements: " + count);
System.out.println("No Highest or Lowest Elements");
}
}
}
Write the code for the following problem.
Add a function to problem to display the last name and highest, last name and lowest and average exam score. Hint: for highest initialize a variable to 0 (high_var). If the array value is higher than the high_var then set high_var to the array value and set high_index to the position of the array. Proceed through the array until you get to the end. Do the same for finding the lowest using low_var set to 999 (higher than the highest value). For the average score, sum all the exam scores as you proceed through the loop. Use a for loop to go through each occurrence of the arrays. Note you can do all this with one for loop but if it makes more sense to you to use multiple for loops that is ok too.
Answer:
no
Explanation:
Write a recursive function called DrawTriangle() that outputs lines of '*' to form a right side up isosceles triangle. Function DrawTriangle() has one parameter, an integer representing the base length of the triangle. Assume the base length is always odd and less than 20. Output 9 spaces before the first '*' on the first line for correct formatting.
Answer:
Code:-
# function to print the pattern
def draw_triangle(n, num):
# base case
if (n == 0):
return;
print_space(n - 1);
print_asterisk(num - n + 1);
print("");
# recursively calling pattern()
pattern(n - 1, num);
# function to print spaces
def print_space(space):
# base case
if (space == 0):
return;
print(" ", end = "");
# recursively calling print_space()
print_space(space - 1);
# function to print asterisks
def print_asterisk(asterisk):
# base case
if(asterisk == 0):
return;
print("* ", end = "");
# recursively calling asterisk()
print_asterisk(asterisk - 1);
# Driver Code
n = 19;
draw_triangle(n, n);
Output:-
# Driver Code n = 19;| draw_triangle(n, n);
Sites like Zillow get input about house prices from a database and provide nice summaries for readers. Write a program with two inputs, current price and last month's price (both integers). Then, output a summary listing the price, the change since last month, and the estimated monthly mortgage computed as (current_price * 0.051) / 12. Output each floating-point value with two digits after the decimal point, which can be achieved as follows: print('{:.2f}'.format(your_value))
Answer:
The program in Python is as follows:
current_price = int(input("Current Price: "))
last_price = int(input("Last Month Price: "))
change = current_price - last_price
mortgage = (current_price * 0.051) / 12
print('Change: {:.2f} '.format(change))
print('Mortgage: {:.2f}'.format(mortgage))
Explanation:
This gets input for current price
current_price = int(input("Current Price: "))
This gets input for last month price
last_price = int(input("Last Month Price: "))
This calculates the price change
change = current_price - last_price
This calculates the mortgage
mortgage = (current_price * 0.051) / 12
This prints the calculated change
print('Change: {:.2f} '.format(change))
This prints the calculated monthly mortgage
print('Mortgage: {:.2f}'.format(mortgage))
Answer:
current_price = int(input())
last_months_price = int(input())
change = current_price - last_months_price
mortgage = current_price * 0.051 / 12
print('This house is $', end= '')
print(current_price, end= '. ')
print('The change is $', end= '')
print(change, end= ' ')
print('since last month.')
print('The estimated monthly mortgage is $', end= '')
print(mortgage, end='0.\n')
Based on the screenshot below which letter do you select to sort the items in an alphabetical order?
Answer:
the smallest number start with the first number of the alphabet
A light rag is striking the surface of earth. Which factor would make the light ray more likely to be absorbed than reflected?
Answer:
The answer is D.
Explanation:
because the other answers doesn't make sense.
Which of these is a tool for creating mobile apps?
Appy Pie
C#
Apple Pie
C++
Answer:
C++
Explanation:
C++ is used in application development
Write a function named square_list that takes as a parameter a list of numbers and replaces each value with the square of that value. It should not return anything - it should mutate the original list.
Answer:
The function is as follows:
def square_list(myList):
for i in range(len(myList)):
myList[i] = myList[i]**2
print(myList)
Explanation:
This defines the function
def square_list(myList):
This iterates through the list elements
for i in range(len(myList)):
This squares each list element
myList[i] = myList[i]**2
This prints the mutated list
print(myList)
write a program that keeps taking integers until the user enters in python
int main {
//variables
unsigned long num = 0;
std::string phrase = " Please enter your name for confirmation: " ;
std::string name;
//codes
std::cout << phrase;
std::cin>> name;
while ( serial.available() == 0 ) {
num++;
};
if ( serial.avaliable() > 0 ) {
std::cout << " Thank you for your confirmation ";
};
};
Write a program that lets a user enter N and that outputs N! (N factorial, meaning N*(N-1)*(N-2)*..\.\*2*1). Hint:Use a loop variable i that counts from total-1 down to 1. Compare your output with some of these answers: 1:1, 2:2, 3:6, 4:24, 5:120, 8:40320.
Answer:
The program is as follows:
num = int(input("Number: "))
fact = 1
for i in range(1,num+1):
fact*=i
print(fact)
Explanation:
This gets integer input from the user
num = int(input("Number: "))
This initializes factorial to 1
fact = 1
The following iteration calculates the factorial of the integer input
for i in range(1,num+1):
fact*=i
This prints the calculated factorial
print(fact)
Differentiate between TCP Reno and TCP Tahoe.
Answer:
They have different words
Explanation:
I hope it helps choose me the brainest
Management of software development consist of?
Chọn một:
a. Process
b. People
c. Project
d. All of the above
Answer:
d. All of the above
Explanation:
A software can be defined as a set of executable instructions (codes) or collection of data that is used typically to instruct a computer how to perform a specific task and to solve a particular problem.
A software development life cycle (SDLC) can be defined as a strategic process or methodology that defines the key steps or stages for creating and implementing high quality software applications.
In Computer science, management of software development consist of;
a. Process: it involves the stages through which a software application is analyzed, designed, developed, tested, etc.
b. People: it refers to the individuals involved in the software development process.
c. Project: it's the entirety of the stages a software goes through before it gets to the end user.
Based on the naming recommendations in the book, which of the following is a good identifier for a variable that will be used to hold an employee’s phone number? a. EmployeePhoneNumber b. emphonumber c. employee_phone_number d. empPhoneNum
Answer:
A good identifier for a variable that will be used to hold an employee’s phone number is:
a. EmployeePhoneNumber
Explanation:
An identifier is a string that uniquely identifies or names the entity or an object. The object or entity may be a constant, variable, structure, function, etc. Identifiers can be formed from uppercase and lowercase letters, digits, and underscores. Meaningful identifiers mostly favor the use of long descriptive names like EmployeePhoneNumber. However, the other options can still be used.
(viii) Word does not allow you to customize margins.
true/false:-
a computer cannot store the data and information for your future use true or false
John downloaded the manual for his TV, called manual-of-tv.pdf, from the manufacturer's website. After he clicked twice on the document he was informed by Windows that the file could not be opened. Which software must John install to solve the problem?
Jhon must download third party pdf viewer softwares to open the .pdf file.
For example
Adobe Acrobat Reader
Must click thanks and mark brainliest
10 features of the ribbon in microsoft word
Answer:yes
Explanation:
Yup
What is the relationship between an organization’s specific architecture development process and the Six-Step Process?
Answer:
It is a method of developing architecture in various stages
Explanation:
The organization-specific architecture developmental process is a tested and repeated process for developing architecture. It made to deal with most of the systems. It describes the initial phases of development. While the six step process is to define the desired outcomes, Endorse the process, establish the criteria and develop alternatives. Finally to document and evaluate the process.How can a DevOps team take advantage of Artificial Intelligence (AI)?
Answer:
By using AI to collate data from multiple sources and assess existing automation to improve efficiency.
Artificial Intelligence is indeed a technique that allows machines to imitate the conduct of people. Machine Learning, even so, is an AI subset.
AI/ML could indeed help the creativity and innovation of DevOps team members by eradicating inefficient information. By their operations and maintenance life cycle and allowing the staff to collaborate on the quantity, speed, and variability of data. It could lead to automated improvements as well as improved productivity for the DevOps team.Therefore, By using AI, data from various sources is gathered and established automation is assessed to make it more efficient.
Learn more:
brainly.com/question/10054757
