Diisopropyl ether reacts with concentrated aqueous HI to form two initial organic products

a. True
b. Fasle

Answer:

1. Because the rules will keep you safe it prevents you from getting hurt.

2.i) don't taste chemical

ii) Always wear protective gears

iii) be careful with tool

iv) wear protective gloves

Explanation:

help everyone get out quickly

Answer:

its letter c

Explanation:

I hope this help

The reaction of silver and nitric acid is given with the chemical equation as Ag + 2 H⁺ + HNO₃ → NO₂ + Ag⁺ + H₂O + 2e⁻. Thus, option C is correct.

Redox reaction can be given as the chemical reaction in which one of the reactants is oxidized and the other gets reduced. Oxidation is defined as the loss of electrons and gain of hydrogen, while reduction is defined as the gain of electrons and loss of hydrogen.

The change in the oxidation and reduction changes the oxidation states of the elements, and thereby mediated the formation of a more stable chemical compound.

The reaction of silver with nitric acid forms the release of hydrogen from nitric acid, thereby the compound gets reduced, while with the loss of electrons, the silver gets oxidized.

The chemical equation for the same can be given as:

Ag + 2 H⁺ + HNO₃ → NO₂ + Ag⁺ + H₂O + 2e⁻

Thus, option C is correct.

Learn more about redox reaction, here:

https://brainly.com/question/13293425

#SPJ5

Answer:

a. True

Explanation:

Answer:

This question is asking to find the new temperature

The answer for the final temperature is 429.73K

Explanation:

Using Charles law equation as follows:

V1/T1 = V2/T2

Where;

V1 = initial volume (L)

V2 = final volume (L)

T1 = initial temperature (K)

T2 = final temperature (K)

According to this question;

V1 = 3.0L

V2 = 4.4L

T1 = 20°C = 20 +273 = 293K

T2 = ?

Using V1/T1 = V2/T2

3/293 = 4.4/T2

Cross multiply

293 × 4.4 = 3 × T2

1289.2 = 3T2

T2 = 1289.2 ÷ 3

T2 = 429.73K

Answer:

Specific gravity of the saturated solution is 2

Explanation:

The specific gravity is defined as the ratio between density of a solution (In this case, saturated solution of potassium iodide, KI) and the density of water. Assuming density of water is 1:

Specific gravity  = Density

The density is the ratio between the mass of the solution and its volume.

In 100mL of water, the mass of KI that can be dissolved is:

100mL * (1g KI / 0.7mL) = 143g of KI

That means all the 100g of KI are dissolved (Mass solute)

As the volume of water is 100mL, the mass is 100g (Mass solvent)

The mass of the solution is 100g + 100g = 200g

In a volume of 100mL, the density of the solution is:

200g / 100mL = 2g/mL.

The specific gravity has no units, that means specific gravity of the saturated solution is 2

Answer:

Hence the Volume of Gas = 3.04 L.

Explanation:  

pressure of dry gas = 765.3 - 24.3 = 741 mmhg  

Temperature of gas = 24.4+273.15 = 297.55 k  

No of mol of gas = 0.498/4 = 0.1245 mol  

R = gas constant = 0.0821 l.atm.k-1.mol-1  

From ideal-gas equation

PV = nRT  

(741/760) x v = 0.1245 x 0.0821 x 297.55  

V = Volume of Gas = 3.04 L

Answer:

ΔH = 2.68kJ/mol

Explanation:

The ΔH of dissolution of a reaction is defined as the heat produced per mole of reaction. We have 3.15 moles of the solid, to find the heat produced we need to use the equation:

q = m*S*ΔT

Where q is heat of reaction in J,

m is the mass of the solution in g,

S is specific heat of the solution = 4.184J/g°C

ΔT is change in temperature = 11.21°C

The mass of the solution is obtained from the volume and the density as follows:

150.0mL * (1.20g/mL) = 180.0g

Replacing:

q = 180.0g*4.184J/g°C*11.21°C

q = 8442J

q = 8.44kJ when 3.15 moles of the solid react.

The ΔH of the reaction is:

8.44kJ/3.15 mol

= 2.68kJ/mol

Answer:

which class are you please mention

Answer:

14720000

Explanation:

1 kg = 1000000 mg

14.72 kg = 14.72 x 1000000

=14720000

Please Mark me brainliest

Answer:

Neither Tech A nor B is correct

Explanation:

Combustion is a chemical reaction that occurs when a chemical molecule(s) interacts quickly with oxygen and produces heat.

When hydrocarbon undergoes a complete combustion reaction, they produce water and CO2.

Tech B is also incorrect because the main purpose of a catalytic converter is to accelerate and speed up the chemical reaction rates, Hence, they are not involved in chemical reaction formation. Catalytic converters are utilized as a control device in exhaust emission to lessen the effect of toxic gas fumes.

Explanation:

here are your dissolutions

To calculate the atoms of an element in a given molecule, we need to multiply stoichiometry by the number that is written on the foot of that element. Therefore, the balanced equation are

CH[tex]_3[/tex]COOH + KOH [tex]\rightarrow[/tex]CH[tex]_3[/tex]COOK + H[tex]_2[/tex]O

H[tex]_2[/tex]CO[tex]_3[/tex] (aq) + 2 NaOH(aq) [tex]\rightarrow[/tex]Na[tex]_2[/tex]CO[tex]_3[/tex](aq) + 2 H[tex]_2[/tex]O

HNO[tex]_3[/tex] + Ba(OH)[tex]_2[/tex][tex]\rightarrow[/tex]Ba(NO[tex]_3[/tex])[tex]_2[/tex]+ H[tex]_2[/tex]O

Balanced equation is the one in which the total number of atoms of a species on reactant side is equal to the total number of atoms on product side. The mass of the overall reaction should be conserved. There are so many types of chemical reaction reaction like combination reaction, displacement reaction.

The other characteristic of balanced reaction is that physical state should be written with each compound or molecule on reactant and product side. Physical state should be written in brackets. s means solid, l means liquid, g means gas.

The balanced equation can be written as

CH[tex]_3[/tex]COOH + KOH [tex]\rightarrow[/tex]CH[tex]_3[/tex]COOK + H[tex]_2[/tex]O

H[tex]_2[/tex]CO[tex]_3[/tex] (aq) + 2 NaOH(aq) [tex]\rightarrow[/tex]Na[tex]_2[/tex]CO[tex]_3[/tex](aq) + 2 H[tex]_2[/tex]O

HNO[tex]_3[/tex] + Ba(OH)[tex]_2[/tex][tex]\rightarrow[/tex]Ba(NO[tex]_3[/tex])[tex]_2[/tex]+ H[tex]_2[/tex]O

Therefore, the balanced equation are

CH[tex]_3[/tex]COOH + KOH [tex]\rightarrow[/tex]CH[tex]_3[/tex]COOK + H[tex]_2[/tex]O

H[tex]_2[/tex]CO[tex]_3[/tex] (aq) + 2 NaOH(aq) [tex]\rightarrow[/tex]Na[tex]_2[/tex]CO[tex]_3[/tex](aq) + 2 H[tex]_2[/tex]O

HNO[tex]_3[/tex] + Ba(OH)[tex]_2[/tex][tex]\rightarrow[/tex]Ba(NO[tex]_3[/tex])[tex]_2[/tex]+ H[tex]_2[/tex]O

Learn more about the balanced equation, here:

https://brainly.com/question/7181548

#SPJ5

Answer:

carbons that are in different environments

Explanation:

When molecules are asymmetric every carbon will have its own peak since they are all different and will show up with a different ppm shift.  If the molecule has symmetry the carbons that are symmetrical (in the same environment) will have the same ppm shift and will therefore show up as one peak.  

An example of a molecule with symmetry is isopropanol which has 3 carbons but only two carbon peaks since the two methyl groups are symmetrical.

An example of a molecule with no symmetry is 3-Nitroaniline where the groups coming off of the benzene ring makes each of the 6 carbons be in different environments and there for all 6 carbons will have different ppm shifts.  The result is a carbon NMR that has 6 peaks.

I hope this helps.  Let me know if anything is unclear.

Carbon NMR spectroscopy produces a spectrum of only carbon-13 nuclei in a sample. The number of carbon signals in the spectrum corresponds to the number of different number of carbon  in the molecule.

The study of spectroscopy involves measuring and analyzing the electromagnetic spectra that emerge from the interaction of electromagnetic radiation with matter as a function of the radiation's wavelength or frequency.

Three indications Pentane has a mirror plane that runs directly through the center, just like in the ethane example. Three different sorts of carbon atoms may be seen in the molecule of pentane if we rotate it 180 degrees at a time.

Thus,  The number of carbon signals in the spectrum corresponds to the number of different number of carbon  in the molecule.

To learn more about spectroscopy, follow the link;

https://brainly.com/question/5402430

#SPJ2

Answer:

C

Explanation:

If he can't read his computer screen. Means his eyes have problem

A new member of your team is visually impaired. He's having a hard time reading his computer screen.  value diversity require computer usage. 12 Tell him that he might want to schedule an eye exam. Therefore, option C is correct.

Institutions and community members who value diversity do so in order to recognize the advantages of both their differences and commonalities. They make a deliberate effort to forge enduring connections between individuals and organizations with a broad membership.

When people's unique qualities, abilities, interests, and viewpoints are recognized and supported, they develop a stronger sense of self and health and achieve better results in their academic and professional endeavors.

Although diversity and inclusion are related ideas, they are not the same thing. Diversity has to do with representation or how something is put together. The degree to which the contributions, presence, and viewpoints of other groups of individuals are appreciated and incorporated into a setting is referred to as inclusion.

Thus, option C is correct.

To learn more about value diversity, follow the link;

https://brainly.com/question/13375809

#SPJ2

Answer:

smallest mass necessary to

Explanation:

The critical mass for a fissionable material is the smallest and the lowest quantity of a particular fissile material required to generate a self-sustaining fission chain reaction under specified conditions. The size's features are determined by a number of variables. Examples include;

The type of fissile material employed, its purity as well as concentration, the shape of the surrounding reaction system e.t.c.

Answer:

Fill in the blanks with the terms that complete the sentences about nuclear power plants.

Without a critical mass of fissionable material, a nuclear reaction cannot be sustained. The turbine is powered by steam.

Explanation:

The answers to both parts are marked in bold. I just answered these questions on Edge and they were both correct. Hope this helps. Please mark my answers as the brainiest. THANK YOU!!!!!!!!!!!!!!!!!!!

Answer:

Explanation:

nFeSo4=3.36/152

nkmno4=1/5nFeSO4

V=17.68 ml

Answer:

Solution given:

1 mole of KCl[tex]\rightarrow [/tex]22.4l

1 mole of KCl[tex]\rightarrow [/tex]74.55g

we have

0.14 mole of KCl[tex]\rightarrow [/tex]74.55*0.14=10.347g

74.55g of KCl[tex]\rightarrow [/tex]22.4l

10.347 g of KCl[tex]\rightarrow [/tex]22.4/74.55*10.347=3.11litre

volume of each solution contains 0.14 mol of KCl contain 3.11litre.

[tex]\:[/tex]

1 mole of KCl → 22.4l

1 mole of KCl → 74.55g

we have

0.14 mole of KCl → 74.55*0.14=10.347g

74.55g of KCl  → 22.4l

10.347 g of KCl → 22.4/74.55*10.347=3.11litre

volume of each solution contains 0.14 mol of KCl contain 3.11litre.

Answer:

YES STEEL CAN TURN INTO GAS .

Answer: yes it can!

Explanation:

Explanation:

one thing to know is that higher surface area = higher boiling point.

NaCl has the smallest surface area, so it's the first one.

H2O has less surface area than methane, so it's second.

Methane has more surface area than H20, so it's third.

The big molecule has the most surface area, so it's last

Temperature measures the average kinetic energy of particles of the substances. Melting point is directly proportional to surface area. Therefore, the correct option is option C.

Temperature is used to measure degree or intensity of heat of a particular substance. Temperature is measured by an instrument called thermometer.

Temperature can be measured in degree Celsius °c, Kelvin k or in Fahrenheit. Temperature is a physical quantity. Heat always flow from higher temperature source to lower temperature source.

We can convert these units of temperature into one another. The relationship between degree Celsius and Fahrenheit can be expressed as:

°C={5(°F-32)}÷9

Melting point is directly proportional to surface area. NaCl has the smallest surface area. Water has less surface area than methane. Methane has more surface area than H[tex]_2[/tex]O.

Therefore, the correct option is option C.

To know more about temperature, here:

https://brainly.com/question/13694966

#SPJ2

Answer:

B. 1.65 L

Explanation:

Step 1: Write the balanced equation

2 SO₂(g) + O₂(g) ⇒ 2 SO₃(g)

Step 2: Calculate the moles of SO₂

The pressure of the gas is 1.20 atm and the temperature 25 °C (298 K). We can calculate the moles using the ideal gas equation.

P × V = n × R × T

n = P × V / R × T

n = 1.20 atm × 1.50 L / (0.0821 atm.L/mol.K) × 298 K = 0.0736 mol

Step 3: Calculate the moles of SO₃ produced

0.0736 mol SO₂ × 2 mol SO₃/2 mol SO₂ = 0.0736 mol SO₃

Step 4: Calculate the volume occupied by 0.0736 moles of SO₃ at STP

At STP, 1 mole of an ideal gas occupies 22.4 L.

0.0736 mol × 22.4 L/1 mol = 1.65 L

Answer: The property of magnesium that is exhibited by it is DUCTILITY. The correct option is A.

Explanation:

Magnesium is a member of the alkaline earth metals. It occurs in nature, only in the combined state, as Epsom salt, dolomite and in many trioxosilicates( IV) including talc and asbestos. They have the following physical properties:

--> Appearance: they are silvery-white solids

--> Relative density: It has a relative density of 1.74

--> DUCTILITY: it's very ductile in nature

--> melting point: it has a melting point of 660°C.

--> Conductivity: They are good conductor of heat and electricity.

Furthermore, DUCTILITY is the physical property of a metal associated with the ability to be hammered thin or stretched into wire without breaking. A metal such as magnesium can therefore be coiled as a thin ribbon without fracturing due to its ductile physical properties.

Explanation:

From the question given above, the following data were obtained:

Molarity of stock solution (M₁) = 1.2 M

Molarity of diluted solution (M₂) = 0.5 M

Volume of diluted solution (V₂) = 100 mL

The volume of stock solution needed can be obtained by using the dilution formula as illustrated below:

1.2 × V₁ = 0.5 × 100

1.2 × V₁ = 50

Divide both side by 1.2

V₁ = 50 / 1.2

Thus, 42 mL of the stock solution is needed.

Learn more: https://brainly.com/question/24219233

Answer:

They need 41.7 mL of the original stock solution.

Explanation:

We can use the following equation for dilutions:

Cc x Vc = Cd x Vd

Where Cc and Vc are the concentration and volume values in the concentrated condition, whereas Cd and Vd are the concentration and volume values in the diluted condition.

The concentrated solution is the original stock solution, and it has:

Cc = 1.2 M

The diluted solution must be:

Cd = 0.500 M

Vd = 100 mL

So, we have to calculate Vc. For this, we replace the data in the equation:

[tex]V_{c} = \frac{C_{d} V_{d} }{C_{c} } = \frac{(0.500 M)(100 mL)}{1.2 M} = 41.7 mL[/tex]

Therefore, 41.7 mL of 1.2 M original stock solution are required to make 100  mL of a diluted solution with a concentration of 0.500 M.

Solution :

A Grignard compound or a Grignard reagent is defined as a chemical compound having a generic formula of  R−Mg−X.

Here, X = halogen

          R = organic group

The Grignard reagents are obtained by treating the organic halide  with a magnesium metal.

In the context, when  trans-1-bromo-1-butene is reacted with magnesium, a Grignard reagent is produced.

When this Grignard reagent is reacted with an ethanol, the following product is obtained in the attachment :

Explanation:

From the question given above, the following data were obtained:

Half-life (t½) = 9.7 days

Time (t) = 60 days

Next, we shall determine the number of half-lives that has elapsed. This can be obtained as follow:

Half-life (t½) = 9.7 days

Time (t) = 60 days

Number of half-lives (n) =?

n = t / t½

Finally, we shall determine the percentage remaining. This can be obtained as follow:

Let the original amount be N₀

Let the amount remaining be N

Number of half-lives (n) = 60 / 9.7

N = N₀ / 2ⁿ

Divide both side by N₀

N/N₀ = 1/2ⁿ

N/N₀ = 1 / 2⁽⁶⁰÷⁹•⁷⁾

N/N₀ = 0.0137

Multiply by 100 to express in percentage

N/N₀ = 0.0137 × 100

Therefore, the percentage remaining after 60 days is 1.37%

Learn more: https://brainly.com/question/14883322

Answer:

A molecular formula consists of the chemical symbols for the constituent elements followed by numeric subscripts describing the number of atoms of each element present in the molecule.

Solution :

[tex]H_2CO_3[/tex] is considered a diprotic acid.

Sp it can dissociate in solution by giving two protons.

Chemical equations for the first step of carbonic acid is :

First ionization

[tex]$H_2CO_3(aq) + H_0(1) \rightleftharpoons H_.O^+(aq) + HCO_3^-(aq)$[/tex]

Equilibrium constant expression is

[tex]$K_{a}_{1}=\frac{[H_3O^+][HCO_3^-]}{[H_2CO_3]}$[/tex]

Second ionization -

[tex]$HCO_3^-(aq) + H_2O(l) \rightleftharpoons H_3O^+(aq) + CO_3^{2-}(aq)$[/tex]

Equilibrium constant expression is

[tex]$K_{a2}=\frac{[H_3O^+][CO_3^{2-}]}{[HCO_3^-]}$[/tex]

Answer:

In the laboratory, methane is formed by heating sodium ethanoate with a mixture of sodium hydroxide and calcium oxide, called soda lime, on heating in the presence of a catalyst, calcium oxide, the -COONa group from sodium ethanoate is replaced by the hydrogen atom from sodium hydroxide, forming methane and sodium

Explanation:

Answer:

a) 4p ⇒ 4s  transition is Allowed

b) 3d ⇒ 4s transition not allowed

Explanation:

a) 4p ⇒ 4s  transition

This transition is allowed because for a 4p state; l = 1 and for a 4s state I = 0

hence Δl = 1 - 0 = 1

Energy of 4p ( Ei ) = 3.75eV

Energy of 4s ( E2 ) = 3.19 eV

where : λ = 1240 eV nm / ( E₂ - E₁ )

                = 2214 nm ≈ 2.214 μm

b) 3d ⇒ 4s transition

This transition is not allowed  

a 3d state , l = 2 while for 4s state l = 0

hence Δl = 2 - 0 = 2

therefore the transition is not allowed

Answer:

C6H12O2 is the formula for Methyl pentanoate