In studying effects of collisions between galaxies, astronomers usually make use of space telescopes.
Astronomy deals with the study of outer space. The study focuses on planets and other celestial bodies. Generally telescopes are used to study outer space. The particular type of telescope that is used depends on the need.
In studying effects of collisions between galaxies, astronomers usually make use of space telescopes.
Learn more: https://brainly.com/question/556195
A mechanical pencil is 14 cm long. What is its length in mm?
Answer:
140mm................
Why is the energy supplied by the cooker greater than that calculated in part (a)
Answer:
136000 J or 136 kJ
Explanation:
Formula
Heat = m * c * deltaH
Givens
m= 0.5 kg
c = 3400 J / (kg * oC)
Deltat = (100oC – 20oC)
deltat = 80oC
Solution
Heat = 0.5 kg * 3400 J/(kg* oC) * 80oC
Heat = 136000 Joules
Heat = 136 kg
Technically there is only 1 place of accuracy.
Which statements best describe the functions of nucleic acids and proteins?.
The statement describing nucleic acid has been that nucleic acid provides the blueprint for the formation of proteins.
Nucleic acid has been the genomic material in the body that performs the function of storage of information. DNA and RNA are nucleic acids.
The proteins are the biomolecules that are composed of amino acid units bound by the polypeptide bond. The information for the correct sequence of binding of protein has resulted from the mRNA codes.
The correct sequence and folding results in the operational protein, that has been able to perform varying functions. The codes for the binding of protein have resulted from the blueprint consisting of nucleic acid.
Thus, nucleic acid performs the function of acting as a blueprint for the formation of proteins.
For more information about proteins, refer to the link:
https://brainly.com/question/2193769
Question 24 of 25
How can one tell if a reaction is a redox reaction?
O A. Elements change phases.
O B. A precipitate is formed.
O C. Spectator ions are present.
O D. Electrons are gained and lost.
Answer:
D. Electrons are gained and lost
Explanation:
When electrons are gain and lost, redox reaction takes place. In redox reaction, reduction and oxidation tales place simultaneously. Therefore, option D is correct.
What is redox reaction ?Redox reactions include a change in the oxidation state of the substrate. When electrons are lost or the oxidation state increases, it is called oxidation; when they are gained or the oxidation state decreases, it is called reduction.
Redox reactions are those in which there is a change in the oxidation number, with both an increase and a drop in number. The reaction called non-redox if this does not take place.
Oxidation and reduction always occur jointly because any loss of electrons by one substance must be followed by a gain of electrons by another. Therefore, oxidation-reduction processes or simply redox reactions are other names for electron-transfer events.
Thus, option D is correct.
To learn more about redox reaction, follow the link;
https://brainly.com/question/13978139
#SPJ2
What state is represented by the sign (s)
liquid
gas
solid
dissolved in water
solid.
liquid is (l)
gas is (g)
dissolved in water is (aq)
how do the prefixes of the –saccharide words relate to the structure of the sugar?
Answer:
The prefixes tell you how many of each there are.
Explanation:
So for this example, mono would mean there is one sugar, di meaning 2 sugars and so on. Hope this helped!
Here is a table:
mono- 1 hexa-6
di-2 hepta- 7
tri- 3 octo- 8
tetra- 4 nona- 9
penta - 5 deca- 10
What are the most important topics for revision in chemistry?
Answer:
structure of atom
states of matter
classification of elements and periodicity in properties
thermody namic
Equilibrium
Redox reacation
A protozoan gains shelter as it lives in the intestine of a termites, helping the termite to be able to digest the wood that it eats. This symbiotic relationship between the termite and protozoan is known as:
Answer:
The ecological relationship between termites and the wood-digesting protozoans that live in their gut is an example of mutualism. Thank you for posting your question here at brainly. I hope the answer will help you.
Which of the following is not an ingredient for photosynthesis?
A. Oxygen
B. Carbon dioxide
C. Light energy
D. Vinegar
Answer:
d
Explanation:
......................
Answer:
D. vinegar
Explanation:
Hope this helps you!!
MARK AS BRAINLIEST!!
Earth’s layers are determined by their physical properties and chemical composition. In the lesson, you learned about each of Earth’s layers, what the layers are made of, and why they are important to the Earth. In the space below, write about how the atmosphere may be classified. Would it be part of the lithosphere, or a separate layer? Explain your answer.
Answer:
The Atmosphere Is a separate layer And Also could be classified as the Closest layer
Explanation:
Reactions cannot occur without a certain minimum amount of energy. What is this minimum amount of energy called?
the activation energy
the activated complex
the kinetic energy of reactants
the potential energy of products
`Carbon Dioxide and Water are the _______ in a chemical reaction. 2. Reactants are also called the starting _______ in a chemical reaction.: Reactants are also called the starting _______ in a chemical reaction. 3. This type of energy comes from the sun: a This type of energy comes from the sun 4. You get this type of energy from food: b You get this type of energy from food 5. The process by which plants use the sun to produce glucose and oxygen.: The process by which plants use the sun to produce glucose and oxygen. 6. The products of photosynthesis: The products of photosynthesis 7. The location of photosynthesis in plant cells: The location of photosynthesis in plant cells 8. Another name for glucose is: Another name for glucose is 9. Energy is provided by this cell organelle during cellular respiration: Energy is provided by this cell organelle during cellular respiration 10. The largest source of energy on earth comes from the: d The largest source of energy on earth comes from the Column B a.Chloroplast b.Ingredients c.Reactants d.Sun e.Radiant energy f.Sugar g.Chemical energy h.Glucose and Oxygen i.Mitochondria j.Photosynthesis
Write the chemical formula for the following ionic compound nickel (III) sulfate 
Answer:
Nickel(III) Sulfate Ni2(SO4)3 Molecular Weight -- EndMemo.
Explanation:
this will explain everything
Arrange the gases from most dense to least dense at a given temperature and pressure.
Most dense
Least dense
Answer Bank
Ar
Ne
CO2
H
C12
Answer:
Arrange them in order of greatest to least Molar Mass to get most dense to least dense at a given temperature and pressure.
Explanation:
"Given Temperature and Pressure" just tells you that those two variables are being held constant. The Ideal Gas Law (PV = nRT) shows that n (the # of moles) and V (the volume) are variable still. To keep pressure constant, we need to increase the volume so that the force per area is the same which would unfortunately lower the density. The only way for a gas to have the greatest density would be to have the least average kinetic energy to keep the pressure constant at a smaller volume. This is because kinetic energy is equal to KE = 1/2 m v^2, where m is mass in kilograms and v is the velocity. IT IS CRUCIAL TO NOTE THAT ACCORDING TO KINETIC MOLECULAR THEORY, ALL GASES HAVE THE SAME AVG. KINETIC ENERGY WHEN AT THE SAME TEMPERATURE. So since the avg. KE is also constant across these answers due to the temp. being constant, our only way to decrease the velocity (the rate at which the particles are moving per second) and in turn the number of collisions (to repeat, a smaller number of collisions is desired because they are equal to the pressure that must maintained at a constant value at the smallest volume possible to achieve highest density possible) is to increase the molar mass. This is also pretty intutive for the other part of the issue: since Density is a broken heart (m/v), a higher molar mass would ensure a smaller pressure (due to decreased velocity) and smaller volume (due to constant pressure). Okay, now order the gases heaviest to lightest in terms of molar mass and you got your answer. Please gimme brainliest if this helped bc it took 15 minutes to type out. Hope this helped you! :D
Density is an intensive property as it does not depend on the quantity of the substances Whereas mass and volume are extensive property. The order of density is carbon dioxide>Neon >argon>carbon-12> hydrogen.
What is density?Density tells about the compactness of the substances, how much dense is the substances in other words. Object that is more denser than water they just sink in the water.
Mathematically,
Density of gas = Molar Mass of the gas ÷volume occupied by the given gases
Density is directly proportional to molar mass of the gases.
Molar mass of argon = 18g/mole
Molar mass of Neon = 20g/mole
Molar mass of carbon dioxide=44.01 g/mol
Molar mass of hydrogen=1g/mol
Molar mass of carbon-12=12g/mol
The order of gases from most dense to least dense at a given temperature and pressure is carbon dioxide>Neon >argon>carbon-12> hydrogen.
Therefore, the order of density is carbon dioxide>Neon >argon>carbon-12> hydrogen.
To know more about density, here:
https://brainly.com/question/16894337
#SPJ2
what are Metals that are less reactive than alkali metals and alkaline-earth metals called
Answer:
The first ionization energies (I1) of the alkaline earth metals are not as low as the alkali metals. The alkaline earth metals are therefore less reactive than the alkali metals (Be and Mg are the least reactive of the alkaline earth metals). Several physical properties of these elements are compared in Table 7.7.
What equation explains the relation between amperes, watts and volts?
I = W-V
I = W+V
I = W/V
I = W*V
Answer:
I = W/V
Explanation:
Comes from the Equation P=I*V where P is Power measured in Watts, I is Current measured in Amps and V is Voltage measured in Volts.
How many neutrons are in K-37?
Answer:
is this physics
pls check your questions and try again
What is the melting point of water ?
what is the freezing point of water?
Answer:
Freezing point: 32°F or 0°C
Boiling point: 212°F or 100°C
how do i find the name of an element
Answer:
The periodic table will say it underneath the symbol.
Explanation:
I don't know how else to describe it but I hope this helps. :)
BEBE
It is believed the major reason for the decline in amphibian species is
a. death through disease
b. changing reproductive habits
mutation
d. climate change
C.
Please select the best answer from the choices provided
Answer:
Climate change is the answer
Explanation:
They have to adapt and if the climate changes they no longer can
Answer:
climate change
Explanation:
edge 2022
The boiling points of different substances are given in the table below. Substance Boiling point (°C) Acetic acid 118. 1 Benzene 80. 2 Chloroform 61. 2 Water 100. 0 Which substance most likely has the strongest intermolecular forces? acetic acid benzene chloroform water.
The compound with the presence of higher inter-molecular forces has been Acetic acid. Thus, option A is correct.
The boiling point has been the temperature, at which the liquid has been started to convert to steam. The boiling has been mediated with the application of the energy to the substance for the breaking of the inter-molecular forces.
The higher the inter-molecular forces in the compound, the higher will be the boiling point of the compound. The higher concentration has also resulted in a higher boiling point.
In the following compounds, acetic acid has the highest boiling point of 118 degrees Celsius. Thus, it has been constituted of the higher inter-molecular forces. Hence, option A is correct.
For more information about boiling point, refer to the link:
https://brainly.com/question/2153588
A student creates a hypothesis about their upcoming experiment. What must the
student do in their experiment with relationship to their hypothesis?
create a law based on the hypothesis
change the experiment to make the hypothesis correct
ignore the hypothesis
make observations to prove or disprove the hypothesis
Answer:
D. make observations to prove or disprove the hypothesis
Explanation:
How many atoms are in 80.45 g of magnesium with explanation
Answer:
There are 1.9926 * 10 ^24 atoms.
Explanation:
M ( Mg ) = 80.45 g
We can find the molar mass of magnesium in the Periodic table:
M ( Mg ) = 24.31 g / mole
n = 80.45 g : 24.31 g/mole = 3.31 moles
N a ( Avogadro`s constant ) = 6.02 * 10 ^23
N = Na * n = 6.02 * 10 ^24 * 3.31 = 19.926 * 10 ^23
what are isotopes and explain why
which of the following is a characteristic of the modern periodic table
Hello! Everyone:) I was just wondering if you can help me with my test.
Points: 99
Answer:
By their properties ;)
Explanation:
[tex]\Large \boxed{\sf by \ their \ properties}[/tex]
Every element has a set of particular characteristics. Each has a unique atomic and mass number because they contain a different ratio of protons and neutrons. The number of protons in an element mirrors the element's atomic number. The mass number equals the sum of the element's protons and neutrons.
According to increasing atomic numbers, chemical elements get organized. Periods and groups are the names of the horizontal rows and vertical columns, respectively. The chemical characteristics of elements within the same group are comparable due to their similar valency and number of outer electrons.
Enter the correct ground-state (or lowest energy) configuration based on the number of electrons: 1s^4 2s^4 2p^12.
Express your answer in complete form in the order of orbital filling as a string without blank space between orbitals.
Answer:
The ground state configuration is the lowest energy, most stable arrangement. An excited state configuration is a higher energy arrangement (it requires energy input to create an excited state). Valence electrons are the electrons utilised for bonding.
or the
FIGURE 5.9 The arrow shows a second way of remembering the order in which sublevels fill. Table 5.2 shows the electron configurations of the elements with atomic numbers 1 through 18.
Element Atomic number Electron configuration
sulfur 16 1s22s22p63s23p4
chlorine 17 1s22s22p63s23p5
argon 18 1s22s22p63s23p6
or the
Two electrons
Two electrons fill the 1s orbital, and the third electron then fills the 2s orbital. Its electron configuration is 1s22s1.
Explanation:
Choose your answer
brainlilest me
CARRY ON LEARNING
WILL GIVE BRANIEST HELP
Which procedures were followed in this lab to decrease experimental error? Check all that apply.
using only two types of seeds, both from the same source
having one student count every sprout in every quadrat
using adjacent plots of land for both groups
increasing the sample size by combining data from multiple groups
repeating the experiment indoors under growth lights
measuring plant height the same way and at the same time for both groups
Answer:
Basically A, C, D, F
Explanation:
Summarizing the answer
Using only two types of seeds, both from the same source.
What are experimental error?Experimental error refers to the uncertainties or mistakes that can occur during scientific experiments, leading to inaccuracies in the results. These errors can arise due to a variety of reasons, such as human error, instrumental error, environmental factors, and methodological issues. The presence of experimental error can make it difficult to draw accurate conclusions from the data obtained during an experiment.
Scientists use various procedures to reduce experimental error and improve the accuracy and reliability of their results. These procedures can include:
using adjacent plots of land for both groupsincreasing the sample size by combining data from multiple groupsmeasuring plant height the same way and at the same time for both groups.Learn more about experimental error, here:
https://brainly.com/question/17038045
#SPJ2
will give brainlist to a person with correct answers for all (please help me)
1. Explain how is LiCl formed?
2. What is a combination/synthesis reaction
3. What is a decomposition reaction?
4. What is a single-replacement reaction?
5. What is a double-replacement reaction?
6. What are the trends in electronegativity within groups and across periods in the periodic table?
7. Which element has the lowest electronegativity value?
8. How does electronegativity determine the type of bond that atoms will form?
9. What type of bond will form between 2 atoms that have a large difference in electronegativity?
10. What type of bond will form between 2 atoms when the difference in electronegativity is 0.5?
11. Which element has the highest electronegativity value?
12. What does it mean that matter cannot be created nor destroyed in a Chemical reaction?
Answer:
1. LiCi is formed by the treatment of lithium carbonate with hydrochloric acid
2. A combination reaction (also known as a synthesis reaction) is a reaction where two or more elements or compounds (reactants) combine to form a single compound (product).
3. Chemical decomposition, or chemical breakdown, is the process or effect of simplifying a single chemical entity into two or more fragments.
4. A single-displacement reaction, also known as single replacement reaction or exchange reaction, is a chemical reaction in which one element is replaced by another in a compound
5. Double replacement reactions have two ionic compounds that are exchanging anions or cations.
6. The most electronegative elements are found on the top right of the periodic table.
7. cesium
8. Electronegativity describes the degree to which an atom attracts electrons in a chemical bond. But the electronegativity of two atoms would determine their bond type.
9. ionic bond
10. polar covalent bond
11. fluorine
12. Matter can change form through physical and chemical changes, but through any of these changes, matter is conserved. The same amount of matter exists before and after the change.
Hope i was able to help!!!
How do i find a ionic formula?
for example Ca2+ & S2-
Example #1 write the chemical formula for Calcium Oxide
Step 1
-Find the Atomic symbol of the metal and non-metal on the periodic table
CaO
Step 2
Find the charges for Calcium and Oxygen
which are Ca 2+ and O 2-
Step 3
Balance out the charges
They are already balanced out
Here´s the chemical formula for Calcium Oxide
CaO
Example 2 write the chemical formula for Aluminum Oxide
Step 1
-Find the Atomic symbol of the metal and non-metal on the periodic table
A
l
O
Step 2
Find the charges for Aluminum and Oxygen
Which are Al 3+ and O 2-
Step 3
Balance out the charges
You need 2 Aluminum and 3 Oxygen to balance the charges
Al 3+ O 2-
Al 3+ O 2-
= 6 + O 2-
= 6-
Step 4
If you need more then one element to balance out the charges you identify that by using subscripts
Heres your chemical formula for Aluminum Oxide
[tex]Al_{2} O_{3}[/tex]
