explain the process of convergence and divergence ! HELPPP

Answers

Answer 1

Answer:

Divergence generally means two things are moving apart while convergence implies that two forces are moving together. ... Divergence indicates that two trends move further away from each other while convergence indicates how they move closer together.

Explanation:


Related Questions

There is a bell at the top of a tower that is 45 m high. The bell weighs 15 kg. The bell has energy. Calculate it.

Answers

Answer:

6621.75J

Explanation:

In this case, the bell is not in motion. So we are going to calculate its potential energy rather than its kinetic energy since kinetic energy is the energy a body possesses in motion.

The formula for the potential energy is m*g*h, meaning the mass * acceleration due to gravity * height. Here the mass, m = 15kg, the acceleration due to gravity = 9.81m/s^2, and the height, h = 45m

Substituting our values, the answer becomes 15 * 9.81 * 45 = 6621.75J. Hope you understood my explanation?

AP Physical problem the wording is really throwing me off and im totally lost on how to do this. I would love some help please and thank you! ​

Answers

Explanation:

a) Here is the free-body diagram. Note that I included the components of the weight mg (shown in dotted arrows) for use in the other parts of the problem.

b) The component of the weight parallel to the plane (shown in the diagram as a dotted arrow along the x-axis) is [tex]mg\sin15[/tex] and it is equal to

[tex]mg\sin15 = (25\:\text{kg})(9.8\:\text{m/s}^2)\sin15 = 63.4\:\text{N}[/tex]

c) Applying Newton's 2nd law to the y-axis, we can write

[tex]y:\;\;\;N - mg\cos15 = 0 \Rightarrow N = mg\cos15[/tex]

[tex]N = (25\:\text{kg})(9.8\:\text{m/s}^2)\cos15 = 236.7\:\text{N}[/tex]

d) The component of the weight mg into the plane is the same as the normal force, hence it's also 236.7 N.

e) To solve for the coefficient of friction, we apply Newton's 2nd law to the x-axis:

[tex]x:\;\;\;mg\sin15 - F_f = 0[/tex]

[tex]\Rightarrow F_f = mg\sin15\;\;(2)[/tex]

where [tex]F_f[/tex] is the frictional force defined as [tex]F_f = \mu N[/tex] so we can use Eqn(1) on Eqn (2) to write

[tex]\mu (mg\cos15) = mg\sin15[/tex]

Solving for [tex]\mu,[/tex] we get

[tex]\mu = \dfrac{\sin15}{\cos15} = \tan15 = 0.27[/tex]

Please respect! Can you answer this for me?

Answers

Answer:

ıf u find the answer can u comment me to notification thank u

Explanation:

How does an emergency action plan benefit your workplace

Answers

Anything can happen at any moment. And if you have a plan for anything it will make things easier for you.

A 0.75 kg model car is moving west at a speed of 9.0 m/s when it collides head-on with a 2.00 kg model truck that is traveling east at a speed of 10.0 m/s. After the collision, the 0.75 kg model car is now moving east at 11 m/s. What is the speed and direction of the model truck after the collision?

Answers

Answer:

  2.5 m/s east

Explanation:

Let east be the positive direction for velocity.

The change in momentum of the 0.75 kg model car is ...

  m1·v2 -m1·v1 = (0.75 kg)(11 m/s) -(0.75 kg)(-9 m/s)

  = (0.75 kg)(20 m/s) = 15 kg·m/s

The change in momentum of the 2.0 kg model car is the opposite of this, so the total change in momentum is zero.

  m2·v2 -m2·v1 = (2 kg)(v2 m/s) -(2 kg)(10 m/s) = 2(v2 -10) kg·m/s

The required relation is ...

  15 kg·m/s = -2(v2 -10) kg·m/s

  -7.5 = v2 -10 . . . . divide by -2

  2.5 = v2 . . . . . . . add 10

The velocity of the model truck after the collision is 2.5 m/s east.

please help 9.2.1 project in science just ned an example​

Answers

Answer:

Give me what kind of example you need please so I can help you. Put it in the comments.

Explanation:

A .223 rifle bullet, traveling at 370.m/s, hits a block of pine wood, and goes in, to a depth of 0.130m. The mass of the bullet is 1.75g (mass = 0.00175kg). Assume a constant slowing force. (A) What is the acceleration that the bullet experiences as it comes to a stop? (B) How much time is required for the bullet to stop? (C) What force, in Newtons, does the wood exert on the bullet?

Answers

Answer:

Explanation:

A)

v² = u² + 2as

a = (v² - u²) / 2s

a = (0² - 370²) / (2(0.130))

a = -526,538 m/s²

B)

t = v/a

t = 370 / 526538

t = 0.0007027... s or 0.7 ms

C)

F = ma

F = 0.00175(526,538) = 921.442307... = 921 N

Answer This!!!!!!
I'll give brainliest to whoever gets it right.

Answers

Answer:

Explanation:

 Gamma can occur at any step in the decay as the remaining protons and neutrons rearrange themselves into their new identity.

Two rocks with different masses fall side by side, pulled downward by gravity. Why are they able to experience the same motion?(1 point)

The rock with more mass will also have more force pulling it down. Even though the accelerations are different, the rocks will have the same speed.
The rock with more mass will also have more force pulling it down. Even though the accelerations are different, the rocks will have the same speed.

The rock with more mass will also have more force pulling it down, so the accelerations can be the same.
The rock with more mass will also have more force pulling it down, so the accelerations can be the same.

Gravity will pull the rocks down equally, so the accelerations can be the same.
Gravity will pull the rocks down equally, so the accelerations can be the same.

Gravity will pull the rocks down equally. Even though the accelerations are different, the rocks will have the same speed.

Answers

Answer:

The rock with more mass will also have more force pulling it down, so the accelerations can be the same.

Explanation:

When a low-pressure gas of hydrogen atoms is placed in a tube and a large voltage is applied to the end of the tube, the atoms will emit electromagnetic radiation and visible light can be observed. If this light passes through a diffraction grating, the resulting spectrum appears as a pattern of four isolated, sharp parallel lines, called spectral lines. Each spectral line corresponds to one specific wavelength that is present in the light emitted by the source. Such a discrete spectrum is referred to as a line spectrum.
What is the wavelength of the line corresponding to n =4 in the Balmer series? Express your answer in nanometers to three significant figures. EVO AV Om ? X (n) = 4.86.10? By the early 19th century, it was found that discrete spectra were produced by every chemical element in its gaseous slale. Even though these spectra were found to share the common feature of appearing as a set of isolated lines, it was observed that each element produces its own unique pattern of lines. This indicated that the light emitted by each element contains a specific set of wavelengths that is characteristic of that element. Submit Previous Answers Request Answer X Incorrect; Try Again; 19 attempts remaining

Answers

Answer:a)   λ = 4.862 10⁻⁷ m,  b)  λ = 4.341 10⁻⁷ m

Explanation:

The spectrum of hydrogen can be described by the expression

         

in the case of the initial state n = 2 this series is the Balmer series

a) Find the wavelength for n = 4

       

let's calculate

          = 1,097 10⁷ ()

         \frac{1}{ \lambda} = 1.097 10⁷ 0.1875 = 0.2056 10⁷

          λ = 4.862 10⁻⁷ m

b) n = 5

           

    \frac{1}{ \lambda} = 1,097 10⁷ ()

    \frac{1}{ \lambda} = 1.097 10⁷ 0.21 = 0.23037 10⁷

     λ = 4.341 10⁻⁷ m

which statement about metals is true?

Answers

All metals are solid at (our) living temperatures except for mercury which is a liquid. Metals are shiny for a while at least when properly finished. Metals are good conductors of both heat and electricity. This is due to the excess electrons in their valence clouds that facilitate energy transfer.What are 5 characteristics of metal?

Metals are lustrous, malleable, ductile, good conductors of heat and electricity

Silver conducts electricity better than any other metal.

Brass is an alloy made from zinc and copper.

Pure gold is too soft for many things so most gold is combined with other metals to make it stronger. ...

World time periods are often listed by the metal used.

yayy here you are f, r, e, e, p, o, i, n, t, s

Answers

Answer:

Albert Einstein Albert Einstein was a German-born theoretical physicist, widely acknowledged to be one of the greatest physicists of all time. Einstein is best known for developing the theory of relativity, but he also made important contributions to the development of the theory of quantum mechanics.

Explanation:

Thank you so much buddy !!

halp me please i will give brainly

Answers

Answer: It should be the 3rd option down!

Explanation:

Answer: C

Explanation:

(0.50kg)(6.0mls)+(1.00kg)(-12.00mls)

Answers

Answer:

-9.0 × 10-6 m3 kg

Explanation:

I'm not sure if that's what you're looking for nor do I know how to explain it.

Help with a b and c.

Answers

Answer:

Explanation:

Edit to add part a

a)  Heating a gas causes the atoms to increase their kinetic energy. With only atmospheric pressure to contain it, the gas will decrease in density by pushing colder gas out of the way. The lid is then sealed to the jar and allowed to cool. The cooling gas, now constrained by the volume of the jar will be forced to lower its pressure to maintain equilibrium. The lower pressure inside the jar will allow the atmospheric pressure outside the jar to "click" the lid indicating a proper seal.

b Before opening there is a much lower pressure inside the jar than outside. The outside pressure keeps the lid constantly in the "clicked" position.

c After the jar is opened, the pressure on either side of the lid is equal and an unbalanced force applied to one side of the lid or the other can cause the lid to "click" or "unclick" depending on the initial position.

1) Answer: Typically when stuff food is sealed in jars, it is sealed while hot. When the jar cools, and the air above the stuff cools, the pressure of the air decreases. ... When the pressure is more than the bottle can hold, it will explode.


2) answer: The button is there to indicate that the jar has remained sealed. If it's down, the vacuum created during the processing has been maintained, and no air has leaked in. If it's up, and you didn't open it, there's no telling what could be growing in there. , food nerd extraordinaire.

3) answer: Those safety buttons are a raised area on the lid. These jars have been sealed under pressure, and when opened, the pressure is released, causing the raised area to raise or lift. This is the same as when foods are canned at home.

Hello! Hope this helps you pass, merry Christmas!

3. A 1500 kg car moving at 30 m/s strikes a 6000 kg van initially at rest. If the car
comes to a complete stop after the collision, what is the final velocity of the van?

Answers

Answer:

7.5m/s

Explanation:

Force= mass × velocity

Energy is conserved, the car and van should have the same overall force.

1500kg × 30m/s= 6000kg × final velocity

Final velocity = 7.5m/s

A 70 kg hunter, standing on frictionless ice, shoots a 42 g bullet horizontally at a speed of 650 m/s . Part A What is the recoil speed of the hunter

Answers

Answer:

Explanation:

momentum is conserved. Initial momentum was zero, so final total momentum must also be zero

0.042(650) + 70v = 0

v = -0.39 m/s

|v| = 0.39 m/s

Your friend's Frisbee has become stuck 19 m above the ground in a tree. You want to dislodge the Frisbee by throwing a rock at it. The Frisbee is stuck pretty tight, so you figure the rock needs to be traveling at least 4.1 m/s when it hits the Frisbee.

If you release the rock 1.8 m above the ground, with what minimum speed must you throw it?

Answers

Answer:

18.36 m/s

Explanation:

We can solve this using conservation of energy. The energy in the system will be conserved since there are no outside forces acting upon it so the potential energy and kinetic energy will be equal. Giving us this formula to start:

1/2mv^2=mgh

m=mass

g=gravity

h=height

v=velocity

We can start by figuring out the total height the rock travels which we can do by subtracting the height of the frisbee by the height the rock started at.

19m-1.8m=17.2m

Now we can plug in our variables to solve for velocity.

First we negate mass since its on both sides and cancels out leaving us with.

1/2v^2=gh

Plug in.

1/2v^2=(9.8)(17.2)

1/2v^2=168.56

v^2=337.12

v=18.36m/s

Explain why the temperature is not changing at X

Answers

Answer:

The temperature is constant at 'X'. No increase or decrease. Would be same answer if there were a 'X' at temperature 'D'.

Slope of graph is zero so no change in the temperature.

What is temperature?

Temperature is a physical quantity that expresses quantitatively the perceptions of hotness and coldness. Temperature is measured with a thermometer.

Given graph of temperature and time, at position x there in no change in temperature with time so temperature is not changing.

Slope of graph is zero so no change in the temperature.

To learn more about temperature refer to the link:

brainly.com/question/11464844

#SPJ2

If you are good at activities that require agility, what are you able to do well?
1.maintain your heart rate in the upper ranges
2.quickly change the direction of your movement
3.hold a difficult position for a long period of time
4.strategize about the best way to win a game

Answers

Answer:

2.quickly change the direction of your movement

Explanation:

During what time period does the balloon drift in a counterclockwise direction?

Answers

Yeh it’s 9am to 10 pm

Name the energy possessed by hot air

Answers

Answer:

geothermal energy

Explanation:

the energy is obtained from the heat within the surface of earth

Answer:

heat energy

Explanation:

A CD has a diameter of 12.0 cm. If the CD is rotating at a constant angular speed of 200 revolutions per minute, then the tangential velocity of a point on the circumference is:

Answers

Hi there!

Converting from angular velocity to tangential velocity can be done by:

v = ωr

v = tangential velocity (m/s)

ω = angular velocity (rad/sec)

r = radius (m)

Convert 12 cm to meters:

100 cm = 1 m

12 cm = 0.12 m

Now, convert rev/min to rad/sec:

[tex]{\frac{200rev}{min}} * \frac{1min}{60s} * \frac{2\pi rad}{1 rev} = 20.94 rad/sec[/tex]

v = 20.94 · 0.12 = 2.51 m/s

A stereo speaker produces a pure "A" tone, with a frequency of 220.0 Hz.

What is the period of the sound wave produced by the speaker?


T=


What is the wavelength water of the same sound wave as it enters some water, where it has a speed of about 1480 m/s?

λwater=


What is the wavelength air of this sound wave as it travels through air with a speed of about 341 m/s?

λair=

Answers

(a) The period of the sound wave is 0.005 s.

(b) The wavelength of the wave when the speed of the wave is 1480 m/s is 6.73 m.

(c) The wavelength of the sound wave as it travels through air is 1.55 m.

The given parameters;

Frequency of the wave, F = 220 Hz

The period of the sound wave is calculated as follows;

[tex]T = \frac{1}{f} \\\\T = \frac{1}{220} \\\\T = 0.005 \ s[/tex]

The wavelength of the wave when the speed of the wave is 1480 m/s is calculated as follows;

[tex]v = f\lambda \\\\\lambda = \frac{v}{f} \\\\\lambda = \frac{1480}{220} \\\\\lambda = 6.73 \ m[/tex]

The wavelength of the sound wave as it travels through air with a speed of about 341 m/s;

[tex]\lambda = \frac{v}{f} \\\\\lambda = \frac{341}{220} \\\\\lambda = 1.55 \ m[/tex]

Learn more about wave equation here: https://brainly.com/question/4692600

If a particle undergoes SHM with amplitude 0.17 mm , what is the total distance it travels in one period

Answers

Answer:

Particle travels 4 * amplitude in one period = .68 mm

Can someone help label these?

Answers

A. reactants
B. subscript
C. coefficient
D. products

13) A mass attached to the free end of a spring executes simple harmonic motion according to the equation y = (0.50 m) sin (18π t) where y is in meters and t is seconds. What is the period of vibration?

Answers

Hi there!

The period is given by:

[tex]T = \frac{2\pi}{w}[/tex]

T = Period (sec)

w = angular frequency (rad/sec)

According to the equation for SHM in terms of position:

y(t) = Asin(ωt + φ)

A = Amplitude (m)

ω = angular frequency (rad/sec)

t = time (sec)

φ = phase angle

In this instance, the angular frequency is given as 18π.

Plug this value into the equation for T:

[tex]T= \frac{2\pi}{18\pi} = \frac{1}{9} = \boxed{0.111 s}[/tex]

If an object accelerates from rest, what will its velocity be after 1.3 s if it has a constant acceleration of 9.1 m/s^2?

Answers

[tex]\text{Given that,}\\\\\text{Initial velocity,} ~v_0 = 0~ \text{m~s}^{-1}\\\\\text{Time, t = 1.3~sec}\\\\\text{Acceleration, a = 9.1 m s}^{-2}\\\\\\\\\text{Velocity,}\\\\v = v_0 +at\\\\\implies v = 0 + 9.1 \times 1.3 = 11.83~~ \text{m~s}^{-1}[/tex]

Check if correct or not:

Directions: Using what you learned about energy describe the energy transfer or transformations for each of the items below.
1. Clapping Your Hands:
Kinetic- sound
2. Dropping Your Pencil:

3. The Toaster:
Electric-Thermal/Heat
4. A Cat Lying in a Sunny Window:
Light-Thermal/heat
5. Lifting a Book Over Your Head:
kinetic-potential
6. The Radio:
Electric-sound

Tell me if correct or not

Answers

Answer:

Looks good to me

Explanation:

#2 should probably be turning potential energy to kinetic.

why is it so important that you take care of your nervous system?

Answers

Answer:

The nervous system handles the stress response, which, if overworked, can eventually lead to diseases ranging from high blood pressure to diabetes.

Explanation:

hope I helped

Other Questions
who here has a business plan WILL GIVE BRAINLIEST which of the following is not an expression? Simplify.8^158^3Enter your answer as a number to a power, using the ^ symbol to indicate exponents. For example, to enter 4253, type it like this: 42^53 PLEASE THIS HAS TAKEN ME AN ENTIRE DAY I HAVE NO IDEA HOW TO DO THIS Find the value of x.950128060 x what is this solid figure? 5. Which is the BEST description of the narrator in the story "Lone Wolf"?a first-person narrator who has the supernatural senses of a werewolfa narrator with a limited point of view who believes that he is really a wolfan omniscient narrator who knows the thoughts and feelings of his teachera second-person narrator who puts the reader into the mind of a wolf Which of the following is true about centered alignment?A. It aligns both sides of a paragraphB. Is relatively readable alignment when the line width is the correct size for the font sizeC. It is the most readable alignmentD. It is the least readable alignment and should be reserved for brief lines of text rather than full paragraphs Ellen Galinsky and Judy David developed a number of guidelines for communicating with children about divorce. Which is NOT one of the guidelines What do u mean by Expert Detective ? Give answer in ur own words . what is the name of the battle that kicked off the american revolution? Write as expression. The sum of 7, a number, and 8. The nuclear family into which a person is born or adopted.-family-nuclear family-family of orientation-family of procreation-extended family-kinship Choose the correct form of the verb: I ____ (plan) to visit him today. Jason left a bin outside in his garden to collect rainwater. He notices that 1 over 5 gallon of water fills 2 over 3 of the bin. Write and solve an equation to find the amount of water that will fill the entire bin. Show your work. Explain your answer in words. The property taxes on a house were $600. What was the tax rate if the house was valued at $100,000? Follow the problem solving and round your answer to the nearest hundredth of a percent, if necessary. f(x) = x2. What is g(x)? Which of the following is an important step in evaluating sources?1) Analyze the format.2) Meet the author.3) Check for accuracy.4) Read online reviews. Which is the BEST description of the role of glucose in the body? Distance between two points (5,5) and (-9, -2)