Answer:
i believe its 91
Explanation:
pls some one help
1 mark question
Answer:
The atomic number of Chlorine(Cl) is 17 and the electronic configuration is 2,8,7 with seven electrons in the valence shell.
Hope that helps. x
Answer:
See below
Explanation:
Chlorine has 17 electrons in it's shell.
(See the attached file to get the idea of what subshell would be filled first).
The accommodations:
s = 2 electrons
p = 6 electrons
d = 10 electrons
f = 14 electrons
Now, the electronic configuration of chlorine:
1s²2s²2p⁶3s²3p⁵
(2+2+6+2+5 = 17 electrons)
[tex]\rule[225]{225}{2}[/tex]
Hope this helped!
~AH1807I need help with stoichiometry
How many molecules are in 10 grams of sulfur hexafluoride (SF6)? Molar Mass: 146.06 g/mol
Answer: 4.123 x 10^22
Explanation:
The first step is to determine how many moles of sulfur hexafluoride (SF6) there are. To do this, you must take the mass of the SF6 (10g) and divide it by the molar mass (146.06).
[tex]10g * \frac{1 mol}{146.06 g}= 0.068465 mol[/tex]
Then you must use Avagadros number to find the number of molecules.
Avagadros number is the number of molecules in 1 mol of a substance, so a simple multiplication will do the trick.
[tex]0.068465mol * \frac{6.022 * 10^{23}}{1mol} = 4.123*10^{22}[/tex]
And that is your answer. There are 4.123 x 10^22 molecules of sulfur hexafluoride in 10g of it.
Use the pictures below to answer these questions: How does Magnesium become an ion? What is the charge of the Magnesium ion?
Answer:
Explanation:
The bottom picture shows a Mg atom. There are two electrons on the outside ring. When Mg reacts with something, these 2 electrons are given away. The top picture records that fact.
What is the volume, in liters, of 1.4 moles of CO2 gas at STP?
Answer:
22.4 L.
Explanation:
the sun`s blank is the layer that emits visible light
Answer: photosphere.
Explanation:
The part of the Sun commonly called its surface is the photosphere. The word photosphere means "light sphere" – which is apt because this is the layer that emits the most visible light. It’s what we see from Earth with our eyes.
how many moles of water in 100 grams
Answer:
There are approximately 5.55 moles
Explanation:
which of the following pairs of molecules can form hydrogen bonds between them? group of answer choices ch3oh and nh3 hcl and hi ch4 and h2o fo2 and ch2o h2 and o2
Answer:
Hydrogen Bond is the force that exists when H is directly connected to F, O, or N. HCl and HI cannot form hydrogen bonds between them. CH3OH and NH3 can form hydrogen bonds between them. CH4 and H2O cannot form hydrogen bonds between them.
Explanation:
What is an example of thermal energy
A) batteries moving a toy
B) riding a bicycle
C) plugging in a tv
D) using an oven to cook
Why does a light bulb turn in When you flip the switch to on?
Explanation:
Flipping a light switch to turn on a light means that the circuit with the light is being closed. When the switch is flipped the opposite way, to turn the light off, the circuit is being opened.
Answer:
You now have an open circuit
Explanation:
The circuit is closed when the switch is flipped the other way to turn off the light.
What mass of aluminum must react with 100 g of copper (ii) phosphate? (10g)
Mole measure the number of elementary entities of a given substance that are present in a given sample. Therefore, 4.42g of aluminum must react with 100 g of copper (ii) phosphate.
What is mole?The SI unit of amount of substance in chemistry is mole. The mole is used to measure the quantity or amount of substance. We know one mole of any element contains 6.022×10²³ atoms which is also called Avogadro number.
Mathematically,
mole =given mass ÷ molar mass
2 Al + 3 Cu[tex]_3[/tex](PO[tex]_4[/tex])[tex]_2[/tex] → Al[tex]_2[/tex] (PO[tex]_4[/tex])[tex]_3[/tex]+ 3 Cu
moles of copper phosphate= 100 g/380.58
=0.26 moles
3 moles of copper sulphate need 2 mole of Al
0.26 moles of copper sulphate need (2/3)×0.26
=0.17moles
mass of Al= 0.17×26
=4.42g
Therefore, 4.42g of aluminum must react with 100 g of copper (ii) phosphate.
To know more about mole, here:
https://brainly.com/question/15209553
#SPJ2
which tool would be best for measuring centimeters
A. Metric ruler
B. Balance scale
C. Meter scale
D. Measuring tape
Answer:
the answer is d
Explanation:
What is the formula for this compound?
2 atoms of aluminum, 3 atoms of sulfur
Answer:
A
Explanation:
2 atoms of aluminum, 3 atoms of sulfur
Aluminum = Al
Sulfer = S
i just took the test
The formula for 2 atoms of Al and 3 atoms of S is Al₂S₃ and is named Aluminium Sulphide.
How are the formulas of the compound formed?Al has atomic no. =13, S has atomic no.=16
So the valencies of the given elements are
Al⁺³ and S⁻² to attain the noble gas configuration.
Al⁺³↘ ↙S⁻³
Al₂S₃
Cross multiply the valancies for the formation of molecular formula.
Hence, the formula is Al₂S₃.
Learn more about chemical formulas.
https://brainly.com/question/11995171
#SPJ2
How many grams of potassium sulphate are formed when 49g of sulphuric acid in solution are neutralised by potassium hydroxide?
Why do different places on Earth have different climates?
Your answer should include 1 paragraph to explain the claim, evidence, and reasoning. Be sure to check your grammar and spelling!
First, the amount of sunlight received at a given latitude is important. At the equator, the sun is high in the sky and thus very intense. As you move away from the equator, the sun does not reach as high of an angle in the sky, and is less intense. Another important effect near the poles is that during the summer, the sun is up all the time, which boosts the total amount of sunlight received in a day, while in contrast, during the winter, no sunlight is received at all.
There is another, more subtle effect that has to do with latitude. Nature likes to have the temperature be the same everywhere, much like ice cream melts at room temperature or a hot cup of coffee cools to room temperature. The equator is getting blasted with intense sunlight, while the poles are getting a lot less. Nature tries to resolve this imbalance and make the atmosphere the same temperature everywhere. The most efficient way to transfer heat towards the poles depends on latitude and the rotation of the Earth in a complex way. In the tropics (within 30 degrees latitude of the equator), the average daily temperature is mostly constant. Whether you move from north to south, say fro the equator to Mexico, the temperature is mostly the same. Compare that to the midlatitudes (30–60 degrees latitude), where the temperature changes rapidly as you move north or south to the poles. For example, the temperature in Texas is a lot hotter than the temperature in North Dakota.
Another factor is the composition of the surface. Different substances absorb, store, and re-emit heat with different levels of efficiency. The ocean is a major factor, which can either warm or cool the adjacent land. Other surface materials like rock, sand, vegetation, and ice also regulate temperature
The elevations of the surface, specifically mountains effect the climate. Usually, the taller the mountain, the colder the temperature is at the top. Mountains also cause air to flow in certain ways around them, which leads to wet areas on the upwind side and dry areas on the downwind side.
please help quickly
Rubia was given a type of inclined plane called a ramp in her science class. Her teacher told her that the ramp should have a mechanical advantage of 3.
Rubia pulled a block up the ramp, but afterward she calculated that the mechanical advantage of the ramp was 2.8 instead of 3. Her teacher said she did not make a mistake. What did Rubia calculate?
A.
the actual operating power of the ramp
B.
the actual mechanical advantage of the ramp
C.
the ideal mechanical advantage of the ramp
D.
the ideal operating power of the ramp
Answer: B. The actual mechanical advantage of the ramp.
Explanation:
The professor saying that the ramp SHOULD have a mechanical advantage of 3 indicates that that would be the ideal mechanical advantage. Since Rubia calculated it to be 2.8, that means that it is the acutal mechanical advantage. The actual advantage will be reduced from the ieal due to things like friction.
What is Jupiter’s strength of gravity?
Write a balanced equation and name the products of the reaction CaCl2+Na3(PO4)
balanced equation - 3CaCl2 + 2Na3PO4 → Ca3(PO4)2 + 6NaCl
products - calcium phosphate and sodium chloride
Answer:
Ca3(PO4)2 + NaCl
Explanation:
calcium phosphate and sodium chloride
I’m in science class right now and I need help on these questions
Answer:
hello
Explanation:
give free 18 points again just answer yes or no
is einstein a scientist? yes or no
Answer:
yes
Explanation:
Answer:
Yes
Explanation:
Albert Einstein is often cited as one of the most influential scientists of the 20th century. His work continues to help astronomers study everything from gravitational waves to Mercury's orbit
Two samples of carbon come into contact. A heat transfer will occur between sample A and sample B. What must be true for heat to transfer from sample A to sample B
Which of the following is the correct way to do it for 3753 Scientific notation
Answer:
b
Explanation:
it is b because it has 4 spots and that would be 3 zeros so it is to the 3rd power
Please help I’ll give brainiest
Based on seismometer data what kind of information can seismologists calculate?
location, quantity, and time of damage created by earthquake
track movements of magma in the Earth's mantle and find out when volcanos will erupt
the distance of the earthquake's epicenter, the location of the epicenter, and when tsunamis will strike coastal areas
time of earthquake, magnitude and velocity, and type of seismic waves
Answer:
Time of earthquake, magnitude and velocity, and type of seismic waves
Explanation:
Seismometers allow us to detect and measure earthquakes by converting vibrations due to seismic waves into electrical signals, which we can then display as seismograms on a computer screen. Seismologists study earthquakes and can use this data to determine where and how big a particular earthquake is.
When 0.019 mol of aluminum sulfate are dissolved in enough water to make 905 milliliters of solution, what is the molar concentration of aluminum ions? Answer in units of M
2. Which substance will form a solution with water? (Select all that app
string
sand
sugar
salt
Answer:
sugar and salt, as they can dissolve in water. Sugar and salt have a high solubility in water. So, sugar and salt can form a solution with water.
Explanation:
Please Help Will Mark Brainliest!!!
Liquid water can be separated into hydrogen gas and oxygen gas through electrolysis. 1 mole of hydrogen gas and 0.5 moles of oxygen gas is produced from 1 mole of liquid water collected in separate 10 L containers at 1 atm. Will the temperatures of the gases be equal? In one to two sentences, use the ideal gas law to explain your answer. (20 points)
Answer:
The ideal gas law specifies the mechanical behavior of ideal gases. It is capable of calculating the volume of gases produced or consumed.
In chemical equations, these equations are widely used to convert between volumes and molar quantities.
Use ideal gas law
Therefore
is the same for both So, = same for both.
When n increases, T decreases, so, n is 1 for and 0.5 for , implying that is hotter.
The temperatures of the gases will not be equal.
The ideal gas law specifies the mechanical behavior of ideal gases. It is capable of calculating the volume of gases produced or consumed. In chemical equations, this equation is widely used to convert between volumes and molar quantities. The ideal gas law states that the pressure, temperature, and volume of gas are related to each other[tex]PV=nRT[/tex]
∵V is the same for both
∴T= same for both.
When n increases, T decreases, so, n is 1 for hydrogen gas and 0.5 for oxygen gas ,implying that oxygen gas will have more temperature than hydrogen gas since its number of moles are lower than hydrogen gas.
Learn more:
brainly.com/question/1063475
1) How many moles of hydrogen gas can be produced if 0.57 moles of hydrochloric
acid, HCl, reacts with excess solid zinc according to the following chemical
equation?
2 HCl + Zn → Hz + ZnCl2
Answer: 0.28 mol H2
Explanation:
0.57mol HCl 1mol H2
2mol Hcl
Hydrochloric acid and zinc show the displacement reaction to produce hydrogen gas and zinc chloride. 0.57 moles of hydrochloric acid and excess zinc react to produce 0.28 mol H₂.
What is a displacement reaction?A displacement reaction is the removal of one of the elements from the reactant with highly active species of the reactivity species to produce the products. It can be a single or double displacement reaction.
The balanced chemical displacement reaction is given as:
2 HCl + Zn → H₂ + ZnCl₂
Here, two hydrochloric acids react with zinc to form one mole of hydrogen gas and one mole of zinc chloride.
Given,
Hydrochloric acid = 0.57 moles
Using proportions to calculate moles as:
If 2 moles of HCl = 1 mole H₂
Then, 0.57 moles = X moles
X = 0.57 ÷ 2
= 0.28 mol H₂
Therefore, 0.57 mole HCl produces 0.28 moles of hydrogen gas.
Learn more about displacement reaction, here:
https://brainly.com/question/13219117
#SPJ2
Students set up a controlled experiment. They put five
crickets in each of three identical containers. They set one
container to 15°C, one to 20°C, and one to 25°C. Then they
count the number of cricket chirps in each container
during 1 hour
What are two constants in this experiment?
Answer:
Here to let the other person have brainliest!!! Enjoy randomer
Explanation:
What are some advantages to the use of hydrokinetic energy? What might be some disadvantages?.
Hydro-kinetic energy has advantages of being a clean, domestic, and renewable source with effective production. The disadvantages have been affected marine environment, along with water quality, and electricity on drought.
Hydro kinetic energy has been the energy produced by the movement of water bodies in the form of tides, waves, and oceanic current. The hydro-kinetic energy has been composed with high energy entrapped in the water bodies.
Some of the advantages of hydro-kinetic energy has been:
It has been a clean energy source and has been pollution free.It has been used as domestic source of energy.It has been a renewable source of energy.It has been produced by the tidal waves, thus can be produced effective and in need.Some of the disadvantages of hydro-kinetic energy has been:
Application of water bodies affects the marine environment.It has been producing low BOD and thereby affects the water quality.Conditions such as drought result in the affected electricity production.For more information about hydro-kinetic energy, refer to the link:
https://brainly.com/question/13120577
Answer:
Some advantages to using hydrokinetic energy are that it can be used without mining materials, it is not associated with waste production, and that it does not contribute to air pollution. The main disadvantage to using hydrokinetic energy is the fact that it uses waves and tides as an energy source. This technology could not be used in all locations.
Explanation:
got it on edge sorry for the late response
Where is the Oort cloud located
A) between the orbit of mars and orbit of Jupiter
B) in the different orbits between the sun and Neptune
C) behind the Kuiper belt at the farthest end of the solar system
D) all over the solar system in between the orbits of the planets
Answer:
If the Oort cloud exists which it most likely does it would be C
Explanation:
