In the graphic, 195 represents the _______.

195 Pt
78

A. Atomic Mass
B. Atomic Number
C. Neutron Number​

Answer:

C. As the temperature increases,the speed of gas molecules increase.

Answer:

It has a total of three elements and seven atoms. Another use that aluminum hydroxide has is it treats the symptoms of too much stomach acid. Some examples of what it treats are: upset stomach, heartburn, and acid indigestion.

Explanation:

Atomicity is the no of atoms present in one molecule. Atomicity of Al(OH)3 = 7.

Answer:

Less than 7 ph value are acidic. Greater than 7 ph value are basic.

Answer:

33.3% (depending on how many significant figures you need)

Explanation:

Actual yield divided by theoretical yield times 100%

Answer:

First we know that the molar mass of CO2 is 44.01g/mol, and that the sample of CO2 contains 3.408 x 10^21 molecules, and we have to find the mass of that sample.

We know that moles = mass/molar mass, if we rearrange the equation for mass, we'll get:

mass = moles x molar mass

Also, note that the number of atoms/molecules in a sample is the moles of the sample x Avogadro's number (6.02 x 10^23)

If we rearrange the equation for moles, we would get:

moles = molecules of sample/6.02 x 10^23

Plug in the values for the equation above to get the moles:

moles = (3.408 x 10^21)/(6.02 x 10^23)

moles = 0.00566112956 (we're not done yet)

Now that we have the moles and we were already provided the molar mass, we can calculate the mass using the very first equation we rearranged.

mass = moles x molar mass

mass = 0.00566112956 x 44.01

mass = 0.2491g (answered 4 places past the decimal point)

Therefore the sample of Carbon Dioxide has a mass of 0.2491g

Answer:

C. 10.540 moles

Explanation:

divide grams by molar mass to get moles

Answer:

Explanation:

Since the moles of gas and temperature are held constant the new volume can be found by using the formula for Boyle's law

[tex]V_2 = \frac{P_1V_1}{P_2} \\[/tex]

where

P1 is the initial pressure

P2 is the final pressure

V1 is the initial volume

V2 is the final volume

From the question

P1 = 1 atm

P2 = 2.25 atm

V1 = 250 mL

We have

[tex]V_2 = \frac{250 \times 1}{2.25} = \frac{250}{2.25} \\ = 111.1111111...[/tex]

We have the final answer as

Hope this helps you

The molarity of aqueous lithium bromide, LiBr solution is 0.2 M

We'll begin by calculating the number of mole of Pb(NO₃)₂ in the solution.

Mole = Molarity x Volume

Mole of Pb(NO₃)₂ = 0.25 × 0.01

Mole of Pb(NO₃)₂ = 0.0025 mole

Next, we shall determine the mole of LiBr required to react with 0.0025 mole of Pb(NO₃)₂

Pb(NO₃)₂ + 2LiBr —> PbBr₂ + 2LiNO₃

From the balanced equation above,

1 mole of Pb(NO₃)₂ reacted with 2 mole of LiBr.

Therefore,

0.0025 mole of Pb(NO₃)₂ will react with = 2 × 0.0025 = 0.005 mole of LiBr

Finally, we shall determine the molarity of the LiBr solution

Molarity = mole / Volume

Molarity of LiBr = 0.005 / 0.025

Molarity of LiBr = 0.2 M

Learn more about molarity: https://brainly.com/question/10103895

Answer:

1) Combustion

2)Synthesis

3)Single Replacement

4)Decomposition

5)Double Replacement

6)Synthesis

7)Double Replacement

8)Single Replacement

9)Combustion

10)Decomposition

Explanation:

Remeber, decomposisition is breaking things apart, synthesis is building them, cobusion will always make water and CO2 and will always burn O2, single replacemnt will have 1 thing replaced (single) and double replacement will have 2 things replaced (double).

Hope this helps!

Answer: To answer your question of what is true of a lewis base, it is true that a lewis base donates electron pairs.

Explanation: A Lewis base is any substance, such as the OH- ion, that can donate a pair of nonbonding electrons. A Lewis base is therefore an electron-pair donor.

Answer:

u should go to gathmath

Explanation:

it's alot better

B. At-200

In beta decay the atomic number increases by 1

Answer:

All the individuals of a species living within a specific area are collectively called a population.

Explanation:

Answer:

Dinitrogen pentoxide also known as Nitrogen pentoxide or nitric anhydride (these are all the same thing just different names people call them)

Answer:

Molecules don’t have to collide with each other in order to experience intermolecular forces.

Molecules with permanent dipoles, held in fixed orientation, such as water molecules in the solid state (ice), interact with a potential proportional to the inverse cube of distance. This intermolecular force always exists, no matter how far apart the molecules are; every water molecule interacts with every other water molecule. However, because it diminishes rapidly with distance, it tends to only be important at short distances. (In contrast, the potential between two ions goes as 1/r, and that between an ion and a dipole goes as 1/r^2.)

The van der Waals forces, of which London dispersion forces are the most important, are described by a potential proportional to the inverse sixth power of distance. Theoretically, those forces are always operating between any two atoms or molecules, but again, only become important at short distances.

Explanation:

hope this helps

Mass number is the sum of the total number of nucleons (neutrons + protons) present in the atom.

Mass number = Protons + Neutrons

Mass number = 6 + 8

Mass number = 14

_______

Hope it helps ⚜

P2 is 3.5 for p4= 2p2 i.e 2*3.5=7

Answer;561gp203 are required to

produce 10.2 mol H3p03

Answer: 1. Dependent, Independent The dependent variable responds to the independent variable and goes on the Y-axis.

Explanation: The independent variable is controlled or manipulated by the experimenter. For example, someone's age might be an independent variable. Other factors (such as what they eat, how much they go to school, how much television they watch) aren't going to change a person's age.The dependent variable is what you are measuring. For example, a test score could be a dependent variable because it could change depending on several factors such as how much you studied, how much sleep you got the night before you took the test, or even how hungry you were when you took it.

How that helps. :)

The dependent variable responds to the independent variable and goes on the Y-axis. Therefore, option A is correct.

In mathematical modeling, statistical modeling, and experimental sciences, there are dependent and independent variables. Dependent variables are so-called because, during an experiment, their values are examined on the assumption or presumption that they are governed by the values of other variables.

the dependent variable on other measurable variables As a result of an experimental manipulation of the independent variable or variables, these variables should change.

What you track in the experiment and what is impacted by it are both considered dependent variables. The independent variable affects the dependent variable's behavior. Because it "depends" on the independent variable, it is known as a dependent variable.

Thus, option A is correct.

To learn more about the dependent variable, follow the link;

https://brainly.com/question/1479694

#SPJ2

Answer:

An earthquake's what happens when two blocks of the earth suddenly slip past one another.

located directly above its The epic Center

Explanation:

Answer:

corbonization for dictionnal

Explanation:

correct

Answer:

neutralization reaction forms water and salt , neutralization is the reaction!

Explanation:

Answer:

H2So4 + Na2Co3 -> H20 + Na2So4 + CO2

The chemical formulas for the salt and other compound that are formed in the reaction are Na₂SO₄,H₂O and CO₂.

Chemical  formula is a way of representing the number of atoms present in a compound or molecule.It is written with the help of symbols  of elements. It also makes use of brackets and subscripts.

Subscripts are used to denote number of atoms of each element and brackets indicate presence of group of atoms. Chemical formula does not contain words. Chemical formula in the simplest form  is called empirical formula.

It is not the same as structural formula and does not have any information regarding structure.It does not provide any information regarding structure of molecule as obtained in structural formula.

There are four types of chemical formula:

1)empirical formula

2) structural formula

3)condensed formula

4)molecular formula

Learn more about chemical formula,here:

https://brainly.com/question/29031056

#SPJ5

Answer:

In oxidation reduction reactions, one species gets reduced by taking on electron(s) and another species gets oxidized by losing electrons. They also flow by a wire

Explanation:

Answer:

In the final solution, the concentration of sucrose is 0.126 M

Explanation:

The number of moles of solute in the volume taken from the more concentrated solution will be equal to the number of moles of solute in the diluted solution. Then, the concentration of the first solution can be calculated using the following equation:

Ci · Vi = Cf · Vf

Where:

Ci = concentration of the original solution

Vi = volume of the solution taken to prepare the more diluted solution.

Cf = concentration of the more diluted solution.

Vf = volume of the more diluted solution.

For the first dillution:

26.6 ml · 2.50 M = 50.0 ml · Cf

Cf = 26.6 ml · 2.50 M / 50.0 ml

Cf = 1.33 M

For the second dilution:

16.0 ml · 1.33 M = 45.0 ml · Cf

Cf = 16.0 ml · 1.33 M / 45.0 ml

Cf = 0.473 M

For the third dilution:

20.0 ml · 0.473 M = 75.0 ml · Cf

Cf = 20.0 ml · 0.473 M / 75.0 ml

Cf = 0.126 M

In the final solution, the concentration of sucrose is 0.126 M

hope that help

hope you have a great Christmas

mark me brinilylist

Answer:

carbon monoxide can be formed due to incomplete combustion of carbon due to insufficient oxygen supply

2C+O2___2CO

Si+O2____SiO2

Answer:

About 57.60 mL.

Explanation:

We can utilize the dilution equation:

[tex]\displaystyle M_1V_1 = M_2V_2[/tex]

Where M are the molarities of the solutions and V are the volumes of the solutions.

We want to determine the volume of a 2.903 M NaOH solution to mix in order to produce 500.0 mL of a 0.3344 M solution.

Substitute and solve for V₁:

[tex]\displaystyle \begin{aligned} (2.903 \text{ M})V_1 & = (0.3344 \text{ M})(500.0 \text{ mL}) \\ \\ V_1 & = 57.60\text{ mL} \end{aligned}[/tex]

In conclusion, 57.60 mL of a 2.903 M NaOH solution is needed.

Answer:

1. A model’s usefulness depends on the accuracy of its predictions.

2. Daniel Bernoulli

3. molecule

4. It took several hundred years for scientists to develop current theories, and they are still being revised to this day.

5.  Consistent results support the validity of the model, while inconsistent results indicate the need to modify the model.

Explanation:

The discovery that macroscopic and microscopic phenomena are connected took several hundred years.

A model is a representation of a real life system that serves as a tool for predictions and explanation. Since models serve a predictive purpose, a model’s usefulness depends on the accuracy of its predictions.

The pressure of a gas is caused by the collision of gas molecules with the walls of the container. This was established by the scientist called Daniel Bernoulli.

Avogadro was able to create the term molecule to describe a substance that has independent existence. The discovery that macroscopic and microscopic phenomena are connected took several hundred years. It took several hundred years for scientists to develop current theories, and they are still being revised to this day.

The  results of experiments investigating the relationship between microscopic and macroscopic phenomena affect a model of molecular theory in the sense that consistent results support the validity of the model, while inconsistent results indicate the need to modify the model.

Learn more: https://brainly.com/question/2289444