oxidation number of Ni in Ni(CO)4 is​

Answer:

Electro positivity increases down the group

N₂ + 3H₂ ⇄ 2NH₃ + heat

In the given equilibrium, we notice that the heat is on the right. which means that if the heat requirements don't meet, the reactants on the right will no longer react due to the lack of heat

but because the reactants on the left don't have such weaknesses, they will keep reacting hence producing more and more ammonia until a new equilibrium is reached

where there will be more ammonia and less nitrogen and hydrogen as compared to the equilibrium we had initially

Answer:

Explanation:

heat is given out as 1 of the products, along w/ NH3 in the forward reaction. so its an exothermic reaction

decreasing temperature favors exothermic reaction as more heat can be absorbed by the environment

so equilibrium will shift towards the products

The equilibrium constant K₁ = Equilbrium constant K₂.

The equilibrium constant, K, of a reaction, is defined as:

"The ratio between concentration of products powered to their reaction quotient and concentration of reactants powered to thier reaction quotient".

For the reaction:

aA + bB ⇄ cC + dD

The equilibrium constant, K, is:

[tex]K = \frac{[C]^c[D]^d}{[A]^a[B]^b}[/tex]

Now, assuming the reaction of the problem is 1:1:

A + B ⇄ C + D

[tex]K = \frac{[C][D]}{[A][B]}[/tex]

The concentrations of the reactants are directly proportional to the volume added. Thus, we can assume that concentration = Volume. Replacing for K₁ and K₂:

[tex]K_1 = \frac{[C][D]}{[10mL][10mL]} = K_1 = \frac{[C][D]}{100mL^2}[/tex]

In the same way:

[tex]K_2 = \frac{[C][D]}{[1mL][100mL]} = K_2 = \frac{[C][D]}{100mL^2}[/tex]

Thus, we can say:

Learn more about chemical equilibrium in:

https://brainly.com/question/4289021?referrer=searchResults

Answer:

nucleus is a collection of particles called protons,which are positively charged..and neutrons which are electrically neutral..electrons which are negatively charged..and neutrons are in turn made up of particles called quarks ..

Explanation:

hope this helps u ...

Answer:

The Nucleus is made up of protons and neutrons.

Answer:

In 36 minutes, 100 grams of Chemical C is formed.

Explanation:

Combination of chemicals A and B = chemical C

Chemical A available = 100 grams

Chemical B available = 50 grams

Proportion of A mixed with C = A2

Proportion of B mixed with C = B1

Therefore, Chemical C = A2 + B1

If 25 grams of C is formed in 9 minutes

In one minute 25/9 grams of C will be formed

Therefore, in 36 minutes, 25/9 * 36 = 100 grams

Answer:

the metal become red hot

Answer:

2Ag(s) + 2H²S(g) + O2(g) ➡️ Ag2S(s) + 2H2O(g)

Explanation:

Sorry for my typo. but you understand

Answer:

cis

Explanation:

Cis isomers are formed when the substituents on the carbons of the double bond are on the same side of the double bond, forming a U. Trans isomers have substituents on opposite sides of the double bond, forming a sideways Z.

Answer:

a. It turns color in the presence of an enzyme that us bound to the secondary antibody.

Explanation:

The compound chloronapthenel is used in the reaction because it changes the color in the presence of an enzyme. It is strong organic compound which is used in biochemical processes.

Answer:

N2 but i really didn't know

The compound that would be expected to be an electrolyte is : ( A ) N₂

An electrolyte is any subsatnce which conducts electircity when dissolved in a solvent such as water. From the question the compound that can conduct electricty when dissolved in water is N₂

Hence we can conclude that The compound that would be expected to be an electrolyte is : ( A ) N₂

Learn more about electrolyte : https://brainly.com/question/14308411

#SPJ2

Answer:

Line graphs are used to track changes over short and long periods of time. When smaller changes exist, line graphs are better to use than bar graphs. Line graphs can also be used to compare changes over the same period of time for more than one group.

Answer:

[tex]r=215pm[/tex]

[tex]N_{Mn}=20[/tex]

Explanation:

From the question we are told that:

Edge length of the unit cell [tex]l=608pm[/tex]

a)

Generally the equation for The relationship between edge length and radius is mathematically given by

[tex]4r=\sqrt{2a}[/tex]

Therefore

[tex]4r=\sqrt{2*608}[/tex]

[tex]r=\frac{\sqrt{2*608}}{4}[/tex]

[tex]r=215pm[/tex]

b)

From the question we are told that:

Density [tex]\rho=7.297[/tex]

Edge length of [tex]l=630.0 pm=>630*10^-{10}[/tex]

Therefore Volume  is given as

[tex]V=l^3[/tex]

[tex]V=630*10^-{10}^3[/tex]

[tex]V=2.50047*10^{−22}[/tex]

Generally the equation for Mass is mathematically given by

[tex]m=Volume*density[/tex]

[tex]m=V*\rho[/tex]

[tex]m=2.50047*10^{−22}*7.297[/tex]

[tex]m=1.83*10^{-21}g[/tex]

Therefore Molarity is given as

[tex]n=\frac{M}{Molar M}[/tex]

[tex]n=\frac{1.83*10^{-21}g}{55}[/tex]

[tex]n=3.32*10^{-23}[/tex]

Finally The atoms in a unit cell is

[tex]N_{Mn}=Moles*Avogadro\ constant[/tex]

[tex]N_{Mn}=3.32*10^{-23}*6.023*10^{23}[/tex]

[tex]N_{Mn}=20[/tex]

Answer:

dissolution is the process

Answer:

When ionic compounds dissolve, they break apart into ions which are then able to conduct a current ( conductivity ). ... Many molecular compounds, such as sugar or ethanol, are nonelectrolytes. When these compounds dissolve in water, they do not produce ions.

Explanation:

Ethanol is an organic compound with an alcoholic functional group and is nonelectrolytes. Ethanol (CH₃CH₂OH) does not form ions in an aqueous solution. Thus, option B is correct.

Nonelectrolytes are substances that do not dissociate readily to yield ions and also are poor conductors of electricity and heat due to a lack of charged ions.

Ethanol is a nonelectrolyte that does not show conductivity and can be dissolved in water without producing ions. They cannot forms ions upon dissociation as covalent bonds are present.

Instead of ions that have covalent compounds that lack the ability to transfer the electron to conduct the electrical charge. Glucose, ethanol, etc. are some examples of a nonelectrolyte.

Therefore, option B. ethanol does not form ions is the correct blank.

Learn more about nonelectrolytes here:

https://brainly.com/question/14633704

#SPJ2

Answer:

A

Explanation:

it increase the rate of reaction when necessary

The chemical change that is  responsible for producing the heat that maintains the temperature of your body is metabolism.

Chemical changes are defined as changes which occur when a substance combines with another substance to form a new substance.Alternatively, when a substance breaks down or decomposes to give new substances it is also considered to be a chemical change.

There are several characteristics of chemical changes like change in color, change in state , change in odor and change in composition . During chemical change there is also formation of precipitate an insoluble mass of substance or even evolution of gases.

There are three types of chemical changes:

1) inorganic changes

2)organic changes

3) biochemical changes

During chemical changes atoms are rearranged and changes are accompanied by an energy change as new substances are formed.

Learn more about chemical changes,here:

https://brainly.com/question/23693316

#SPJ7

The question is incomplete. The complete question is :

Hydrogen [tex](H_2)[/tex] gas and oxygen [tex](O_2)[/tex] gas react to form water vapor [tex](H_2O)[/tex]. Suppose you have 11.0 mol of [tex]H_2[/tex] and 13.0 mol of [tex]O_2[/tex] in a reactor. Calculate the largest amount of [tex]H_2O[/tex] that could be produced. Round your answer to the nearest 0.1 mol .

Solution :

The balanced reaction for reaction is :

[tex]$2H_2(g) \ \ \ \ + \ \ \ \ \ O_2(g)\ \ \ \rightarrow \ \ \ \ 2H_2O(g)$[/tex]

11.0                      13.0

11/2                       13/1     (dividing by the co-efficient)

6.5 mol               13 mol    (minimum is limiting reagent as it is completely consumed during the reaction)

Therefore, [tex]H_2[/tex] is limiting reagent. It's stoichiometry decides the product formation amount from equation above it is clear that number of moles for [tex]H_2O[/tex] will be produced = number of moles of [tex]H_2[/tex]

                                     = 11.0 mol

Answer:

O2 is limiting reactant

Explanation:

To find the limiting reactant we need to convert the mass of each reactant to the moles using the formula weight. And, as 1 mole of C6H12O6 reacts with 6 moles of O2, we can know wich reactant will be over first (Limiting reactant) as follows:

Moles C6H12O6:

650g * (1mol/180.16g) = 3.608 moles C6H12O6

Moles O2:

650g * (1mol/32g) = 20.31 moles O2

Now, for a complete reaction of 3.608 moles of C6H12O6 are required:

3.608 moles C6H12O6 * (6mol O2 / 1mol C6H12O6) = 21.65 moles O2

As there are just 20.31 moles of O2,

Answer:

Cs> Ba> Pb>Si> P>O

Explanation:

Recall that atomic size decreases across a period and increases down the group.

As we move from Cs to Ba, the atomic size decreases across the period. Lead is larger than silicon since atomic size increases down the group.

Between phosphorus and oxygen, phosphorus is larger than oxygen as you move across the period.

Answer:

The rate constant of an SN1 reaction depends on the nucleophile

The rate constant of an SN2 reaction does not depend on the nucleophile

Explanation:

Let us recall that in an SN1 reaction, the rate determining step involves only the alkyl halide substrate and not the nucleophile. Hence;

Rate = k[RX]

Therefore;

k= Rate/[RX]

For an SN2 reaction, the rate determining step involves both the nucleophile and the alkyl halide substrate.

Hence;

Rate = k[Nu-] [RX]

k= Rate/[Nu-] [RX]

Note that;

[Nu-] = concentration of the nucleophile

[RX] =concentration of alkyl halide substrate

k= rate constant

We can see from the above derivations that;

1) The rate constant of an SN1 reaction does not depend on the nucleophile

2) The rate constant of an SN2 reaction depends on the nucleophile

Answer:

The energy required to break a covalent bond

Explanation:

When a chemical bond is formed, energy is released. When a chemical bond is broken, energy is absorbed.

We define the bond dissociation energy as the energy required to break a covalent bond. The process of covalent bond cleavage is endothermic hence energy is absorbed for the process to occur.

Explanation:

Lanthanide series= E4

Boron=Si

Chalogen=O

Alkaline Earth metal =M9

In this equilibrium, the chemical system will shift to the right in order to produce more NH₃.

The equilibrium constant of a reaction is defined as:

"The ratio between equilibrium concentrations of products powered to their reaction quotient and  equilibrium concentration of reactants powered to thier reaction quotient".

The reaction quotient, Q, has the same algebraic expressions but use the actual concentrations of reactants.

To solve this question we need this additional information:

For this reaction, K = 6.0x10⁻² and the initial concentrations of the reactants are:

[N₂] = 4.0M; [NH₃] = 1.0x10⁻⁴M and [H₂] = 1.0x10⁻²M

Thus, for the reaction:

N₂ + 3H₂ ⇄ 2NH₃

The equilibrium constant, K, of this reaction, is defined as:

[tex]K = \frac{[NH_3]^2}{[H_2]^3[N_2]}[/tex]

Where [] are concentrations in equilibrium.

And Q, is:

[tex]Q = \frac{[NH_3]^2}{[H_2]^3[N_2]}[/tex]

Where actual concentrations are:

[NH₃] = 1.0x10⁻⁴M

[N₂] = 4.0M

[H₂] = 2.5x10⁻¹M

Replacing:

Q = 1.6x10⁻⁷

As Q < K,

The chemical system will shift to the right in order to produce more NH₃

Learn more about chemical equililbrium in:

https://brainly.com/question/24301138

Answer:

a. True

Explanation:

An atom can be defined as the smallest unit comprising of matter that forms all chemical elements. Thus, atoms are basically the building blocks of matters and as such determines or defines the structure of a chemical element.

Generally, atoms are typically made up of three distinct particles and these are protons, neutrons and electrons.

A chemical reaction can be defined as a chemical process which typically involves the transformation or rearrangement of the atomic, ionic or molecular structure of an element through the breakdown and formation of chemical bonds to produce a new compound or substance.

Hydrogen is the simplest chemical element that exists. The symbol for the chemical element hydrogen is "H" and it is a colourless, tasteless, odorless, and highly flammable gas.

It is a chemical element found in group (1) of the periodic table and as such it has one (1) electron in its outermost shell. Thus, hydrogen has an atomic number of one (1) and a single valence electron because it has only one (1) proton and one (1) electron in its nucleus.

In Stoichiometry, two hydrogen atoms interact to form a hydrogen molecule, with each atom having a single electron in the 1S orbital. These hydrogen atoms react with each other due to the presence of a balanced attractive and repulsive force, which produces a strong covalent bond (H-H) in the hydrogen molecule.

Energy is released in the form of heat when the electrons in the orbitals of the two (2) hydrogen atoms form a covalent bond (H-H); thus, it's an exothermic chemical reaction.

Answer:

NaCN- basic salt

KNO3 - neutral salt

NH4Cl - acid salt

NaHCO3 - acid salt

Na3PO4 - acid salt

Explanation:

Salt hydrolysis a process by which salts react with water giving an acid and a base.

When we dissolve NaCN in water, we have;

NaCN + - ⇄ Na^+ + CN^-

KNO3 ------> K^+ + NO3^-

NH4Cl ------> NH4^+ + Cl^-

NaHCO3 -----> Na^+ + HCO3^-

Na3PO4 ----> 3Na^+ + PO4^3-

Note that if a salt is formed from a weak acid and a strong base, the salt will be a basic salt e.g NaCN formed from weak HCN and strong NaOH.

If a salt is formed from a strong acid and weak base, the salt will be acidic, e.gNH4Cl formed from weak NH3 and strong HCl.

If a salt is formed from a strong acid and strong base, the salt will be neutral, e.g KNO3 formed from strong KOH and strong HNO3.

Answer:

a. 9.2

b. 4.4

c. 6.3

Explanation:

In order to calculate the pH of each solution, we will use the definition of pH.

pH = -log [H⁺]

(a) [H⁺] = 5.4 × 10⁻¹⁰ M

pH = -log [H⁺] = -log 5.4 × 10⁻¹⁰ = 9.2

Since pH > 7, the solution is basic.

(b) [H⁺] = 4.3 × 10⁻⁵ M

pH = -log [H⁺] = -log 4.3 × 10⁻⁵ = 4.4

Since pH < 7, the solution is acid.

(c) [H⁺] = 5.4 × 10⁻⁷ M

pH = -log [H⁺] = -log 5.4 × 10⁻⁷ = 6.3

Since pH < 7, the solution is acid.

Answer:

6.63 M

Explanation:

NaCl(s) ---> Na^+(aq) + Cl^-(aq)

Given that [Na^+] = [Cl^-] = s

Where s= concentration of the both ions

Ksp = s^2

s= √Ksp

s= √43.9

s= 6.63 M

The concentration of Na (in M) obtained when it begins to crystallize out of solution is 6.63 M

The solubility of product (Ksp) is defined as the concentration of products raised to their coefficient coefficients. This is illustrated below:

mX <=> nY + eZ

Ksp = [Y]^n × [Z]^e

NaCl(aq) → Na⁺(aq) + Cl¯(aq)

Ksp = [Na⁺] × [Cl¯]

43.9 =  y × y

43.9 = y²

Take the square root of both side

y = √43.9

y = 6.63 M

Thus, the concentration of Na⁺ is 6.63 M

Learn more about solubility of product:

https://brainly.com/question/4530083

it's helpful

you can try this answer

Answer:

0.012 moles of electrons were transferred

Explanation:

We can find the number of electrons transferred from the time in seconds and the current in Amperes using the equation:

n = I*t / F

Where n are moles of electrons transferred

I is current in Amperes = 0.2053A

t is time in seconds:

94.3min*(60s/1min) = 5658s

F is faraday constant 96485A*s/mol

Replacing:

n = 0.2053A*5658s / 96485A*s/mol

n = 0.012 moles of electrons were transferred

Moles are the mass per unit molar mass of compound. The number of moles of electrons that are transferred is 0.012 moles.

An electrolytic cell is a type of electrochemical cell that uses electrical energy from external sources to conduct the chemical energy in a cell.  

The moles transferred in electrolytic cells are measured as:

[tex]\rm n = \rm \dfrac{I\times t}{F}[/tex]

Given,

Current (I) in amperes = 0.2053 A

Time (t) in seconds = 5658 sec

Faraday constant (F) = 96485 A -s/mol

Substituting values in the equation above moles (n) can be calculated as:

[tex]\begin{aligned} \rm n &= \dfrac{ 0.2053 \times 5658 }{96485}\\\\&= 0.012 \;\rm mol\end{aligned}[/tex]

Therefore, 0.012 moles are transferred in this process.

Learn more about electrolytic cells here:

https://brainly.com/question/22514717