Please help!! :)

For this circuit, what will be the voltage drop across R1?

A. 21.3 V

B. 14.2 V

C. 45.0 V

D. 9.47 V

Explanation:

In the first law, an object will not change its motion unless a force acts on it. In the second law, the force on an object is equal to its mass times its acceleration. In the third law, when two objects interact, they apply forces to each other of equal magnitude and opposite direction.6 days ago

Newton first law state that anything in motion or on rest will continue to do so until an external force is applied on it

Newton 3rd law stare that every action have equal and opposite reaction

Answer:

Explanation:

There is no pressure of your feet on the scales, and no pressure of the floor on the scales, so the scales will read zero*. Hence, your weight, in a freely falling lift is zero

Answer:

nước sôi: 440/17 l

nước 15°C:1260/17 l

Answer:

The result of pressure within a confined aquifer that creates a potentiometric surface

Explanation:

There are conditions under the Earth's surface, where porous rock layers are tilted and also have a confining, less porous, rock layer about the their boundary, forming a confined aquifer. The existing pressure in the aquifer is therefore confined within the water and the porous  rock layer, such that drilling into the pressurized aquifer leads to the water rising under the pressure existing in the aquifer, to a potentiometric surface which is above the actual underground level of the aquifer

Answer:

The acceleration will decrease/reduce

Explanation:

Newton in his second law of motion states that the acceleration of an object is dependent on the force and mass applied on the object. Using the equation as follows:

F = m × a

Where;

F = force (N)

m = mass (kg)

a = acceleration (m/s²)

Acceleration (a) is directly proportional to the force (F) applied but inversely proportional to the mass (m).

According to this question, a friend drops 50 pounds of dog food into a cart being pushed with speed. This means that the mass/weight of the cart was increased. Since the acceleration is inversely proportional to the mass of an object, this means that the acceleration of the cart will DECREASE/REDUCE as the mass increases.

Answer:

Ask with your Science teacher

Explanation:

i do not know the ans

Answer:

I R 2

Explanat

Answer:

C. Positively charged

Explanation:

The plum pudding model of the atom proposes by J. J. Thomson consisted of electrons which lay embedded as the raisins within a dough or soup that was positively charged. The electron was discovered by J. J. Thomson in 1897 through cathode ray tube experiments.

Based on the plum pudding model, if all the negatively charge electrons contained in an atom are removed, the material remaining will be the positively charged soup

Assuming the applied force is exerted parallel to the floor, by Newton's second law both the net vertical and net horizontal forces would be zero:

∑ F (horizontal) = p - f = 0 … … … because the desk is pushed at a constant speed

∑ F (vertical) = n - mg = 0 … … … because the desk doesn't move up or down

where p is the magnitude of the applied force, f is the mag. of kinetic friction, n is the mag. of the normal force due to contact between the floor and desk, and mg is the weight of the desk. We have

n = mg = (100 kg) g = 980 N

and the mag. of friction is proportional to n according to

f = 0.4 n = 392 N

Then the applied force p has magnitude

p = f = 392 N

The answer is definitely Potassium

Answer:

Well okay do it what's your question ?

Answer:

yes

Explanation:

Answer:

Standard units are the units we usually use to measure the weight, length or capacity of objects.

Answer:

THE SYSTEM OF UNITS WHICH IS AGREED BY THE INTERNATIONAL CONVENTION OF SCIENTISTS HELD IN FRANCE IN 1960 IS CALLED SI SYSTEM.

Answer:

Velocity ratio = distance travelled by effort / distance travelled by load. Which is equal to effort arm / load arm. When velocity ratio (VR) is 4, the effort arm is greater than load arm.

Answer:

Explanation:

Force is defined as the push or pull which changes or tries to change the position, state of motion and the shape of the object.

(A) The examples of push are:

To push a chair on the floor, to push the car when it is stopped due to some problem, to push book on the table.

The examples of pull are :

To pull a chair towards you, to pull a string in a game of top, to pull the string in a gym.

(B) To push a chair or a book, the force required is small as compared to the to push a car.

To pull a chair or the string of top is less than the force to pull the string in gym.

All the paper clips, coiled wire with nail and wrapping or coiling the wire more times are the correct answers.

All the paper clips will the wire wrapped around the nail just a few times pick up. A coiled wire with nail in the center is the electromagnet design which is most successful in picking up the most paper clips. Wrapping or coiling the wire more times around the nail make the electromagnet more stronger.

If an iron nail that was much thicker was used, it will make the magnet stronger that leads to strong electromagnetism. There are three main parts that is necessary for making a motor i.e. a rotor, a stator and a commutator.

These three parts use the attractive and repulsive forces of electromagnetism, causing the motor to spin continually as long as it receives a steady flow of electric current. Motors comprise of loops of wire in a magnetic field.

When current is passed through the loops, the magnetic field exerts a torque on the loops, which rotates the shaft that leads to the generation of electricity. Water pump, mixer and washing machine are three appliances in your house that use a motor that turns electrical energy into mechanical energy.

https://brainly.com/question/24278437

Answer:

658.2 nm

Explanation:

Since the galaxy is moving at relavitistic speed, we use the equation for relativistic Doppler shift of light.

So, the wavelength of light observed on the Earth is λ

λ = λ'([tex]\sqrt{\frac{ 1 + \frac{v}{c} }{1 - \frac{v}{c} } }[/tex])

where  λ' = wavelength of light emitted by galaxy = 656 nm, v = speed of galaxy = 1000 km/s (positive since the galaxy is moving away from the Earth) and c = speed of light = 300000 km/s

So, substituting the values of the variables into the equation, we have

λ = λ'(√[{1 + (v/c)}/(1 - (v/c)]

λ = 656 nm(√[{1 + (1000 km/s/300000 km/s)}/(1 - (1000 km/s/300000 km/s)]

λ = 656 nm(√[{1 + 1/300}/(1 - 1/300]

λ = 656 nm(√[{(300 + 1)/300}/{(300 - 1)/300}]

λ = 656 nm(√[{(301)/300}/{(299)/300}]

λ = 656 nm(√[301/299])

λ = 656 nm(√1.0067)

λ = 656 nm × 1.0033

λ = 658.19 nm

λ ≅ 658.2 nm

So, the wavelength observed on Earth is 658.2 nm

Answer:

The angular velocity after the children jump off is approximately 1.4 rad/s

Explanation:

The given parameters are;

The masses of each child, m₁, and m₂ = 60 kg

The mass of the merry-go-round, m₃ = 140 kg

The initial angular velocity, [tex]\omega_i[/tex] = 0.75 rad/s

The angular velocity after the children jump off = [tex]\omega_f[/tex]  

According to the principle of conservation of angular momentum

The angular momentum = I × ω

The moment of inertia, I = m × R²

The total initial angular momentum = [tex]I_i \times \omega_i = m_i \times R^2 \times \omega_i[/tex]

The total angular momentum after the children jump off = [tex]I_f \times \omega_f = m_f \times R^2 \times \omega_f[/tex]

The initial mass, [tex]m_i[/tex] = m₁ + m₂ + m₃ = 60 kg + 60 kg + 140 kg = 260 kg

The final mass, [tex]m_f[/tex] = m₃ = 140 kg

According to the principle of conservation of linear momentum, we have;

[tex]I_i \times \omega_i[/tex] = [tex]I_f \times \omega_f[/tex]

Therefore;

260 kg × R² × 0.75 rad/s = 140 kg × R² × [tex]\omega_f[/tex]

∴ [tex]\omega _f[/tex] = (260 kg × R² × 0.75 rad/s)/(140 kg × R²) = 1.39285714 rad/s. ≈ 1.4 rad/s

The angular velocity after the children jump off, [tex]\omega _f[/tex] ≈ 1.4 rad/s.

Answer:

Satellites don't fall from the sky because they are orbiting Earth. Even when satellites are thousands of miles away, Earth's gravity still tugs on them. Gravity--combined with the satellite's momentum from its launch into space--cause the satellite go into orbit above Earth, instead of falling back down to the ground.

Answer:

electric current is derived unit.

Explanation:

According to the definition of electric current, it appears to be a derived quantity. Charge on the other hand seems more fundamental than electric current.

Answer:

D. Meters/Seconds

Explanation:

The time period of a wave is measured in seconds.

A typical wave involves both time and distance.  Consider a sound wave, which is basically a periodic modulation of the local air pressure.  We "hear" the sound because our ears respond to the variations of pressure.

The most common metric of a sound wave is frequency.  This is the rate at which the change in pressure occurs, and is measured in cycles per second, formally known as "hertz".  The period is the inverse of frequency andl has the units of seconds per cycle, commonly stated simply as seconds.

Answer:

I. Period = 1.3 seconds

II. Frequency = 0.769 Hertz

Explanation:

Given the following data;

Number of oscillation = 240 cycles

Time = 5.2 minutes.

Conversion:

1 minute = 60 seconds

5.2 minutes = X seconds

X = 60 * 5.2

X = 312 seconds

To find the following;

I. Period

Mathematically, the number of oscillation of a pendulum is given by the formula;

[tex] Number \; of \; oscillation = \frac {Time}{Period} [/tex]

Making period the subject of formula, we have;

[tex] Period = \frac {Time}{Number \; of \; oscillation} [/tex]

Substituting into the formula, we have;

[tex] Period = \frac {312}{240} [/tex]

Period = 1.3 seconds

II. Frequency

[tex] Frequency = \frac {1}{Period} [/tex]

Substituting the values into the formula, we have;

[tex] Frequency = \frac {1}{1.3} [/tex]

Frequency = 0.769 Hertz

Answer:

Resistance is defined as the property of a conductor to resist the flow of charges through it. The resistance of conductor is numerically given as the ratio of potential difference across its length to the current flowing through it.

Explanation:

Answer:

Yes, when the 2 vectors are same in magnitude and direction. Yes, when the 2 vectors are same in magnitude but opposite in sense. Yes, when the 2 vectors are same in magnitude making an angle of 2π3 with each other.

Explanation:

Hope it helps you

The condition under which the resultant of two vectors will be zero is that the vectors must be in equilibrium.

The conditions under which the resultant of two non zero vectors acting on a body must be zero.

[tex]\bar R = \bar R_A + \bar R_B = 0[/tex]

Thus, the condition under which the resultant of two vectors will be zero is that the vectors must be in equilibrium.

Learn more here: https://brainly.com/question/17574217

Answer:

Part A would be 80 Joules and Part B would be 20 meters.

Explanation:

For Part A:

The first step is to convert the mass to SI units.

400 g = 0.4 kg

Next, we need to know that the law of conservation of energy states that the total energy of an isolated system is conserved. In this case, it means that the total energy at the bottom, where kinetic energy is greatest, will be equal to the total energy at the top, where gravitational potential energy is greatest.

Max Gravitational Potential Energy = Max Kinetic Energy

Max Gravitational Potential Energy = [tex]\frac{1}{2} mv^{2}[/tex]

Max Gravitational Potential Energy = [tex](\frac{1}{2} )(.4kg)(20m/s)^2[/tex] = 80[tex]J[/tex]

For Part B:

We need to once again set gravitational potential energy to kinetic energy, only this time we use the GPE equation and solve for height. We already solved for the kinetic energy so we just plug everything in and solve.

[tex]mgh = \frac{1}{2} mv^{2}[/tex]

[tex](.4kg)(10m/s^{2} )h = 80J\\h = 20m[/tex]

Explanation:

If the mass of the inclined plane is large enough, could N ever be equal to mgcosθ. Reasons?

So far I've come up with: mgcosθ−N=ma meaning if N were to equal mgcosθ, ma=0. Since the surfaces are frictionless and since N is acting on the inclined plane too(it'll have a horizontal component), this isn't possible. Am I right? Where am I going wrong?

Answer:

c) sin c /sin d

because light is moving from denser to shallower medium

b) refraction of light

Explanation:

Explanation:

I think it is the third image as marked in the diagram I kept above because as we know first class levers have the fulcrum between the force and the load

Answer:

HOPE IT HELP YOU A LOT :)

I prove it also .

Answer:

Newtons Second law of motion states that"The rate of change of momentum is directly proportional to the force applied"

Answer:

Their final relative velocity is 0.190 m/s

Explanation:

The relative velocity of the satellites, v = 0.190 m/s

The mass of the first satellite, m₁ = 4.00 × 10³ kg

The mass of the second satellite, m₂ = 7.50 × 10³ kg

Given that the satellites have elastic collision, we have;

[tex]v_2 = \dfrac{2 \cdot m_1}{m_1 + m_2} \cdot u_1 - \dfrac{m_1 - m_2}{m_1 + m_2} \cdot u_2[/tex]

[tex]v_2 = \dfrac{ m_1 - m_2}{m_1 + m_2} \cdot u_1 + \dfrac{2 \cdot m_2}{m_1 + m_2} \cdot u_2[/tex]

Given that the initial velocities are equal in magnitude, we have;

u₁ = u₂ = v/2

u₁ = u₂ = 0.190 m/s/2 = 0.095 m/s

v₁ and v₂ = The final velocities of the satellites

We get;

[tex]v_1 = \dfrac{2 \times 4.0 \times 10^3}{4.0 \times 10^3 + 7.50 \times 10^3} \times 0.095 - \dfrac{4.0 \times 10^3- 7.50\times 10^3}{4.0 \times 10^3+ 7.50\times 10^3} \times 0.095 = 0.095[/tex]

[tex]v_2 = \dfrac{ 4.0 \times 10^3 - 7.50\times 10^3}{4.0 \times 10^3 + 7.50 \times 10^3} \times 0.095 + \dfrac{2 \times 7.50\times 10^3}{4.0 \times 10^3+ 7.50\times 10^3} \times 0.095 = 0.095[/tex]

The final relative velocity of the satellite, [tex]v_f[/tex] = v₁ + v₂

∴ [tex]v_f[/tex] = 0.095 + 0.095 = 0.190

The final relative velocity of the satellite, [tex]v_f[/tex] = 0.190 m/s