The cells lie odjacent to the sieve tubes​

Answers

Answer 1

Answer:

Almost always adjacent to nucleus containing companion cells, which have been produced as sister cells with the sieve elements from the same mother cell.

Related Questions

True or False If the mass of the object increases, then the potential energy of the object decreases.​

Answers

False- the potential energy is force*distance and force is mass*acceleration so if there’s more mass, there’s more force, so there’s more potential energy
Hope that helps :)

3. A car travelling at 12 m/s into a stationary truck of about 10 times the cars mass. a. If the collision was completely inelastic, what velocity would the two travel at if the stuck together? b. If the collision was completely elastic, what would be the velocities of the car and truck after the collision? c. In order to exert a force of only 3500N on the truck during the collision, how much time would the collision have to take?

Answers

(a) The final velocity of the two vehicles if the collision was inelastic is 1.1 m/s.

(b)  For the elastic collision, the final velocity of the car is 9.81 m/s backwards and the final velocity of the truck is 2.19 m/s forward.

(c) The time taken to exert the given force is 0.00625 m (s).

The given parameters;

Initial velocity of the car, u₁ = 12 m/sInitial velocity of the truck, u₂ = 0Mass of the car, = mMass of the truck, = 10m

(a) The final velocity of the two vehicles if the collision was inelastic is calculated as follows;

[tex]m_1 u_1 + m_2u_2 = v(m_1+ m_2)\\\\12m + 10m(0) = v(m + 10m)\\\\12m = v(11m)\\\\v = \frac{12m}{11m} \\\\v = 1.1 \ m/s[/tex]

(b) The final velocity of the two vehicles if the collision was elastic is calculated as follows;

[tex]m_1 u_1 + m_2u_2 = m_1v_1 + m_2v_2\\\\\12m \ + \ 10m(0) = mv_1 + 10mv_2\\\\12m = m(v_1 + 10v_2)\\\\12 = v_1 + 10 v_2\ \ - --(1)[/tex]

Apply one-directional velocity equation:

[tex]u_1 +v_1 = u_2 + v_2\\\\12 + v_1 = 0 + v_2\\\\12+ v_1 = v_2 \ \ --- (2)[/tex]

Substitute the value of [tex]v_2[/tex] into equation (1);

[tex]12 = v_1 + 10(12 + v_1)\\\\12= v_1 + 120 + 10v_1\\\\12- 120 = 11v_1\\\\-108 = 11v_1\\\\v_1 = \frac{-108}{11} \\\\v_1 = -9.81 \ m/s\\\\[/tex]

Solve for [tex]v_2[/tex];

[tex]v_2 = 12 + v_1\\\\v_2 = 12 - 9.81\\\\v_2 = 2.19 \ m/s[/tex]

Thus, for the elastic collision, the final velocity of the car is 9.81 m/s backwards and the final velocity of the truck is 2.19 m/s forward.

(c)

The change in the momentum of the truck is calculated as;

[tex]\Delta P = m_2(v_2 - u_2)\\\\\Delta P = 10m(2.19)\\\\\Delta P = 21.9m[/tex]

The time taken to exert the given force is calculated as follows;

[tex]Ft = \Delta P\\\\t = \frac{\Delta P}{F} \\\\t = \frac{21.9 \ m}{3500} \\\\t = 0.00625 \ m (seconds)[/tex]

Learn more about elastic and inelastic collision here: https://brainly.com/question/12497950

The fastest possible rate of rotation of a planet is that for which the gravitational force on material at the equator just barely provides the centripetal force needed for the rotation. Calculate the minimum rotation period assuming a density of 3.70 g/cm3.

Answers

Answer:

m ω^2 R = centripetal force

G M m / R^2 = gravitational force

ω^2 = G M / R^3    for the forces to be equal

d (density) = M / V = M / (4/3 R^3) = 3/4 M / R^3

or M / R^3 = 4 d / 3

Then

ω^2 = G 4 d / 3

d = 3.7 g/cm^2 = 3700 kg/m*3    converting

ω^2 = 6.67E-11 * 3700 * 4 / 3 = 32.9E-8

ω = 5.74E-4

P = 1 / f = 2 pi / ω = 6.28 / 5.74E-4 = 1.09E4 sec

10900 / 3600 = 3.04 hrs    for the minimum rotation period

a 0.015 kg bullet traveling at 500 m/s strikes a 1.0 kg block of wood that is balanced on a table edge 0.92 m above the ground as shown to the right. the bullet buries itself in the block. calculate the horizontal distance, dx where the block hits the floor.

Answers

The horizontal distance where the block hits the floor is 3.2 m.

The given parameters:

mass of the bullet, m₁ = 0.015 kgspeed of the bullet, u₁ = 500 m/smass of block wood, m₂ = 1.0 kgheight of the table, h = 0.92 m

The final velocity of the bullet-block system after the collision is calculated by applying the principle of conservation of linear momentum;

[tex]m_1u_1 + m_2u_2 = v(m_1 + m_2)\\\\0.015(500) + 1(0) =v(0.015 + 1)\\\\7.5 = 1.015v\\\\v = \frac{7.5}{1.015} \\\\v = 7.39 \ m/s[/tex]

The time taken for the bullet-block system to fall to the floor after collision is calculated as follows;

[tex]h = v_0_yt + \frac{1}{2} gt^2\\\\h = 0 + \frac{1}{2} gt^2\\\\h = \frac{1}{2} gt^2\\\\t = \sqrt{\frac{2h}{g} } \\\\t = \sqrt{\frac{2\times 0.92}{9.8} }\\\\t = 0.43 \ s[/tex]

The horizontal distance where the block hits the floor is calculated as follows;

[tex]X = v_x t\\\\X = 7.39 \times 0.43\\\\X = 3.2 \ m[/tex]

Learn more about conservation of linear momentum here:https://brainly.com/question/24424291

Marks: 1
What is the power of a light that uses 300 joules of energy in 60
seconds?
18,000 W
50 W
5 W
0.2 W

Answers

Answer:

W = 5W

Explanation:

1W = 1J/s

W = Watts

J = Joules

s = seconds

W = J/s

W = 300J/60s

W = 5W

The number of wavelengths that pass a fixed point on a wave is called ______?

Answers

Explanation:

it's called a wave frequency

im pretty sure but than again I'm in Middle School but just trust me

Answer:

wave frequency i think. hope its helps

Motion Velocity
Reference point Speed

1. An object is in __________ when its distance from a(n) ________ is changing.

2. Speed is given direction is called _______________

3. ____________ can be calculated if you know the distance that an object travels in one unit of time.

Answers

Answer:

1. An object is in motion when its distance from another object is changing.

2.Speed is given direction is called velocity.

Speed can be calculated.......

I can learn new things but I cannot change how good I am at math. A strongly agree B. agree C disagree D. strongly disagree​

Answers

Mathematics is a broad subject that anyone who constantly practices by learning from first principle and from example will grow in perfection of the subject as time goes by. Hence, I strongly disagree

During my schools days, I struggled learning mathematics, at the time it was difficult, I began practising and learning from text examples, with time I got a hang of it and my grade and confidence level in the subject increased.

Learn more about Mathematics here:

https://brainly.com/question/6143254

A string of length 100 cm is held fixed at both ends and vibrates in a standing wave pattern. The wavelengths of the constituent travelling waves CANNOT be:

Answers

The wavelengths of the constituent travelling waves CANNOT be 400 cm.

The given parameters:

Length of the string, L = 100 cm

The wavelengths of the constituent travelling waves is calculated as follows;

[tex]L = \frac{n \lambda}{2} \\\\n\lambda = 2L\\\\\lambda = \frac{2L}{n}[/tex]

for first mode: n = 1

[tex]\lambda = \frac{2\times 100 \ cm}{1} \\\\\lambda = 200 \ cm[/tex]

for second mode: n = 2

[tex]\lambda = \frac{2L}{2} = L = 100 \ cm[/tex]

For the third mode: n = 3

[tex]\lambda = \frac{2L}{3} \\\\\lambda = \frac{2 \times 100}{3} = 67 \ cm[/tex]

For fourth mode: n = 4

[tex]\lambda = \frac{2L}{4} \\\\\lambda = \frac{2 \times 100}{4} = 50 \ cm[/tex]

Thus, we can conclude that, the wavelengths of the constituent travelling waves CANNOT be 400 cm.

The complete question is below:

A string of length 100 cm is held fixed at both ends and vibrates in a standing wave pattern. The wavelengths of the constituent travelling waves CANNOT be:

A. 400 cm

B. 200 cm

C. 100 cm

D. 67 cm

E. 50 cm

Learn more about wavelengths of travelling waves here: https://brainly.com/question/19249186

Answer This!!!!!!
I'll give brainliest to whoever gets it right.
And 100 Points!

Answers

Answer: Time (days) = 88, the (mass) = 0.2180

Explanation:

Time (days) = 88, the (mass) = 0.2180

The diagram shows the velocity-time graph for a car travelling in a straight line along a road. Calculate the acceleration between t = 2.0 s and t = 5.0 s.

Answers

Answer:

a = Δv/Δt = (0 - 20) / (5 - 2) = -6⅔ m/s²

A 2-kg object moving at 10 m/s has a 4-N force applied to it. Can you predict how the force will affect the object? A) yes, it will slow it down at a rate of 2 m/s2. B) yes, it will speed it up at a rate of 2 m/s2. yes, it will speed it up at a rate of 4 m/s2. D) It cannot be determined without more information.​

Answers

Answer:

D) It cannot be determined without more information.​

Explanation:

Velocity is a vector meaning it has both magnitude and direction.

Force and acceleration are also vectors.

Without knowing the directions of each, we cannot know if the mass has a speed (scalar value) change.

We can know that the mass will have a velocity change at the rate of 2 m/s² in the direction of the applied force.

If that force is applied in the direction of initial velocity, the velocity (and speed) will increase in magnitude in the same direction.

If that force is applied opposite of the initial velocity, the  the velocity (and speed) will decrease in magnitude in the same direction. If the acceleration lasts long enough, velocity will eventually become zero and then become negative. At the same time, speed will become zero, and then increase again as speed is the absolute value of the magnitude of velocity.

If the force is applied at any other angle, both the velocity and the speed will change in both magnitude and direction.

A body is moving along a circular path with variable speed, it has both radial and tangential acceleration.

Select one:
True
False

Answers

Answer:

True;   ar = v^2 / R      Radial acceleration because it moves in a circular path

    at = α R = tangential acceleration because its speed changes

a = at + ar    total acceleration equals sum of radial and tangential

Colloid - well ______ together but not ______________

Answers

Answer:Colloid - well compacted together but not one

Which of the following waves DO NOT require a medium to travel?

Answers

Answer:

hey man, think you forgot to put the questions

A mass of 0.01 kg of steam at a quality of 0.9 is contained in the cylinder as shown in Figure 1 below. The spring just touches the top of the piston. Heat is then added until the air expanded, and the spring is compressed by 15.7 cm. Calculate the final temperature of the steam in this cylinder. Sketch the process on a P-y and T-v diagrams with respect to saturation lines.​

Answers

A mass of 0.01 kg of steam at a quality of 0.9 is contained in the cylinder as shown in Figure 1 below. The spring just touches the top of the piston. Heat is then added until the air expanded, and the spring is compressed by 15.7 cm. Calculate the final temperature of the steam in this cylinder. Sketch the process on a P-v and T-v diagrams with respect to saturation lines K = 50 kN/m 160 kg 20 cm Figure 1 Piston cylinder with spring

A student catches a can of soda dropped from some unknown height by Mr. Fineman. If

the can was dropped from rest, and it is traveling at 8.9 m/s before it arrives in the

student's hand...

Answers

Answer:

v² = u² + 2gh

8.9² = 0² + 2(9.8)h

h = 4.0 m

v = at

t = 8.9/9.8

t = 0.91 s

Which of these do not affect fluid friction?
The surface of an object
The viscosity (thickness) of fluid an object is in
The shape of an object
The weight of an object

Answers

1) the surface of an object
Hope that helps

Find the net torque .

Answers

Answer:

Explanation:

I will ASSUME this means torque about the dot.

3) 20(3) + 10(6) - 30(4) = 0 N•m

4) 10(0.5) - 6sin45(1) = -0.7573593... or about 0.76 N•m CCW

5) 25(3) - 40sin30(4) = -5 N•m or 5 N•m CCW

6) 15(3) - 12(2) - 10sin45(6) = -21.4264068... or about 21 N•m CCW

Can someone help me with this problem?

Answers

Answer:

no

Explanation:

u flipped it i cant see

True or False If the mass of the object increases, then the potential energy of the object decreases.​

Answers

Answer:

The amount of gravitational potential energy an object has depends on its height and mass. The heavier the object and the higher it is above the ground, the more gravitational potential energy it holds. Gravitational potential energy increases as weight and height increases.

Explanation:

Answer:

Explanation:

It depends on where your reference frame for potential energy is chosen.

If a mass is above the reference origin and mass increases, potential energy will increase so the statement is FALSE

If the mass is at the reference origin and the mass increases, the potential energy stays constant at zero so the statement is FALSE

If the mass is below the reference origin and the mass increases, then the potential energy goes from a negative value to an even lower negative value so the statement in this case is TRUE

What are the three major types of severe weather? Describe at least two characteristics of each type

Answers

Answer:

High winds, hail, excessive precipitation, and wildfires are forms and effects of severe weather, as are thunderstorms, downbursts, tornadoes, waterspouts, tropical cyclones, and extratropical cyclones. Regional and seasonal severe weather phenomena include blizzards (snowstorms), ice storms, and duststorms.

Explanation:High winds-  wind speeds as low as 23 knots (43 km/h) may lead to power outages when tree branches fall and disrupt power lines. Once wind exceed 135 knots (250 km/h) within strong tropical cyclones and tornadoes, homes  completely collapse,  and significant damage is done to larger buildings. Total disruption occurs once wind exceeds 175 knots (324 km/h)

Tornado- Typically look like a narrow funnel reaching from the clouds to the ground. Their wind speed goes from 65 to 250 miles per hour.

"An extreme weather condition in which we face the high speed wind in combination with heavy snow."

As for any blizzard has the normal wind speed of about 40 mph, and the visibility range reduces to less then 500 ft.

Answer: High winds, hail, excessive precipitation, and wildfires are forms and effects of severe weather, as are thunderstorms, downbursts, tornadoes, waterspouts, tropical cyclones, and extratropical cyclones. Regional and seasonal severe weather phenomena include blizzards (snowstorms), ice storms, and duststorms.

Explanation:

Which statement about cultural differences in reinforcement is TRUE?
A. People from individualistic cultures may find the ability to get relatives jobs more reinforcing than people from
collectivistic cultures.
B. People from individualistic cultures may find awards that single them out as more reinforcing than people from
collectivistic cultures.
C. Women from individualistic cultures may place more importance on convenient working hours than women from
collectivistic cultures.
D. People from individualistic cultures find higher pay more reinforcing than people from collectivistic cultures.

Answers

People often wants to be recognized for their achievement. The true statement is that People from individualistic cultures may find awards that single them out as more reinforcing than people from

collectivistic cultures.

Individualism is simply known as a type of cultural system that place huge emphasis on the needs of the individual self more than those of the group/society.

It is often based on the individual self and its specific qualities that distinguishes one from others.

Collectivism is simply known as a cultural system that place emphasis on the needs of the group/society more than our self need self.

Learn more from

https://brainly.com/question/19253449

A tightly sealed house has a large ceiling fan that blows air out of the house and into the attic. The owners turn the fan on and forget to open any windows or doors. What happens to the air pressure in the house after the fan has been on for a while, and does it become easier or harder for the fan to do its job

Answers

Answer:

Assuming the attic is ventilated to the open air the air pressure inside the house gets lower and the fan job becomes easier. It will speed up because while the pressure differential across the fan is increased, the mass of air being moved has decreased.

This can be verified by running a household vacuum cleaner in hose mode. With the hose open and air moving through it, the motor speed will be at a certain level producing a certain noise pitch . Placing your hand over the hose end will decrease the pressure in the hose, reduce the volume of air moving and you will hear an increase in motor pitch as it speeds up under lower load conditions.

The area inside the vacuum hose is akin to the inside of a well sealed house with an attic fan running.

In the physical sciences, pressure is compressive stress at quite a point within a confined fluid or the perpendicular force per unit area.

What is Pressure?

The force exerted perpendicularly to an object's surface per unit area across which that force is dispersed is termed as pressure. In relation to the surrounding pressure, gauge pressure is the pressure.

The air pressure within the house decreases and the fan's task gets simpler if the attic is aired to the outside air. It will increase because the amount of air being moved is much less, while the pressure difference across the fan is greater.

Running a home vacuum in hose mode will demonstrate this. The motor speed will be maintained at a set level, producing a specific noise pitch, with the duct open and air flowing through it. You will notice an increase in motor pitch when it speeds up under reduced load situations by placing your finger over the hose end, which will also lower the pressure in the hose and limit the amount of air moving.

To know more about Pressure:

https://brainly.com/question/12971272

#SPJ2

An object accelerates at a rate of -3.2 m/s^2 to a velocity of 8 m/s over a time of 14 s. What was its initial velocity?

Answers

[tex]\text{Given that,}\\\\\text{Acceleration, a = -3.2 m s}^{-2}\\\\\text{Time, t = 14 sec}\\\\\text{Velocity, v = 8 m s}^{-1}\\\\\text{Initial velocity, v}_0 = ?\\\\\\v = v_0 +at\\\\\implies v_0 = v -at = 8 -(-3.2)(14) = 8 + 44.8 =52.8~ \text{m s}^{-1}[/tex]

How much potential energy does an 8 kg flower pot hanging 5 m above the ground have

Answers

Answer:

Explanation:

Relative to ground level it has

PE = mgh = 8(10)(5) = 400 J

PE = mgh => 8x5x9.81 => PE = 392.4 N

An object of mass 6.36 kg is released from rest and drops 2.05 m to the floor. The collision is completely inelastic. How much kinetic energy is lost during the collision

Answers

Answer:

Essentially all of it

Explanation:

The potential energy was

PE = mgh = 6.36(9.81)(2.05) = 127.90278 = 128 J

ignoring air resistance, this PE converts to KE

With no rebound final velocity is zero, so Kinetic energy lost = 128 J

A disgruntled physics student, frustrated with
finals, releases his tensions by bombarding the
adjacent building, 13.5 m away, with water
balloons. He fires one at 38◦
from the horizontal with an initial speed of 23.6 m/s.
The acceleration of gravity is 9.8 m/s
2
.
For how long is the balloon in the air?

Answers

Answer:

Explanation:

The balloon would require a time of

t = d/v = 13.5/ (23.6cos38) = 0.7259...s

to travel the horizontal distance.

the vertical position relative to the throw point at that time is

h = 0 + (23.6sin38)(0.7259) + ½(-9.8)(0.7259²)

h = 7.9652...

so as long as the adjacent building is at least 8.0 m higher than the student position, the balloon is in the air for 0.726 s.

If the building is shorter than 8.0 m above the student, the balloon will land on the building roof and will be in the air for a longer period of time

How might "Roller Coaster Physics" have been different if the author's purpose had been to warn
readers of the dangers of roller coasters?
Use at least two details from the passage to support your answer.

Answers

Answer: The answer is hupa loopa

Explanation:

A 0.50-kg block attached to an ideal spring with a spring constant of 80 N/m oscillates on a horizontal frictionless surface. The total mechanical energy is 25 J. The maximum speed of the block is:

Answers

Answer:

Explanation:

easy way

when system is all kinetic energy, velocity is at a maximum

E = ½mv²

v = √(2E/m) = √(2(25)/0.5) = √100 = 10 m/s

harder way

ω = √(k/m) = √(80/0.5) = √160 rad/s

When the system is entirely spring potential, the amplitude A is

E = ½kA²

A = √(2E/k) = √(2(25)/80) = 0.790569... = 0.79 m

maximum velocity is ωΑ = 0.79√160 = 10 m/s

Other Questions
correct single error in this. Try to appear relaxed, but not to relaxed In the diagram what is the length of the 3rd side? What is the function of the Moderator band in the right ventricle? Change Treaster in equilibrium Income Investment adultiplier =Y-S II 1-6 In au A the (ID Accure acanany Tax Increased by eas what will be the change in equilibrium Income if the slope of the saving function is 0.5 Initial equilibrium income was cu 1000 what will be the new squilibrium. & Incame after tax decrease Interprete your findings Which choices are equivalent to the expression below? 3sqrt5 + 8sqrt5A. 24 start 5B. 24 sqrt 10C. 11 sqrt 10D. 11 sqrt 5 A Ferris wheel is boarding platform is 2 meters above the ground, has a diameter of 48 meters, and rotates once every 5 minutes. How many minutes of the ride are spent higher than 38 meters above the ground How do you calculate an antilog?eg: antilog 2.1423 What was the Velvet Revolution? when did jose rizal died I need help with that, if you can, plz. I ty it I think is a not sure 1. What is Ms. Romans employment background?Ms. Roman's employment background is that she's been a police officer for 25 years.2. What statistics from police academies in the state of New Jersey were alarming to Ms. Roman?The statistics from the police academies in the state of New Jersey that were alarming to Ms. Roman are the rates between 65 and 80 percent of women are failing due to the physical fitness test.3. What was a major reason for women failing at the police academies?A major reason for women failing at the police academies are recruits needing to pass the fitness exam within 10 short workouts and only have three weeks to try to pass due to a new policy.4. What had these police recruits been required to do in order to reach the point in the process that allowed them to take the physical fitness test?Police recruits were required to pass very lengthy background checks, medical exams, psychological exams, and clearly quit any other job.5. What data does Ms. Roman share about women serving as police officers? What data does she share about women working as police chiefs?The data Ms. Roman shares about women serving as police officers is that less than 13% of the police officers hadn't changed much in the past 20 years. Only 3% of women were police chiefs in 2013.6. How are other countries doing when it comes to female representation in the police force compared to the US?When female representation in the police force compares to the US some countries have nearly twice as many women police officers.7. According to research, what are some positive results to having female police officers on the force?Positive results to having female police officers on the force include female police officers tending to have more of a positive influence, great job performance, trustworthiness, and fairness in the police force.8. What does Ms. Roman define as the main problem with the different policy agencies and their standards?Ms. Roman defines that the main problem in different policy agencies and their standards is that the the differing policy agencies and their standards is that the main focus is on physical strength.9. What should police academies also focus on, aside from physical strength, when recruiting officers?Other than physical strength police academies should focus on problem-solving skills, community policing, and interpersonal communication skills.10. What are some ways to encourage more female recruits to join the police force? How must the testing process be changed to ensure women are not unfairly excluded from the force?Some ways to encourage more female recruits to join the police force could be good salary package and suitable environments. When it comes to good salaries for the police force and an environment that feels safe and suitable with lack of sexual harassments then more women will join, some just cause they want to not for the "encouragement". The testing process could be conducted under fair supervision in order to ensure that women are not being unfairly justed from the force. PLS HELP ASAP!!!!!!!!!!!!!!!! Morgana Company identifies three activities in its manufacturing process: machine setups, machining, and inspections. Estimated annual overhead cost for each activity is $140,000, $240,000, and $54,000, respectively. The cost driver for each activity and the estimated annual usage are number of setups 2,000, machine hours 24,000, and number of inspections 1,200.Required:Compute the overhead rate for each activity. Which star has the highest surface temperatureA. blue star B. yellow star C. white star D. red star You must answer this question.You received an email from your new friend, Leela who has just enrolled in your school.Hi.The weekends are finally here. Let's go to the beach with our schoolmates. Which beach shall we go to and what can we do there? What should we bring?I will be waiting eagerly for your reply.Bye!Now write an email to your friend in about 80 words. Write your answer below. Difference between hardcopy and hardware According to Fidelity Investment Vision Magazine, the average weekly allowance of children varies directly as their grade level. In a recent year, the average allowance of a 9th-grade student was 9.66 dollars per week. What was the average weekly allowance of a 5 th-grade student? The Japanese economy has been experiencing slow growth. As a result the Prime Minister, who thinks John Maynard Keynes was the greatest economist ever, has decided to increase government spending. As head of the economic council the Prime Minister asks you to determine the size of the increase needed to bring the economy to full employment. Assume there is a GDP gap of 1 billion yen and the marginal propensity to consume (MPC) is .60. What advise do you give the Prime Minister? a. The recessionary gap is equal to 625 million yen. b. The inflationary gap is equal to 1 billion yen divided by 2.5 or 0.4 billion yen. c. The recessionary gap is equal to 1 billion yen divided by 2.5 or 0.4 billion yen. d. The inflationary gap is equal to 1 billion yen divided by 1.66 or 0.625 billion yen. Find the length of CV Please help will give brainliest