The graph below shows a cycle of a heat engine. Add the following labels to the graph. Some labels are used more than once.
Labels: Isobaric process; W= 0J; Work done on the system; Work done by the system.

I will give brainliest!

P.S. AL2006 if you see this please help!​

Answer:

  t = 0.437 s

Explanation:

Sound is a wave so its speed is constant

         v = x / t

         t = x / v

indicates that the distance is x = 150 m

         t = 150/343

         t = 0.437 s

this is the time it takes to hear the hit

To see the blow it is almost instantaneous since the speed of light is much greater c = 3 10⁸ m / s

Answer:

Explanation:

jjjgggyuuuuiiii hhjiiihuyyuuugggyujjhhhhggghhhjjhhhhjhhui

Answer:

International System of Units. it was established in 1960 by the 11the General Conference on Weights and Measures

Answer:

The resistance is 8.7 ohm.

Explanation:

Voltage, V = 110 V

mass, m = 1 kg

change in temperature, T = 100 - 20 = 80 C

time, t = 4 min = 4 x 60 = 240 s

specific heat, c = 4184 J/kg C

let the resistance is R.

The heat generated by the heater is used to the heat the water.

[tex]\frac{V^2}{R} t = m c T \\\\\frac{110^2}{R}\times 240 = 1\times 4184\times 80\\\\R = 8.7 ohm[/tex]

Answer:

d = 6.32 m

Explanation:

Given that,

The mass of a puck, m = 2 kg

It is pushed straight north with a constant force of 5N for 1.50 s and then let go.

We need to find the distance covered by the puck when move from rest in 2.25 s.

We know that,

F = ma

[tex]a=\dfrac{F}{m}\\\\a=\dfrac{5}{2}\\\\a=2.5\ m/s^2[/tex]

Let d is the distance moved in 2.25 s. Using second equation of motion,

[tex]d=ut+\dfrac{1}{2}at^2\\\\d=0+\dfrac{1}{2}\times 2.5\times (2.25)^2\\\\d=6.32\ m[/tex]

So, it will move 6.32 m from rest in 2.25 seconds.

Answer:

World Environment Day has been celebrated every year on 5 June, engaging governments, businesses and citizens in an effort to address pressing environmental issues

Explanation:

Answer:

The natural environment or natural world encompasses all living and non-living things occurring naturally, meaning in this case not artificial. The term is most often applied to the Earth or some parts of Earth.

Answer:

The distance between mirror and you is 2 ft.

Explanation:

diameter, d = 8 ft

radius of curvature, R = 4 ft

magnification, m = 0.5

focal length, f = R/2 = 4/2 = 2 ft

let the distance of object is u and the distance of image is v.

[tex]\frac{1}{f}=\frac{1}{v}+\frac{1}{u}\\\\\frac{1}{2}=\frac{1}{v}+\frac{1}{u}\\\\v = \frac {2 u}{u - 2}[/tex]

Use the formula of magnification

[tex]m = \frac{v}{u}\\\\0.5 =\frac { u}{u - 2}\\ \\u - 2 = 2 u \\\\u = -2 ft[/tex]

Answer:

Gap left = Change in length on heating

Gap=Initial length×Coefficient of linear expansion×change in temperature

Gap=10×0.000012×15m

⟹Gap=0.0018 m

this is an example u have to put your equation in it

Answer:

Serial circuit.   the current is constant.  

            the voltage across a given resistor is half the rating in a one-resistor circuit.

Parallel circuit    the voltage is constant

the current is half the value of the current with a single resistor

Explanation:

To answer exactly this exercise, you need the diagram or the indication of the type of circuit being used, since there are two possibilities, let's consider the results of each one.

Serial circuit.

The two resistance are one after the other.

In this case the current in the resistor sides is the same, that is, the current is constant in the circuit.

The voltage is proportional to the value of each resistor and if the two resistors are equal, the voltage across a given resistor is half the rating in a one-resistor circuit.

Parallel circuit

the two resistance is next to each other.

In this case the voltage is constant, that is, the voltage across the two resistors is the same as in the case of a single resistor.

The current is inversely proportional to the value of the resistance

          i₁ = V / R₁

          i₂ = V / R₂

for a single resistance

           I = V / R

these currents are related

          i = i₁ + i₂

if the two resistors have the same value the current is half the value of the current with a single resistor

Answer:

15.88

is the correct answer

Answer:

Charge of the particle is 1 coulomb.

Explanation:

Force, F:

[tex]{ \bf{F=BeV}}[/tex]

F is magnetic force.

B is the magnetic flux density.

e is the charge of the particle.

V is the velocity

[tex]{ \sf{20 = (5 \times e \times 4)}} \\ { \sf{20e = 20}} \\ { \sf{e = 1 \: coulomb}}[/tex]

Answer:

Alpha particles are more massive than beta particles.

Explanation:

The alpha particles are also called double-positive Heilum Nuclei because they have a charge of "+2" and a mass of 4 a.m.u. The properties of the alpha particles are as follows:

1. It possesses high energy due to high velocity. It is 7.7 MeV for most energetic from Rac (i.e: Bismuth-214)

2. It has a very high ionizing power. A 7.7 MeV particle produces about 0.2 x 10⁶ ions.

3. The range of alpha particles is very small. It is about 7 x 10⁻² m and only 4 x 10⁻⁵ m in aluminum for 7.7 MeV alpha-particle.

4. Alpha particles produce fluorescence on striking certain substances, such as zinc sulphide and bariumplatinocynide.

The beta particles are fast-moving electrons, which have a negligible mass.  

Hence, the correct option is:

Alpha particles are more massive than beta particles.

Answer:

[tex]\omega=3.135rad/s[/tex]

Explanation:

From the question we are told that:

initial Speed [tex]V_1=2.50[/tex]

Mass [tex]m=70.0kg[/tex]

Center of mass [tex]d=0.0.800m\[/tex]

Generally the equation for angular velocity is is mathematically given by

[tex]\omega=\frac{v}{r}\\\\\omega=\frac{2.50}{0.0800}[/tex]

[tex]\omega=3.135rad/s[/tex]

Answer:

Explanation:

Since energy is conserved:

2

mu  

2

​

=  

2

mv  

2

​

+mgh

⇒u  

2

=v  

2

+2gh

⇒(3)  

2

=v  

2

+2(9.8)(0.5−0.5cos60)

⇒v=2m/s

Acceleration of the simple pendulum is 2.62 m/s².

When a point mass is suspended from a fixed support by a light, non-extensible string, the instrument is said to be a simple pendulum.

Here,

Let the mass of the bob be m. The simple pendulum is attached to the fixed support with a string having length l. The pendulum makes an angle of 15° with the vertical from the equilibrium point.

Let T be the tension acting on the string.

As, the bob passes through the angle,

The weight of the bob becomes equal to the vertical component of the tension.

mg = T cos15°

Also, the horizontal component of the tension,

T sin15° = ma

By solving these two equations, we get that,

Acceleration of the simple pendulum,

a = g tan15°

a = 9.8 x 0.267

a = 2.62 m/s²

Hence,

Acceleration of the simple pendulum is 2.62 m/s².

To learn more about simple pendulum, click:

https://brainly.com/question/31816771

#SPJ3

Answer:

it becomes a p-type conductor

Explanation:

answer from gauth math

Answer:

 N = 107.94 N

Explanation:

For this exercise we must use Newton's second law.

Let's set a reference system with the x-axis parallel to the ground and the y-axis vertical

X axis

        Fₓ = ma

ej and

       N -F_y - W = 0

let's use trigonometry to decompose the applied force

     cos -35 = Fₓ / F

     sin -35 = F_y / F

     Fₓ = F cos -35

     F_y = F sin -35

     Fₓ = 40.0 cos -35 = 32.766 N

     F_y = 40.0 sin -35 = -22.94 N

we substitute

     N = Fy + W

     N = 22.94 + 85

     N = 107.94 N

Answer:

a) t = 3.6 s

b) d = 23 m

c) v = 13 m/s

Explanation:

Let t be the time the accelerating rider rides

the distance she travels is

d = ½3.6t²

the distance for the other cyclist is

d =3.5(t + 3)

½3.6t² = 3.5(t + 3)

1.8t² - 3.5t - 10.5 = 0

quadratic formula, positive answer

t = (3.5 + √(3.5² - 4(1.8)(-10.5))) / (2(1.8))

t = 3.575786...

d = ½(3.6)(3.575786²) = 23.015...

v = 3.6(3.575786) = 12.8728...

11.54 minutes

Explanation:

The decay rate equation is given by

[tex]N = N_0e^{-\frac{t}{\lambda}}[/tex]

where [tex]\lambda[/tex] is the half-life. We can rewrite this as

[tex]\dfrac{N}{N_0} = e^{-\frac{t}{\lambda}}[/tex]

Taking the natural logarithm of both sides, we get

[tex]\ln \left(\dfrac{N}{N_0}\right) = -\left(\dfrac{t}{\lambda}\right)[/tex]

Solving for [tex]\lambda[/tex],

[tex]\lambda = -\dfrac{t}{\ln \left(\frac{N}{N_0}\right)}[/tex]

[tex]\:\:\:\:= -\dfrac{(24\:\text{minutes})}{\ln \left(\frac{1000\:\text{counts/min}}{8000\:\text{counts/min}}\right)}[/tex]

[tex]\:\:\:\:=11.54\:\text{minutes}[/tex]

Answer:

the closest distance that she can see an object clearly when she wears her contacts is 22.2 cm

Explanation:

Given the data in the question,

near point = 20 cm

far point = 2 m = 200 cm

Now, for an object that is infinitely far away, the image is at is its far point.

so using the following expression, we can determine the focal length

1/f = 1/i + 1/o

where f is the focal length, i is the image distance and o is the object distance.

here, far point i = 2 m = 200 cm  and v is ∞

so we substitute

1/f = 1/(-200 cm)  +  1/∞

f = -200 cm

Also, for object at its closest point, the image appear at near point,

so

1/f = 1/i + 1/o

we make o the subject of formula

o = ( i × f ) / ( i - f )

given that near point i = 20 cm

we substitute

o = ( -20 × -200 ) / ( -20 - (-200) )

o = 4000 / 180

o = 22.2 cm

Therefore, the closest distance that she can see an object clearly when she wears her contacts is 22.2 cm

Answer:

c.

magnitude of displacement

=F×s×cosa=2×g×0,8×cos90°= 0

The work done by gravity on a ball of 2 kg which is moving with a constant speed of 6 meter per second is zero. Thus, the correct option is A.

Work is the energy transfer to or from an object through the application of force along with the displacement. For a constant force aligned with the direction of motion, the work done is equal to the product of the force strength which is applied and the distance traveled by the object.

Work = Force × Displacement

Force = Mass × Acceleration

Acceleration of the ball is zero as it is moving with a constant speed. Therefore, the work done by the gravity is zero.

Therefore, the correct option is A.

Learn more about Work done here:

https://brainly.com/question/13662169

#SPJ2

Answer:

Measurements refers to a process which typically involves identifying and determining the dimensions of a physical object.

Explanation:

A scientific method can be defined as a research method that typically involves the use of experimental and mathematical techniques which comprises of a series of steps such as systematic observation, measurement, and analysis to formulate, test and modify a hypothesis.

Measurements refers to a process which typically involves identifying and determining the dimensions of a physical object.

Basically, the dimensions include important parameters such as width, height, length, area, volume, circumference, breadth, etc.

Answer:

Lubrication

Explanation:

People oil/lubricate bicycle chains because the chain turns around the cogs and rub together so this help with friction.

Hope this helps :)

Answer:

The method of reducing friction are :

i) In moving parts of machine friction can be reduced by using a ball bearing between the moving surfaces

ii) The bodies of aeroplane ,ship ,boat etc are made streamlined to reduce friction.

iii) Friction can be reduced by polishing rough surfaces. For example : carrom boards are highly polished to reduce friction.

I hope this help you:)

Answer:

asdasd dsa dasdasd sadas dasd asdasd asd asd dsa asdd 223 aasd ada dasd sa dasd dsaa sd adsd asasd

Explanation:

Answer:

So, with 2 Faraday of electricity, we can decompose (2/4 × 2) = 1 mole of water. So 18 grams of water is decomposed.

[tex]F = 5.93×10^{13}\:\text{N}[/tex]

Explanation:

Given:

[tex]m_1= 2×10^{16}\:\text{kg}[/tex]

[tex]m_2= 4×10^{22}\:\text{kg}[/tex]

[tex]r = 30000\:\text{km} = 3×10^7\:\text{m}[/tex]

Using Newton's universal law of gravitation, we can write

[tex]F = G\dfrac{m_1m_2}{r^2}[/tex]

[tex]\:\:\:\:=(6.674×10^{-11}\:\text{N-m}^2\text{/kg}^2)\dfrac{(2×10^{16}\:\text{kg})(4×10^{22}\:\text{kg})}{(3×10^7\:\text{m})^2}[/tex]

[tex]\:\:\:\:= 5.93×10^{13}\:\text{N}[/tex]

Answer:ew

Explanation:

qeeqw

Answer:

100 Joules

Explanation:

Applying,

W = mgh................... Equation 1

Where W = workdone to hold the box above the ground, mg = weight of the box, h = height of the box.

From the question,

Given: mg = 10 newtons, h = 10 meters.

Substitute these values into equation 1

W = 10×10

W = 100 Joules.

Hence the amount of workdone is 100 Joules