Two asteroids crashed. The crash caused both asteroids to change speed. Scientists want to use the change in speed and motion to figure out which asteroid has more mass. Based on the information in the diagram, which statement is correct? In your answer, explain what the forces were like and why the asteroids changed their motion.

Asteroid 1 has more mass than Asteroid 2.
Asteroid 1 and Asteroid 2 are the same mass.
Asteroid 1 has less mass than Asteroid 2.

Answer:

1 x 10 -10 whisper at 1m distance.

Explanation:

Answer:

The change in intensity is 63%.

Explanation:

intensity level = 18 db

Let the intensity is I.

Io = 10^(-12) W/m^2

Use the formula of intensity

[tex]dB = 10 log\left ( \frac{I}{Io} \right )\\\\18 = 10 log\left ( \frac{I}{Io} \right )\\\\1.8 = log\left ( \frac{I}{Io} \right )\\\\\left ( \frac{I}{Io} \right )=63.1[/tex]

So, the change in intensity is 63%.

Explanation:

The derivative of a constant term is always 0. So the acceleration of the body would be zero. Hence, the acceleration of a body moving with uniform velocity will always be zero.

hope it helps you

Answer:

A simple siphon raises water over a crest and discharges it at a lower level.It works coninueasly due to pull of gravity.

Explanation:

Siphons are tubes which draw fluid over the rim of a tank to a lower point. After an initial pressure change to initiate the flow, siphons operate continuously due to the pull of gravity.

Working:

A simple siphon raises water over a crest and discharges it at a lower level. As water flows through a siphon, energy due to pressure and elevation is either lost to pipe friction or converted to velocity energy.

Answer:

V1 = 4/3 pi R^3 = pi D^3 / 6     D = 2 R       volume of sphere

V2 = pi r^2 L = pi d^2 L / 4       volume of wire

V2 / V1 = 1 = 3/2 d^2 L / D^3     since volumes are equal

L = 2/3 D^3 / d^2 = 2/3 * 6^3 / .02^2 = 360,00 cm = 3600 m

Answer:

The number of turns in the solenoid is 19506.

Explanation:

Length of solenoid, L = 0.28 m

Magnetic field, B = 7 T

Current, I = 80 A

Let the number of turns is N.

The formula used to find the magnetic field is

[tex]B = \frac{\mu 0N I}{L}\\\\7 = \frac{4 \times 3.14\times 10^{-7}\times N\times 80}{0.28}\\\\N = 19506[/tex]

Fx = 295.4N

180°-90°-35°= 55°

F= m(a)

Fy = 43kg(9.81m/s²)

Fy = 421.83N

tan(55°) = 421.83N/Fx

Fx = 421.83N/tan(55°)

Fx = 295.3685458N

Each component describes the influence of that chain in the given direction. The vertical component describes the upward influence of the force upon Fido and the horizontal component describes the rightward influence of the force upon Fido.

The kinetic frictional force is always in the direction opposite to the velocity of the object.

Learn more about  horizontal component, refer

https://brainly.com/question/18333367

#SPJ2

D. The density of the sir increases and the air rises.

When coming in contact with the kettle, it becomes hot, it expands and rises up, due to lesser density as compared to the surrounding air.

Answer:

1. The efficiency of the radiator is 90 %

2. The efficiency of the torch is 65 %

3. The efficiency of the car is 40 %

4. The efficiency of the energy saver is 70 %

5. The efficiency of the speaker is 50 %

Explanation:

Efficiency = (Useful energy out ÷ Total energy in) × 100 J

1. Useful energy = 900 J

The total energy in = 1000 J

The efficiency of the radiator = ((900 J)/(1,000 J)) × 100 % = 90 %

2. Useful energy = 65 J

The total energy in = 100 J

The efficiency of the torch = ((65 J)/(100 J)) × 100 % = 65 %

3. Useful energy = 4,000 J

The total energy in = 10,000 J

The efficiency of the car = ((4,000 J)/(10,000 J)) × 100 % = 40 %

4. Useful energy = 700 J

The total energy in = 1,000 J

The efficiency of the energy saver = ((700 J)/(1,000 J)) × 100 % = 70 %

5. Useful energy = 50 J

The total energy in = 100 J

The efficiency of the speaker = ((50 J)/(100 J)) × 100 % = 50 %

We know

[tex]\boxed{\sf a=\dfrac{v-u}{t}}[/tex]

[tex]\\ \sf\longmapsto t=\dfrac{v-u}{a}[/tex]

[tex]\\ \sf\longmapsto t=\dfrac{18-80}{-16}[/tex]

[tex]\\ \sf\longmapsto t=\dfrac{-62}{16}[/tex]

[tex]\\ \sf\longmapsto t=3.8s[/tex]

Answer:

displacement=specific distance

*Velocity=∆displacement/time

*acceleration=∆velocity/time

Answer: This phenomenon happens due to upthrust exerted by water.

Explanation:

We know that,

Liquid Pressure is directly proportional to the height of the vertical column in the liquid.(P∝h)

When a bucket filled water is sunk into the water container, there occur difference in the pressure in top and bottom of the water container. Due to this, water exerts an upward force on the bucket filled with water. This is called Uprthrust.

Upthrust on the bucket makes the bucket filled with water lose some of it's weight and causes apparent loss in weight.

Hence, the bucket filled with water seems light while it sinks into water.

Answer:

Current- the flow of free charges, such as electrons and ions

Drift velocity- the average speed at which these charges move

Answer:

An electric current is the stream of changed particals, such as electrons & ions, moving through an electrical conductor.

The average velocity attained bycharged partical ,such as electrons,in a material due to electric fields

That's a parallel circuit. (B)

When current from Point-A reaches the 3-way intersection just to the right of Point-B, it has to make a choice:  Either turn left, go through B, and light the lower bulb, or go straight and light the upper bulb.

A circuit that has any "decision" points in it is a parallel circuit.  What happens in the real world is:  The current splits up.  Some of the current that reaches the intersection turns left toward Point-B, and the rest of it goes straight up.

A series circuit is one in which there's only one possible path all the way around.  There are no intersections of more than 2 roads, and no electron ever has to decide which way to flow.

An open circuit is one in which there's a break somewhere along the line and electrons can't jump across it.  It's like a railroad where a big piece is cut out of the track somewhere.  So no trains can travel on that route, and there's no current flowing anywhere in the circuit.

I'm not so sure about a "combination" circuit.  I guess you could give that name to a complicated circuit that has some series parts and some parallel-parts.  Personally, I'd call that a "series-parallel" circuit.  But it really doesn't matter right now.  Whatever the word means, the circuit in the picture is definitely not a "combination" circuit.

Answer:

B. Parallel Circuits

Explanation:

A parallel circuit is constructed by connecting the terminals of all the individual load devices so that the same value of voltage appears across each component. In a parallel circuit, charge divides up into separate branches such that there can be more current in one branch than there is in another.

hope i helped

Answer:

Explanation: The voltage or potential difference between two points is defined to be the change in ... I = qnAv relates the drift velocity to the current

Answer:

the magnetic compass is used to determine direction because it is one of the most accurate form of magnet as we already know that a freely suspended magnet always faces towards north direction and south direction

Answer:

18 Nm

Explanation:

if the correct answer

Answer:

0.80 m

Explanation:

Neglecting friction, the total mechanical energy of the pendulum is constant.

E = K + U where K = kinetic energy and U = potential energy.

At its release point of 0.80 m, the pendulum bob has a mechanical energy which is equal to its potential energy, since, its initial kinetic energy is zero. By the time the bob swings to the other end, it has a mechanical energy equal to it initial potential energy since total energy is conserved.

Neglecting friction, the pendulum bob would swing back to its original height of 0.80 m since the total mechanical energy is conserved and at its highest point, it is purely potential energy.

So, the height the pendulum bob swings to after release from a height of 0.80 m neglecting fiction is 0.80 m.

Velocity is directly propertional to dusplacement.Displacement is the shortest dustance between any two points but in a circle dispalcement changes each time as direction is not constant.So, velocity of body in a circular path is variable......

Answer:

38500

Explanation:

I looked it up so it may be wrong

Answer:

20m in 2 secs

Explanation:

t=2s

s=20m

hence the maximum height reached by stone is 20m in 2 s

Answer:

2.5 m

Explanation:

Potential energy is the energy stored in an object as a result of its position relative to other objects

The change in potential energy is given by:

ΔPE = mgh;

where ΔPE is the change in potential energy, m is the mass if the object, g is the acceleration due to gravity and h is the change in height of the object.

Hence given that g = 10 m/s², ΔPE = 150 J, m = 6 kg, hence:

ΔPE = mgh

150 = 6 * 10 * h

150 = 60h

h = 2.5 m

Hence the change in height is 2.5 m

Answer:

A lemon squeezer is a small kitchen utensil designed to extract juice from lemons or other citrus fruit such as oranges, grapefruit, or lime. It is designed to separate and crush the pulp of the fruit in a way that is easy to operate.

Answer:

A lemon squeezer is a small kitchen utensil designed to extract juice from lemons or other citrus fruit such as oranges, grapefruit, or lime. It is designed to separate and crush the pulp of the fruit in a way that is easy to operate.

Explanation:

stay safe

To create an electromagnetic field, a magnetic and electric field is involved.

Electromagnetic field consists of both electric and magnetic fields which are produced by human activities through the use of electricity.

With the above definition of electromagnetic field, it's production will involve:

These fields oscillate in perpendicular planes with respect to each other, and are in phase.

Therefore, to create an electromagnetic field, a magnetic and electric field is involved.

Learn more about electromagnetic field here:

https://brainly.com/question/1594186

Answer:

I need this as well

Explanation:

If the poster got the project, please let me know. I'm struggling on this unit and if you don't want to give out the project, help is appreciated too! thanks

Answer:

Explanation:

High concentrations of hydrogen ions yield a low pH (acidic substances), whereas low levels of hydrogen ions result in a high pH (basic substances). The overall concentration of hydrogen ions is inversely related to its pH and can be measured on the pH scale

Explanation:

1ml = 2.7g

Xml = 1.5g

Divide 1.5 by 2.7 to find X.

Obviously, since 1.5 is less than 2.7, you know the answer will be less than 1.

(it’s .5555555555)

Answer:

3.125J

Explanation:

K.E.= 1/2(mass)(velocity)^2

K.E.=1/2(0.25)(5)^2=3.125

Answer:

Pascal's law says that pressure applied to an enclosed fluid will be transmitted without a change in magnitude to every point of the fluid and to the walls of the container.

Explanation:

The pressure at any point in the fluid is equal in all directions.

Explanation:

According to pascal law ,Force applied on bulk of water in a container will be distributed to all molecules of water...

Answer:

which language is this

Explanation: