Use the periodic table to answer the question.

An illustration shows the periodic table of elements with elements arranged in increasing order of atomic number in 18 columns (groups) and 7 rows (periods).

Which comparison is correct?

(1 point)

PH3 is a stronger acid than NH3.
PH, 3, is a stronger acid than NH, 3, .

HF is a stronger acid than HCl.
HF is a stronger acid than HCl.

H2S is a stronger acid than HCl.
H, 2, S is a stronger acid than HCl.

NH3 is a stronger acid than HF.

Answer:

The answer is "0.82 c".

Explanation:

Given:

Spacecraft speed 1 is [tex]u = + 0.66 \ c[/tex]

Space velocity 2 relative to spacecraft 1 is [tex]v = + 0.34\ c[/tex]

The spacecraft velocity 2 measured by the Earth observation

   [tex]\to u' = \frac{u +v}{1 + ( \frac{uv}{c^2})}[/tex]

            [tex]= \frac{0.66 \ c +0.34\ c}{ 1+ (\frac{0.66\ c \times 0.33\ c }{c^2})}\\\\ = \frac{1 \ c }{ 1+ (\frac{0.2178\ c^2 }{c^2})}\\\\ = \frac{1 \ c }{ 1+ (0.2178 )}\\\\ = \frac{1 \ c }{ 1.2178 }\\\\=0.82\ c[/tex]

9514 1404 393

Answer:

  1.114 kg/m³

Explanation:

The total mass of the air in the balloon and the balloon + cargo will be the mass of the displaced air. If d is the density of the air in the balloon, then we have ...

  2910d +308 = 2910×1.22

Solving for d, we find ...

  2910d = 2919(1.22) -308

  d = 1.22 -308/2910

  d ≈ 1.114 . . . kg/m³

The density of the hot air is about 1.114 kg/m³.

Answer:

b) - 3.3 J

Explanation:

Given;

mass, m = 2 kg

initial extension of the spring, x = 6 cm = 0.06 m

The weight of the mass on the spring;

W = mg

where;

g is acceleration due to gravity = 9.81 m/s²

W = 2 x 9.81

W = 19.62 N

The spring constant is calculated as;

W = kx

k = W/x

k = 19.62 / 0.06

k = 327 N/m

The work done by the spring when it is extended to an additional 10 cm;

work done = force x distance

distance = extension, x =  10 cm = 0.1 m

The work done by the spring opposes the applied force by acting in opposite direction to the force.

W = - Fx

W = - (kx) x

W = - kx²

W = - (327) x (0.1)²

W = - 3.27 J

W ≅ - 3.3 J

Therefore, the work done by the spring by opposing the applied force is -3.3 J

I assume the curve is flat and not banked. A car making a turn on the curve has 3 forces acting on it:

• its weight, mg, pulling it downward

• the normal force from contact with the road, n, pushing upward

• static friction, f = µn, directed toward the center of the curve (where µ is the coefficient of static friction)

By Newton's second law, the net forces on the car in either the vertical or horizontal directions are

∑ F (vertical) = n - mg = 0

∑ F (horizontal) = f = ma

where a is the car's centripetal acceleration, given by

a = v ²/r

and where v is the maximum speed you want to find and r = 25 m.

From the first equation, we have n = mg, and so f = µmg. Then in the second equation, we have

µmg = mv ²/r   ==>   v ² = µgr   ==>   v = √(µgr )

So the maximum speed at which the car can make the turn without sliding off the road is

v = √(0.80 (9.80 m/s²) (25 m)) = 14 m/s

Answer:

rock go down

Explanation:

what comes up must come down.

Answer:

opposite direction

Explanation:

An electric field is defined as a physical field which surrounds the electrically charged particles that exerts force on the other particles on the field.

Now when an electron or a negatively charged particle enters a uniform electric field, the electric forces acts on the negatively charged particles and it forces the particle to move in the direction which is opposite to the direction of the field. In an uniform electric field, the field lines are parallel.

Answer:

Explanation:

negatively charged particle is placed inside uniform electric field

The force on the charge due to the electric field is

F = q E

when the charge is negative so the force on the charge is opposite to the direction of electric field.

The electric field is opposite to the force.

Answer:

C. Mass

Explanation:

Answer:poop

Explanation:

poop

Answer:

the correct one is C

Explanation:

To find the answer, let's propose the solution of the problem

We create a system formed by the child and the platform so that all the forces have been internal and the angular momentum is conserved.

Initial instant. Before starting to walk

          L₀ = 0

Final moment. After the child is walking

          L_f = I₁ w₁ + m r v₂

where index 1 is used for the platform and index 2 for the child

linear and angular velocity are related

          v₂ = w₂ r

angular momentum is conserved

          0 = I₁ w₁ + m r (w₂ r)

          w₁ =  [tex]- \frac{m r^2}{I1} \ w_2[/tex]

the moment of inertia of the platform bringing it closer to a disk or cylinder

         I₁ = [tex]\frac{1}{2}[/tex] M r²  

sustitute

          w₁ = [tex]- \frac{2 m }{M} \ w_2[/tex]

          W₁ = - [tex]- \frac{2 40}{30} \ w_2 = - \frac{8}{3} \ w_2[/tex]

from here we can see that the platform and the child rotate in the opposite direction and with different angular speeds

when examining the answers the correct one is C

Answer:

Explanation:

relative to the ground the boy moves in a counter clockwise motion , now the boy and the wheel are one system

so by conservation of angular momentum their net sum of angular momentum relative to a point outside the system(say ground) should be zero

so the wheel moves in a clockwise direction , their angular velocity may or may not be same depending on I. so option D is wrong

option B is wrong because relative to ground their angular momentum should be equal and opposite

For more information on this visit

https://brainly.com/question/23379286

Question:- A scientist who studies the tiny microorganisms of the environment

Explanation:-

Microbiologist means a person who studies micro sized living organisms

Microbiologist word is combination of two words Micro and biologist

Answer:

microbiologist i think

hope it helps

please mark Brainliest if you think the answer is correct

Answer:

375 is the answer.

Explanation:

Speed : Distance / Time taken

S: m/ s

s: 1500/4

375 m / s answer

Answer:

375m per minute

Explanation:

if you are looking for a diffrent unit just multiply your answer by however many minutes are in that time frame

Answer:

a) Dielectric constant ( λ ) = 750 * 10^-9 m

   minimum thickness of coating ( d )  = 187.5 nm

b) 3.6%

Explanation:

Given data:

wavelength of red light in air = 750 nm

εr = 4

μr = 1,  σ = 0

a) Determine the required dielectric constant and min thickness of coating used

Refractive index of coating ( n ) = √εr * μr =  √4*1 = 2

the refractive index of glass( ng)  = 1.5 which is < 2

λ = 750 * 10^-9 m

Dielectric constant ( λ ) = 750 * 10^-9 m

To determine the minimum thickness we will apply the formula below

d = m λ/2n ;  where  m = 1

∴ d = 750 nm / 2 ( 2 )

      = 187.5 nm

minimum thickness of coating ( d )  = 187.5 nm

b) Determine the percentage of the incident power that will be reflected

R = [ ( n-1 / n + 1 ) - ( n - ng / ng + n ) ]^2

   = [ ( 2 - 1 / 2 + 1 ) - ( 2 - 1.5 / 1.5 + 2 ) ]^2

   = 0.03628 =  3.6%

Answer:

The wavelength is "[tex]=16.5675\times 10^{-18} \ m[/tex]".

Explanation:

Given:

Mass,

m = [tex]1\times 10^{-11} \ g[/tex]

Speed,

V = [tex]0.400 \ cm/s[/tex]

or,

  = [tex]0.4\times 10^{-2}[/tex]

According to De Broglie,

The wavelength will be:

⇒ [tex]\lambda = \frac{h}{mV}[/tex]

      [tex]=\frac{6.627\times 10^{-34}}{1\times 10^{-11}\times 10^{-3}\times 0.4\times 10^{-2}}[/tex]

      [tex]=16.5675\times 10^{-18} \ m[/tex]

So, blood cells move these wavelength.

Answer:

[tex]0.2677\ \text{V/m}[/tex]

Explanation:

A = Area of loop = [tex]0.129\times0.402[/tex]

B = Magnetic field = [tex]0.888\ \text{T}[/tex]

t = Time taken = [tex]0.172\ \text{s}[/tex]

Electric field is given by

[tex]E=B\dfrac{dA}{dt}\\\Rightarrow E=0.888\times\dfrac{0.129\times 0.402}{0.172}\\\Rightarrow E=0.2677\ \text{V/m}[/tex]

The emf induced is [tex]0.2677\ \text{V/m}[/tex].

Answer:

15.88°C I am not 100% sure this is right but I am 98% sure this IS right

Answer:

V = V0 + a t

V = 75 - 9.8 * 3 = 45.6 m/s

The final velocity of the projectile after 3 seconds is equal to 45.6 m/s.

The equations of motion can be defined as the relation of the motion of a physical system as the function of time and set up the relationship between the displacement (s), acceleration, velocity (v & u), and time of a moving system.

Given, the initial velocity of the projectile, u = 75 m/s

The time taken by the projectile, t = 3 sec

The acceleration due to gravity upward, g = - 9.8 m/s²

From the first equation of motion we can calculate the final velocity of the projectile:

v = u + at

v = u - gt

v = 75 - 9.8 ×(3)

v = 75 - 29.4

v = 45.6 m/s

Therefore, the final velocity of the projectile after three seconds is 45.6 m/s.

Learn more about the equation of motion, here:

brainly.com/question/16982759

#SPJ2

Answer:

2

Explanation:

pulling force because of it force

Answer:

5.9 cm

Explanation:

f: frequency of oscillation

frequency of oscillationk: spring constant

frequency of oscillationk: spring constantm: the mass

[tex]f = \frac{1}{2\pi} \sqrt{ \frac{k}{m} } [/tex]

in this problem we know,

F= 1.4 Hz

m= 0.26 kg

By re-arranging the formula we get

[tex]k = {(2\pi \: f )}^{2} m = {(2\pi(1.4hz))}^{2} 0.26kg = 20.1 \frac{n}{m} [/tex]

The restoring force of the spring is:

F= kx

where

F= 1.2 N

k= 20.1 N/m

x: the displacement of the block

[tex]x = \frac{f}{k} = \frac{1.2 \: n}{20.1 \frac{n}{m} } = 0.059m \: = 5.9 \: cm[/tex]

Answer:

The correct answer is "4.443 sec".

Explanation:

Given:

Mass of child,

= 34 kg

Mass of swing,

= 18 kg

Length,

= 4.9 m

The time period of pendulum will be:

T = [tex]2 \pi \sqrt{4g}[/tex]

  = [tex]2 \pi \sqrt{\frac{4.9}{9.8} }[/tex]

  = [tex]4.443 \ sec[/tex]  

Answer:

The time taken to back and forth is 4.4 s .

Explanation:

Length, L = 4.9 m

let the time period is T.

Acceleration due to gravity, g = 9.8 m/s^2

Use the formula of time period

[tex]T = 2 \pi\sqrt{L}{g}\\\\T = 2 \times 3.14\sqrt{4.9}{9.8}\\\\T = 4.4 s[/tex]

Answer:

The electric field is 9.3 x 10^12 N/C and the direction is away from the charge.

Explanation:

charge, Q = 12.5 C

distance, d = 11 cm = 0.11 m

Let the electric field is E.

[tex]E =\frac{K Q}{d^2}\\\\E = \frac{9\times 10^9\times 12.5}{0.11\times 0.11}\\\\E = 9.3\times 10^{12} N/C[/tex]

The direction of electric filed is away from the charge.

Answer:

(a)  209 Watt

(b) 4482.8 seconds

Explanation:

(a) P = 50×4.18

Where P = rate of heat loss in watt

    P = 209 Watt

Applying,

Q = cm(t₁-t₂)................ Equation 1

Where Q = amount of heat given off, c = specific heat capacity capacity of human, m = mass of the person, t₁ and t₂ = initial and final temperature.

From the question,

Given: m = 90 kg, t₁ = 40°C, t₂ = 37°C

Constant: c = 3470 J/kg.K

Substtut these values into equation 1

Q = 90×3470(40-37)

Q = 936900 J

But,

P = Q/t.............. Equation 2

Where t = time

t = Q/P............ Equation 3

Given: P = 209 Watt, Q = 936900

Substitute into equation 3

t = 936900/209

t = 4482.8 seconds

The frequency is 4,6E14 Hz.

What is the frequency?

Frequency is the fee at which modern changes direction in step with 2nd. it's far measured in hertz (Hz), a worldwide unit of degree wherein 1 hertz is identical to 1 cycle in line with 2d. Hertz (Hz) = One hertz is the same as 1 cycle in step with the second. Cycle = One entire wave of alternating present-day voltage.

Frequency describes the number of waves that pass a hard and fast place in a given quantity of time. So if the time it takes for a wave to skip is half of 2d, the frequency is 2 per 2nd. If it takes 1/one hundred of an hour, the frequency is a hundred in step with hour.

Learn more about frequency here:-https://brainly.com/question/254161

#SPJ2

Answer:

Ecologist.

Your answer is Ecologist.

(Ecologist) is a scientist who studies the whole environment as a working unit.

Answer:

1.24

Explanation:

The resistivity of copper[tex]\rho_1=2.65\times 10^{-8}\ \Omega-m[/tex]

The resistivity of Aluminum,[tex]\rho_2=1.72\times 10^{-8}\ \Omega-m[/tex]

The wires have same resistance per unit length.

The resistance of a wire is given by :

[tex]R=\rho \dfrac{l}{A}\\\\R=\rho \dfrac{l}{\pi (\dfrac{d}{2})^2}\\\\\dfrac{R}{l}=\rho \dfrac{1}{\pi (\dfrac{d}{2})^2}[/tex]

According to given condition,

[tex]\rho_1 \dfrac{1}{\pi (\dfrac{d_1}{2})^2}=\rho_2 \dfrac{1}{\pi (\dfrac{d_2}{2})^2}\\\\\rho_1 \dfrac{1}{{d_1}^2}=\rho_2 \dfrac{1}{{d_2}^2}\\\\(\dfrac{d_2}{d_1})^2=\dfrac{\rho_1}{\rho_2}\\\\\dfrac{d_2}{d_1}=\sqrt{\dfrac{\rho_1}{\rho_2}}\\\\\dfrac{d_2}{d_1}=\sqrt{\dfrac{2.65\times 10^{-8}}{1.72\times 10^{-8}}}\\\\=1.24[/tex]

So, the required ratio of the diameter of Aluminum to Copper wire is 1.24.

Answer:

D.) Do clones have the same rights as humans?

Explanation:

This is the only option choice that relates to ethics, more specifically, bioethics. The rest of the answer choices look either seek for scientific explanations on cloning itself or the implications of clothing. Only answer choice D relates to ethics.

Answer:

I am serious about that

Explanation:

.......

(A) The pressure will be greater than 10% overpressure limit.

(B) The final pressure will be "582.915 kPa".

Given:

Volume,

Initial pressure,

Initial temperature,

            [tex]= 259 \ K[/tex]

Final temperature,

(B)

Number of moles,

→ [tex]n = (\frac{P_o V}{RT_o} )[/tex]

then,

The final absolute pressure,

→ [tex]P = \frac{nRT}{V}[/tex]

      [tex]= (\frac{P_o V}{RT_o} )(\frac{RT}{V} )[/tex]

      [tex]=(\frac{T}{T_o} )P_o[/tex]

      [tex]= (\frac{305}{259} )\times 495[/tex]

      [tex]= 582.915 \ kPa[/tex]

Thus the above approach is correct.

Learn more:

https://brainly.com/question/13033911

Answer:

B

Explanation:

P1/P1 = 40/20

=2

Answer:

    wo = 18.75 rev / s

Explanation:

This is an exercise in endowment kinematics, it indicates that the final angular velocity is w_f = 109 rad / s, the time to reach this velocity is t = 1.87 s and the deceleration a = 4.7 rad / s²

         w_f = w₀ - a t

         w₀ = w_f + a t

         w₀ = 109 + 4.7 1.87

         w₀ = 117.8 rad / s

let's reduce to revolutions / s

         w₀ = 117.8 rad / s (1 rev / 2pi rad)

         w₀ = 18.75 rev / s

Answer:  

Hence the answer is E inside [tex]= KQr_{1} /R^{3}[/tex].

Explanation:  

E inside [tex]= KQr_{1} /R^{3}[/tex]  

so if r1 will be the same then  

E  [tex]\begin{bmatrix}Blank Equation\end{bmatrix}[/tex] proportional to 1/R3  

so if R become 2R  

E becomes 1/8 of the initial electric field.

Answer:

The electric field is E/8.

Explanation:

The electric field due to a solid sphere of uniform charge density inside it is given by

[tex]E =\frac{\rho r}{3}[/tex]

where, [tex]\rho[/tex] is the volume charge density and r is the distance from the center.

For case I:

[tex]\rho = \frac{Q}{\frac{4}{3}\pi R^3}[/tex]

So, electric field at a distance r is

[tex]E = \frac { 3 Q r}{3\times 4\pi R^3}\\\\E = \frac{Q r}{4\pi R^3}[/tex]

Case II:

[tex]\rho = \frac{Q}{\frac{4}{3}\pi 8R^3}[/tex]

So, the electric field at a distance r is

[tex]E' = \frac { 3 Q r}{3\times 32\pi R^3}\\\\E' = \frac{Q r}{8\times 4\pi R^3}\\\\E' = \frac{E}{8}[/tex]

The comparison of the speeds and kinetic energy of the identical balls are as follows

The speed and the kinetic energy of the first and fourth ball are equal, while the speed and kinetic energy of the second and third balls are equal

The reason for the above comparison results areas follows;

Known parameters;

First ball is thrown straight up

Second ball is thrown 30° above the horizontal

Third ball it thrown 30° below the horizontal

The fourth ball is thrown straight down

Unknown:

Comparison of the speed and kinetic energy of the four balls

Method:

The kinetic energy, K.E. = (1/2) × m × v²

The velocity of the ball, v = u × sin(θ)

Where;

u = The initial velocity of the ball

θ = The reference angle

θ = 90°

∴ [tex]v_y[/tex] = u

The final velocity of the ball as it strikes the ground is v₂ = u² + 2gh

Where;

h = The height of the cliff

∴ Kinetic energy of first ball, K.E.₁ = (1/2) × m × (u₁² + 2gh)²

K.E. = (1/2) × m × ((u×sin30)² + 2·g·h)² = K.E. = (1/2) × m × ((0.5·u)² + 2·g·h)²

Kinetic energy  K.E.₂ = (1/2) × m × ((0.5·u₂)² + 2·g·h)²

K.E. = (1/2) × m × ((u×sin30)² + 2·g·h)² = K.E. = (1/2) × m × ((0.5·u)² + 2·g·h)²

Kinetic energy K.E.₃ = (1/2) × m × ((0.5·u₃)² + 2·g·h)²

Kinetic energy K.E.₄ = (1/2) × m × (u₄² + 2gh)²

Therefore, as the ball strike the ground, the speed and the kinetic energy of the first and fourth ball are equal, while the speed and kinetic energy of the second and third balls are equal

u₁ = u₄, K.E₁ = K.E.₄, u₂ = u₃, K.E₂ = K.E.₃

Learn more about object kinetic energy of objects in free fall here;

https://brainly.com/question/14872097