Reverberation, in psychoacoustics and acoustics, is a persistence of sound after the sound is produced
Explanation:
I think it is right hope its helps
Answer:
D. A single sound undergoes several reflections due to multiple reflecting surfaces.
Explanation:
Sometimes, the source of a sound is surrounded by multiple reflecting surfaces. The waves traveling from the source strike these different surfaces, causing multiple reflections. For example, a single clap of thunder reflects on several clouds and the earth's surface, causing you to hear a rolling rumble instead of a single sound.
sort out electric current as fundamental or derived unit.
Answer:
electric current is derived unit.
Explanation:
According to the definition of electric current, it appears to be a derived quantity. Charge on the other hand seems more fundamental than electric current.
solve two questions under inclined plane using Newton 2nd law
Explanation:
If the mass of the inclined plane is large enough, could N ever be equal to mgcosθ. Reasons?
So far I've come up with: mgcosθ−N=ma meaning if N were to equal mgcosθ, ma=0. Since the surfaces are frictionless and since N is acting on the inclined plane too(it'll have a horizontal component), this isn't possible. Am I right? Where am I going wrong?
25 POINTS 25 POINTS 25 POINTS 25 POINTS 25 POINTS
Assignment: Build an Electromagnet and a Motor Investigation
Electromagnet
1. How many paper clips did the wire wrapped around the nail just a few times pick up?
2. Which electromagnet design was most successful in picking up the most paper clips?
3. Would wrapping the wire more times around the nail make the electromagnet stronger or weaker?
4. What do you think the result would be if an iron nail that was much thicker was used?
5. What do you think would happen if a wooden stick was chosen as the core instead of the iron nail?
Motor
1. Describe the components that are necessary to make a motor run? What do they each provide? (example: battery provides voltage source)
2. Describe how the homemade motor makes mechanical energy from electrical energy.
3. What are three appliances in your house that use a motor that turns electrical energy into mechanical energy?
All the paper clips, coiled wire with nail and wrapping or coiling the wire more times are the correct answers.
All the paper clips will the wire wrapped around the nail just a few times pick up. A coiled wire with nail in the center is the electromagnet design which is most successful in picking up the most paper clips. Wrapping or coiling the wire more times around the nail make the electromagnet more stronger.
If an iron nail that was much thicker was used, it will make the magnet stronger that leads to strong electromagnetism. There are three main parts that is necessary for making a motor i.e. a rotor, a stator and a commutator.
These three parts use the attractive and repulsive forces of electromagnetism, causing the motor to spin continually as long as it receives a steady flow of electric current. Motors comprise of loops of wire in a magnetic field.
When current is passed through the loops, the magnetic field exerts a torque on the loops, which rotates the shaft that leads to the generation of electricity. Water pump, mixer and washing machine are three appliances in your house that use a motor that turns electrical energy into mechanical energy.
https://brainly.com/question/24278437
If if two non zero vectors are acted on a body in what condition the resultant vector on the body will be zero ?
Answer:
Yes, when the 2 vectors are same in magnitude and direction. Yes, when the 2 vectors are same in magnitude but opposite in sense. Yes, when the 2 vectors are same in magnitude making an angle of 2π3 with each other.
Explanation:
Hope it helps you
The condition under which the resultant of two vectors will be zero is that the vectors must be in equilibrium.
The conditions under which the resultant of two non zero vectors acting on a body must be zero.
the two vectors must be in equilibriumthe two vectors are forces, then they must lie on the same plane and their line of action must pass through a common point.[tex]\bar R = \bar R_A + \bar R_B = 0[/tex]
Thus, the condition under which the resultant of two vectors will be zero is that the vectors must be in equilibrium.
Learn more here: https://brainly.com/question/17574217
Để có 100 lít nước ở 370C. Người ta pha nước đang sôi với nước ở 150C. Tính thể tích nước mỗi loại cần dùng.Biết khối lượng riêng của nước là 1000kg/m3
Answer:
nước sôi: 440/17 l
nước 15°C:1260/17 l
Trong thí nghiệm về sự khúc xạ ánh sáng, một học sinh ghi lại trên tấm bìa ba đường truyền của ánh sáng như hình bên nhưng quên không ghi chiều truyền.
Tia khúc xạ là
Answer:
I R 2
Explanat
difference Between Newton's first and third law
Explanation:
In the first law, an object will not change its motion unless a force acts on it. In the second law, the force on an object is equal to its mass times its acceleration. In the third law, when two objects interact, they apply forces to each other of equal magnitude and opposite direction.6 days ago
Newton first law state that anything in motion or on rest will continue to do so until an external force is applied on it
Newton 3rd law stare that every action have equal and opposite reaction
The velocity ratio of a pulley system is 4. What does it means
Answer:
Velocity ratio = distance travelled by effort / distance travelled by load. Which is equal to effort arm / load arm. When velocity ratio (VR) is 4, the effort arm is greater than load arm.
Please help! Will mark Brainliest
Explanation:
I think it is the third image as marked in the diagram I kept above because as we know first class levers have the fulcrum between the force and the load
can anyone help me with this one
Answer:
c) sin c /sin d
because light is moving from denser to shallower medium
b) refraction of light
Explanation:
J.J. Thomson theorized that, if an atom had all of its negatively charged
electrons removed, the remaining material would be
A. neutral
B. negatively charged
C. positively charged
D. magnetic
Answer:
C. Positively charged
Explanation:
The plum pudding model of the atom proposes by J. J. Thomson consisted of electrons which lay embedded as the raisins within a dough or soup that was positively charged. The electron was discovered by J. J. Thomson in 1897 through cathode ray tube experiments.
Based on the plum pudding model, if all the negatively charge electrons contained in an atom are removed, the material remaining will be the positively charged soup
why does the satellite not fall while revolving the earth
Answer:
Satellites don't fall from the sky because they are orbiting Earth. Even when satellites are thousands of miles away, Earth's gravity still tugs on them. Gravity--combined with the satellite's momentum from its launch into space--cause the satellite go into orbit above Earth, instead of falling back down to the ground.
define electrical resistance in a metal conductor
Answer:
Resistance is defined as the property of a conductor to resist the flow of charges through it. The resistance of conductor is numerically given as the ratio of potential difference across its length to the current flowing through it.
Explanation:
A) Give 3 examples of forces that are pulls and 3 examples that are pushes. b) For each example you give, state an approximate value for the size of the force.
Answer:
Explanation:
Force is defined as the push or pull which changes or tries to change the position, state of motion and the shape of the object.
(A) The examples of push are:
To push a chair on the floor, to push the car when it is stopped due to some problem, to push book on the table.
The examples of pull are :
To pull a chair towards you, to pull a string in a game of top, to pull the string in a gym.
(B) To push a chair or a book, the force required is small as compared to the to push a car.
To pull a chair or the string of top is less than the force to pull the string in gym.
What unit is used to measure the period of a wave?
A. Seconds
B. Meters
C. Hertz
D. Meters/second
Answer:
D. Meters/Seconds
Explanation:
The time period of a wave is measured in seconds.
A typical wave involves both time and distance. Consider a sound wave, which is basically a periodic modulation of the local air pressure. We "hear" the sound because our ears respond to the variations of pressure.
The most common metric of a sound wave is frequency. This is the rate at which the change in pressure occurs, and is measured in cycles per second, formally known as "hertz". The period is the inverse of frequency andl has the units of seconds per cycle, commonly stated simply as seconds.
Using your Periodic Table, which of the elements below is most likely to be a solid at room temperature?
A.) potassium, B.) Hydrogen, C.) Neon, D.) Chlorine
The answer is definitely Potassium
An oscillator completes 240 cycles in 5.2 minutes.
Calculate its period (in seconds) and frequency (in Hz).
Answer:
I. Period = 1.3 seconds
II. Frequency = 0.769 Hertz
Explanation:
Given the following data;
Number of oscillation = 240 cycles
Time = 5.2 minutes.
Conversion:
1 minute = 60 seconds
5.2 minutes = X seconds
X = 60 * 5.2
X = 312 seconds
To find the following;
I. Period
Mathematically, the number of oscillation of a pendulum is given by the formula;
[tex] Number \; of \; oscillation = \frac {Time}{Period} [/tex]
Making period the subject of formula, we have;
[tex] Period = \frac {Time}{Number \; of \; oscillation} [/tex]
Substituting into the formula, we have;
[tex] Period = \frac {312}{240} [/tex]
Period = 1.3 seconds
II. Frequency
[tex] Frequency = \frac {1}{Period} [/tex]
Substituting the values into the formula, we have;
[tex] Frequency = \frac {1}{1.3} [/tex]
Frequency = 0.769 Hertz
You are pushing a cart at the grocery store. The cart is speeding up. a) When your friend drops a 50 pound bag of dog food into the cart you are pushing, what would happen to the acceleration of the cart? Explain your answer using Newton's Second Law.
Answer:
The acceleration will decrease/reduce
Explanation:
Newton in his second law of motion states that the acceleration of an object is dependent on the force and mass applied on the object. Using the equation as follows:
F = m × a
Where;
F = force (N)
m = mass (kg)
a = acceleration (m/s²)
Acceleration (a) is directly proportional to the force (F) applied but inversely proportional to the mass (m).
According to this question, a friend drops 50 pounds of dog food into a cart being pushed with speed. This means that the mass/weight of the cart was increased. Since the acceleration is inversely proportional to the mass of an object, this means that the acceleration of the cart will DECREASE/REDUCE as the mass increases.
Can I answer my own question
Answer:
Well okay do it what's your question ?
Answer:
yes
Explanation:
Multi-part question If a galaxy moving away from the Earth has a speed of 1000 km/s and emits 656 nm light characteristic of hydrogen (the most common element in the universe). What wavelength would we observe on the Earth
Answer:
658.2 nm
Explanation:
Since the galaxy is moving at relavitistic speed, we use the equation for relativistic Doppler shift of light.
So, the wavelength of light observed on the Earth is λ
λ = λ'([tex]\sqrt{\frac{ 1 + \frac{v}{c} }{1 - \frac{v}{c} } }[/tex])
where λ' = wavelength of light emitted by galaxy = 656 nm, v = speed of galaxy = 1000 km/s (positive since the galaxy is moving away from the Earth) and c = speed of light = 300000 km/s
So, substituting the values of the variables into the equation, we have
λ = λ'(√[{1 + (v/c)}/(1 - (v/c)]
λ = 656 nm(√[{1 + (1000 km/s/300000 km/s)}/(1 - (1000 km/s/300000 km/s)]
λ = 656 nm(√[{1 + 1/300}/(1 - 1/300]
λ = 656 nm(√[{(300 + 1)/300}/{(300 - 1)/300}]
λ = 656 nm(√[{(301)/300}/{(299)/300}]
λ = 656 nm(√[301/299])
λ = 656 nm(√1.0067)
λ = 656 nm × 1.0033
λ = 658.19 nm
λ ≅ 658.2 nm
So, the wavelength observed on Earth is 658.2 nm
True or False. A compound is formed when two or more elements are combined to make a new substance with
its own properties
True
Fase
standard unit definition
Answer:
Standard units are the units we usually use to measure the weight, length or capacity of objects.
Answer:
THE SYSTEM OF UNITS WHICH IS AGREED BY THE INTERNATIONAL CONVENTION OF SCIENTISTS HELD IN FRANCE IN 1960 IS CALLED SI SYSTEM.
please help me with this I really need help
Answer:
Ask with your Science teacher
Explanation:
i do not know the ans
Q010) A well in which the water rises on its own to a level above its aquifer Group of answer choices is the result of pressure within a confined aquifer that creates a potentiometric surface. is called an ordinary well. always pushes water higher than the ground surface. cannot be used for commercial or public use, as the water is under too much pressure.
Answer:
The result of pressure within a confined aquifer that creates a potentiometric surface
Explanation:
There are conditions under the Earth's surface, where porous rock layers are tilted and also have a confining, less porous, rock layer about the their boundary, forming a confined aquifer. The existing pressure in the aquifer is therefore confined within the water and the porous rock layer, such that drilling into the pressurized aquifer leads to the water rising under the pressure existing in the aquifer, to a potentiometric surface which is above the actual underground level of the aquifer
Two manned satellites approach one another at a relative velocity of v=0.190 m/s, intending to dock. The first has a mass of m1=4.00×103 kg and the second a mass of m2=7.50×103 kg. If the two satellites collide elastically rather than dock, what is their final relative velocity?
Answer:
Their final relative velocity is 0.190 m/s
Explanation:
The relative velocity of the satellites, v = 0.190 m/s
The mass of the first satellite, m₁ = 4.00 × 10³ kg
The mass of the second satellite, m₂ = 7.50 × 10³ kg
Given that the satellites have elastic collision, we have;
[tex]v_2 = \dfrac{2 \cdot m_1}{m_1 + m_2} \cdot u_1 - \dfrac{m_1 - m_2}{m_1 + m_2} \cdot u_2[/tex]
[tex]v_2 = \dfrac{ m_1 - m_2}{m_1 + m_2} \cdot u_1 + \dfrac{2 \cdot m_2}{m_1 + m_2} \cdot u_2[/tex]
Given that the initial velocities are equal in magnitude, we have;
u₁ = u₂ = v/2
u₁ = u₂ = 0.190 m/s/2 = 0.095 m/s
v₁ and v₂ = The final velocities of the satellites
We get;
[tex]v_1 = \dfrac{2 \times 4.0 \times 10^3}{4.0 \times 10^3 + 7.50 \times 10^3} \times 0.095 - \dfrac{4.0 \times 10^3- 7.50\times 10^3}{4.0 \times 10^3+ 7.50\times 10^3} \times 0.095 = 0.095[/tex]
[tex]v_2 = \dfrac{ 4.0 \times 10^3 - 7.50\times 10^3}{4.0 \times 10^3 + 7.50 \times 10^3} \times 0.095 + \dfrac{2 \times 7.50\times 10^3}{4.0 \times 10^3+ 7.50\times 10^3} \times 0.095 = 0.095[/tex]
The final relative velocity of the satellite, [tex]v_f[/tex] = v₁ + v₂
∴ [tex]v_f[/tex] = 0.095 + 0.095 = 0.190
The final relative velocity of the satellite, [tex]v_f[/tex] = 0.190 m/s
what weight is recorded by a scale when it is placed inside a lift which is in free fall? Enplain.
Answer:
Explanation:
There is no pressure of your feet on the scales, and no pressure of the floor on the scales, so the scales will read zero*. Hence, your weight, in a freely falling lift is zero
Pls help me solve these two questions!!! Tq
Answer:
Part A would be 80 Joules and Part B would be 20 meters.
Explanation:
For Part A:
The first step is to convert the mass to SI units.
400 g = 0.4 kg
Next, we need to know that the law of conservation of energy states that the total energy of an isolated system is conserved. In this case, it means that the total energy at the bottom, where kinetic energy is greatest, will be equal to the total energy at the top, where gravitational potential energy is greatest.
Max Gravitational Potential Energy = Max Kinetic Energy
Max Gravitational Potential Energy = [tex]\frac{1}{2} mv^{2}[/tex]
Max Gravitational Potential Energy = [tex](\frac{1}{2} )(.4kg)(20m/s)^2[/tex] = 80[tex]J[/tex]
For Part B:
We need to once again set gravitational potential energy to kinetic energy, only this time we use the GPE equation and solve for height. We already solved for the kinetic energy so we just plug everything in and solve.
[tex]mgh = \frac{1}{2} mv^{2}[/tex]
[tex](.4kg)(10m/s^{2} )h = 80J\\h = 20m[/tex]
state and prove Newton's second law of motion
Answer:
HOPE IT HELP YOU A LOT :)
I prove it also .
Answer:
Newtons Second law of motion states that"The rate of change of momentum is directly proportional to the force applied"
The coefficient of kinetic friction between an 100-kg desk and the wood floor is 0.4. What force (in Newtons) must be applied to move the desk at a constant speed? help now
Assuming the applied force is exerted parallel to the floor, by Newton's second law both the net vertical and net horizontal forces would be zero:
∑ F (horizontal) = p - f = 0 … … … because the desk is pushed at a constant speed
∑ F (vertical) = n - mg = 0 … … … because the desk doesn't move up or down
where p is the magnitude of the applied force, f is the mag. of kinetic friction, n is the mag. of the normal force due to contact between the floor and desk, and mg is the weight of the desk. We have
n = mg = (100 kg) g = 980 N
and the mag. of friction is proportional to n according to
f = 0.4 n = 392 N
Then the applied force p has magnitude
p = f = 392 N
Two children (each having a mass of 60 kg) are standing on the edge a merry-go-round (mass of 140 kg) as it spins with an angular velocity of 0.75 rad/s. The two children jump off the merry-go-round. What is the angular velocity of the merry-go-round after the children have jumped off
Answer:
The angular velocity after the children jump off is approximately 1.4 rad/s
Explanation:
The given parameters are;
The masses of each child, m₁, and m₂ = 60 kg
The mass of the merry-go-round, m₃ = 140 kg
The initial angular velocity, [tex]\omega_i[/tex] = 0.75 rad/s
The angular velocity after the children jump off = [tex]\omega_f[/tex]
According to the principle of conservation of angular momentum
The angular momentum = I × ω
The moment of inertia, I = m × R²
The total initial angular momentum = [tex]I_i \times \omega_i = m_i \times R^2 \times \omega_i[/tex]
The total angular momentum after the children jump off = [tex]I_f \times \omega_f = m_f \times R^2 \times \omega_f[/tex]
The initial mass, [tex]m_i[/tex] = m₁ + m₂ + m₃ = 60 kg + 60 kg + 140 kg = 260 kg
The final mass, [tex]m_f[/tex] = m₃ = 140 kg
According to the principle of conservation of linear momentum, we have;
[tex]I_i \times \omega_i[/tex] = [tex]I_f \times \omega_f[/tex]
Therefore;
260 kg × R² × 0.75 rad/s = 140 kg × R² × [tex]\omega_f[/tex]
∴ [tex]\omega _f[/tex] = (260 kg × R² × 0.75 rad/s)/(140 kg × R²) = 1.39285714 rad/s. ≈ 1.4 rad/s
The angular velocity after the children jump off, [tex]\omega _f[/tex] ≈ 1.4 rad/s.
