***WILL GIVE BRAINLIEST***
A triangular garden is to be split so that the angle at vertex B is bisected. This diagram was supplied by the landscape architect, but you do not have a way to measure the angles at B. You do have the given side lengths, so what is the length of side AD that will allow the angle at B to be bisected?

A.
5 m
B.
4 m
C.
2 m
D.
3 m

Answer:

A) Histogram

Step-by-step explanation:

A) The first step would be to look at the purpose and use for each type of plotting method;

Dot Plot: Used to represent the distribution of data (for ex; #of Strawberries, Blueberries, and Raspberries.

Histogram: A histogram is used to summarize discrete or continuous data. In other words, it provides a visual interpretation of numerical data by showing the number of data points that fall within a specified range of values

Box Plot: Summerizes a set of data measured on an interval scale.

Best choice: Histogram- The reason why a histogram is the best representation of the student quartiles is because a histogram is used to summarize discrete or continuous data, and the given data is discrete

B)

To create your histogram you first have to create a frequency table like the one below;

On the vertical axis, place frequencies. Label this axis "Frequency".

On the horizontal axis, place the lower value of each interval. Label this axis with the type of data shown (Score, etc.)

Draw a bar extending from the lower value of each interval to the lower value of the next interval. The height of each bar should be equal to the frequency of its corresponding interval.

That's how it's done!

Answer:

this is only for part a: a histogram

Step-by-step explanation: a histogram is like a bar graph and instead of putting dots or X's just graph it its much easier

Answer:

B

Step-by-step explanation:

the radii have to be cubed cause a volume is cubed

3^3:5^3

27:125

I hope this helps and sorry if it's wrong

Answer:

Step-by-step explanation:

Area of sector:

Substitute the values and find the area:

Answer:

1. numerator;

2. denominator

Step-by-step explanation:

For a one-way within-subjects ANOVA, the mean difference attributed to the manipulation is in the NUMERATOR, and the mean difference attributed to individual differences is in the DENOMINATOR of the test statistic.

Answer:

a= 1

b= 3

c= 2

d= 2

e= 6

f= 8. These are the answers for the question. Love from Gauthmath

The standard exponential function is expressed as y =ab^x. The values of the variables are: b = c = 3, a = 1, d = 2,e = 6, f = 9

The standard exponential function is expressed as:

y =ab^x

wherex is the exponent

a is the base

According to the question, we are to fill the given table based on the given exponential functions.

If the exponential function is 2^x

a = 2^0 = 1

d = 2^1 = 2

If the exponential function is 3*2^x

b = 3* 2^0 = 3

e = 3 * 2^1 = 6

If the exponential function is 2^3x

c = 3^2(0) = 3^1 = 3

f = 3^2(1) = 3^2 = 9

Learn more on exponential function here: https://brainly.com/question/2456547

#SPJ5

Answer:

Answer:

y(x) = 2x+3

Step-by-step explanation:

the rule is y(x) = 2x+3

Answer:

The height of the tree is is 60m

Step-by-step explanation:

Let's answer a, as it is the only complete question.

We know that the angle of elevation of the top of a tree observed from a point 60m away, is 45°.

We can model this with a triangle rectangle, a sketch of it can be seen below (assuming that you are looking it from the ground).

You can see that the adjacent cathetus to the 45° angle is equal to 60m

And the opposite cathetus is the measure we want to find.

Now you can remember the trigonometric relation:

tan(a) = (opposite cathetus)/(adjacent cathetus).

So to find the height of the tree we need to solve:

tan(45°) = H/60m

This is just:

tan(45°)*60m = H  =60m

The height of the tree is is 60m

Answer:

8

Step-by-step explanation:

(16^3/2)^1/2

We know a^b^c = a^(b*c)

16 ^(3/2*1/2)

16 ^3/4

Rewriting 16 as 2^4

2^4^3/4

2^(4*3/4)

2^3

8

Answer:

yes because the graph passes the vertical line test

Answer:

c

Step-by-step explanation:

Answer:

C. y - 7 < 2x - 6

Step-by-step explanation:

A. y + 7 < 2x + 6

0 + 7 < 2(0) + 6

7 < 0 + 6

7 < 6 —————- FALSE

B. y + 7 < 2x - 6

0 + 7 < 2(0) - 6

7 < 0 - 6

7 < -6 —————FALSE

C. y - 7 < 2x - 6

0 - 7 < 2(0) - 6

-7 < 0 - 6

-7 < -6 —————TRUE

D. y - 6 < 2x - 7

0 - 6 < 2(0) - 7

-6 < 0 - 7

-6 < -7 ————— FALSE

Answer:

x <9

Step-by-step explanation:

6(2x-11)<-3+5x

Distribute

12x -66 < -3+5x

Subtract 5x from each side

12x-5x -66 < -3+5x-5x

7x -66< -3

Add 66 to each side

7x-66+66<-3+66

7x<63

Divide by 7

7x/7 <63/7

x <9

9514 1404 393

Answer:

  a) 11 cm

  b) 20 cm

Step-by-step explanation:

A square has four equal-length sides, so the perimeter is 4 times the side length. Then the side length is 1/4 of the perimeter.

  a) s = (1/4)(44 cm) = 11 cm

  b) s = (1/4)(80 cm) = 20 cm

Answer:

43,200 minutes in 1months or 30 days

There are 43200 minutes in one month.

The basic explanation of multiplication is adding a number, with respect to another number, repeatedly.

Given that, How many minutes are in a 30-day month,

We have, 60 minutes in 1 hour

And, 24 hours in 1 day,

Then, number of minutes in 1 day = 60 × 24 = 1440 minutes

Therefore, in 1 month = 1440 × 30 = 43200 minutes

Hence, there are 43200 minutes in one month.

Learn more about multiplication, click;

https://brainly.com/question/5992872

#SPJ2

Answer:

5) 4а²+8ас=4а(а+2с)

6) 3m²-6mn=3m(m-2n)

7) ab-ac+yb-yc=a(b-c)+y(b-c)=(a+y)(b-c)

8) ab+ac+xb+c=b(a+x)+c(a+1)

Answer:

Answer is 13x⁴ - x³ - 9x²( the last option)

Step-by-step explanation:

f(x) = 8x⁴ - x³ - 4x²

g(x) = -5x⁴ + 5x²

so,

f(x) - g(x)

=(substituting the value)

= (8x⁴ - x³ - 4x²) - (-5x⁴ + 5x²)

= 8x⁴ - x³ - 4x² + 5x⁴ - 5x²

= 8x⁴ + 5x⁴ - x³ - 4x² - 5x²

= 13x⁴ - x³ - 9x²

Answer:

The 4th option would be correct.

Step-by-step explanation:

No complex calculations are needed. Just pay attention to what the problem is asking for. Notice that f(x) is positive while g(x) is negative. So instead of adding, you're subtracting.

Now look at the last coefficients in each function. Notice that they're the same term, since both of their variables are x^2. Since we're subtracting, that 5x^2 in function g is actually going to be negative. This is why the answer would be the last option, since it's the only one that shows that -4x^2 and -5x^2 is being combined.

Also, at the start, I said no complex calculations are needed. This is because the problem didn't say 'Show your work' or something along those lines. Only do it if it asks, or if your teacher does.

Answer:

Width = 4 cm

Length = 8 cm

Step-by-step explanation:

Hi there!

Let [tex]l[/tex] be equal to the length of the rectangle.

Let [tex]w[/tex] be equal to the width of the rectangle.

1) Determine equations to find the length and width

We're given that the length is two times the length of the width:

[tex]l=2w[/tex]

We're also given that the area of the rectangle is 32 cm². Recall that the area of a rectangle is [tex]A=lw[/tex]:

[tex]A=lw\\32=lw[/tex]

Now, we have our two equations:

[tex]\displaystyle \left \{ {{l=2w} \atop {32=lw}} \right.[/tex]

2) Solve for the width using substitution

[tex]\displaystyle \left \{ {{l=2w} \atop {32=lw}} \right.[/tex]

Replace [tex]l[/tex] in the second equation with [tex]2w[/tex] from the first equation:

[tex]32=(2w)w\\32=2w^2[/tex]

Divide both sides by 2 to isolate w²:

[tex]16=w^2[/tex]

Take the square root of both sides to isolate w:

[tex]\pm4=w[/tex]

Because width cannot be negative, w=4. Therefore, the width of the rectangle is 4 cm.

3) Solve for the length

[tex]\displaystyle \left \{ {{l=2w} \atop {32=lw}} \right.[/tex]

Now, that we have the width (4 cm), we can solve for the length by plugging it back into one of the equations. Either of the equations work, but we can use the first:

[tex]l=2w\\l=2(4)\\l=8[/tex]

Therefore, the length of the rectangle is 8 cm.

3) Draw the rectangle

We can use what you had before as a foundation. You drew a rectangle with width 4 cm and length 7 cm. To draw the correct rectangle, add another row on top to make it 4 cm by 8 cm.

I hope this helps!

90

6+6=12

12+8=20

20+10=30

30+12=42

42+14=56

56+16+18=90

1+1+2+2+3+3+4+4+5+5+6+6+7+7+8+8+9+9+0+0 would equal to 90 if you break it down.

Hope this helps!

Have a great day :)

Answer:

the second option

Step-by-step explanation:

SAS is side angle side. so, we need 2 sides and the enclosed angle.

since G is the transformed M, and GL is the transformed side TM, that also means L correlates to T and S to D.

for SAS we need both sides of the angles M and G.

TD and SL are not satisfying this condition.

only MD and SG do.

Answer:

u=1

v = 10

Step-by-step explanation:

For the triangles to be congruent

IG = PR

50 = u+49

50 - 49 = u

1 = u

GH = RQ

v+6 = 16

v = 16-6

v = 10

Answer:

what can i help u with

Step-by-step explanation:

The graph of x = |y| is as shown in the figure.

When we draw a vertical line, it intersects the graph at two points.

This means for the same value of x , we have two values of y.

Or in other words, for the same pre image, we have two images.

Hence it is not a function.

But for every value of x, we do have a value of y, hence it is a relation.

x = |y| is a relation but it is not a function

Answer:

:B

Step-by-step explanation:

hope that can help

The amount from tax is $97.16 while the amount from sales is $1156.52

Tax is a compulsory sum levied on the sales of goods and services

Taxes increases the price of a good

The price of J.W.'s pottery would be 7.75% higher as a result of the tax

Amount of tax collected = percentage of sales tax  x total of cash

0.0775 x  $1253.68 = $97.16

Amount from the sale = total cash - taxes

$1253.68 - $97.16 = $1156.52

For more information on how to determine sales tax, check : https://brainly.com/question/19715580?referrer=searchResults

Bill before tax = $32

Tax = 10/100×32

= $3.2

Tip = 15/100×32

= $4.8

Total cost = 32 + 3.2 + 4.8

= $40

Answered by Gauthmath must click thanks and mark brainliest

Answer:

Step-by-step explanation:

Mean of the data = sum of the data / number of frequencies:

Correct choice is d

Answer:

[tex]2.5s[/tex]

Step-by-step explanation:

We are given a function which tells us at what time the rock is at a certain height. What should be the height of this function when the rock hits the ground? 0, because it has no height, it's on the ground!

So let's plug in 0, and see what value we get for the time.

[tex]0 = 16t^2-100\\100 = 16t^2\\\frac{100}{16} = t^2\\[/tex]

To solve for t we need to take the square root of both sides.

[tex]t = \sqrt{\frac{100}{16} } = \frac{10}{4} = 2.5s[/tex]

Answer:

It is the last option.

Jordan needs 1 1/2 cups of diced chicken for 3 salads.

To make this easy for you.

1. start on the x axis which is number of salads.

2. Go to the number 3 (of the x axis which is the number of salads)

3. Find your way up to the point marked.

4. see what is your number in the y-axis (in this case it is 1 1/2.

Step-by-step explanation:

I hope it helps!

Answer:

I believe it is 55°.

I can't remember the exact steps for this tho.

I hope it is right! good luck!

Answer:

Side = 2 * height / sqr root 3

Side = 2 * 6 * sqr root 3 / sqr root 3

Side = 12

Step-by-step explanation:

9514 1404 393

Answer:

  14.1 years

Step-by-step explanation:

Use the compound interest formula and solve for t. Logarithms are involved.

  A = P(1 +r/n)^(nt)

amount when P is invested for t years at annual rate r compounded n times per year.

Using the given values, we have ...

  13060 = 8800(1 +0.028/365)^(365t)

  13060/8800 = (1 +0.028/365)^(365t) . . . . divide by P=8800

Now we take logarithms to make this a linear equation.

  log(13060/8800) = (365t)log(1 +0.028/365)

Dividing by the coefficient of t gives us ...

  t = log(13060/8800)/(365·log(1 +0.028/365)) ≈ 0.171461/0.0121598

  t ≈ 14.1

It would take about 14.1 years for the value to reach $13,060.