answer bhejo please please please​

Answer:

6.08

Explanation:

Given that,

Current, I = 0.8 A

Time, t = 76 h

We need to find the Ah rating of a battery. It can be calculated by taking the product of current and time. So,

Ah = (0.8)(76)

= 6.08 Ah

So, the Ah rating of the battery is 6.08.

Answer:

Therefore, the moment of inertia is:

[tex]I=0.37 \: kgm^{2} [/tex]

Explanation:

The period of an oscillation equation of a solid pendulum is given by:

[tex]T=2\pi \sqrt{\frac{I}{Mgd}}[/tex] (1)

Where:

Let's solve the equation (1) for I

[tex]T=2\pi \sqrt{\frac{I}{Mgd}}[/tex]

[tex]I=Mgd(\frac{T}{2\pi})^{2}[/tex]

Before find I, we need to remember that

[tex]T = \frac{1}{f}=\frac{1}{0.680}=1.47\: s[/tex]

Now, the moment of inertia will be:

[tex]I=2*9.81*0.340(\frac{1.47}{2\pi})^{2}[/tex]  

Therefore, the moment of inertia is:

[tex]I=0.37 \: kgm^{2} [/tex]

I hope it helps you!

Answer:

The vibrating length of the air column is greater than the actual length of the organ pipe

Answer:

The energy stored is 1.4 x 10^-9 J.

Explanation:

Side of square, L = 10 cm = 0.1 m

Distance, d = 2 mm = 0.002 m

Electric field, E = 4000 V/m

The energy stored in the capacitor is

[tex]U = 0.5 C V^2[/tex]

The capacitance is given by

[tex]C = \frac{\varepsilon o A}{d}\\\\So \\\\U = 0.5\frac{\varepsilon o A}{d}\times E^2 d^2\\\\U = 0.5\times 8.85\times 10^{-12}\times 0.1\times 0.1\times 4000\times 4000\times 0.002\\\\U = 1.4\times10^{-9} J[/tex]

Answer:

2.3  ×  [tex]10^{-1}[/tex]  

Explanation:

1 kg = 1000 g.

0.00023 kg x 1000 g = 0.23 grams

Answer:

0.23×10⁴

Explanation:

kilogram to gram ÷ 1000

0.00023kg ÷ 1000

=0.23g

scientific notation=0.23×10⁴

Answer:

D) Q = 80 C

Explanation:

Given;

current flowing in the light bulb, I = 2A

time of current flow, t = 40,000 ms = 40,000 x 10⁻³ s = 40 s

The quantity of the charge is calculated as;

Q = It

where;

Q is the quantity of the charge (Coulombs)

Q = (2 ) x (40)

Q = 80 C

Therefore, the quantity of charge flowing in the circuit is 80 C

D) Q = 80 C

Answer:

The distance is 22.45 cm.

Explanation:

Height of cylinder, H = 14 cm

depth of hole, h = 5 cm

The distance of landing of stream from the base of cylinder is

[tex]R = 2\sqrt{H(H-h)}\\\\R = 2\sqrt{14(14-5)}\\\\R = 22.45 cm[/tex]

Answer:

the required angle is 0.0834879⁰

Explanation:

Given  the data in the question;

slit separation; d = 1.75 mm = 1.75 × 10⁻³ m

wavelength λ₁ = 425 nm = 425 × 10⁻⁹ m

wavelength λ₂ 510 nm = 510 × 10⁻⁹ m

Now, we know that, the angle at which a particular bright fringe occurs on either side of the central bright fringe will be;

tanθ = [tex]y_m[/tex] / D = mλ/d

since they both coincides;

tanθ₁ = tanθ₂

m₁λ₁/d = m₂λ₂/d

multiply both sides by d

so,

m₁/m₂ = λ₂/λ₁

we substitute

m₁/m₂ = 510 nm / 425 nm

m₁/m₂ = 510 nm / 425 nm

divide through by 85

m₁/m₂ = 6 / 5

hence m₁ and m₂ are 6 and 5

so, from the previous formula

tanθ₂ = m₂λ₂/d

we substitute

tanθ₂ = [ 5 × ( 510 × 10⁻⁹ m ) ] / 1.75 × 10⁻³ m

tanθ₂ = 255 × 10⁻⁸ m / 1.75 × 10⁻³ m

tanθ₂ = 255 × 10⁻⁸ m / 1.75 × 10⁻³ m

tanθ₂ = 0.00145714

θ₂ = tan⁻¹( 0.00145714 )

θ₂ = 0.0834879⁰

Therefore, the required angle is 0.0834879⁰

Answer:

(a) The self inductance, L = 21.95 mH

(b) The energy stored, E = 4.84 J

(c) the time, t = 0.154 s

Explanation:

(a) Self inductance is calculated as;

[tex]L = \frac{N^2 \mu_0 A}{l}[/tex]

where;

N is the number of turns = 1000 loops

μ is the permeability of free space = 4π x 10⁻⁷ H/m

l is the length of the inductor, = 45 cm = 0.45 m

A is the area of the inductor (given diameter = 10 cm = 0.1 m)

[tex]A = \pi r^2 = \frac{\pi d^2}{4} = \frac{\pi \times (0.1)^2}{4} = 0.00786 \ m^2[/tex]

[tex]L = \frac{(1000)^2 \times (4\pi \times 10^{-7}) \times (0.00786)}{0.45} \\\\L = 0.02195 \ H\\\\L = 21.95 \ mH[/tex]

(b) The energy stored in the inductor when 21 A current ;

[tex]E = \frac{1}{2}LI^2\\\\E = \frac{1}{2} \times (0.02195) \times (21) ^2\\\\E = 4.84 \ J[/tex]

(c) time it can be turned off if the induced emf cannot exceed 3.0 V;

[tex]emf = L \frac{\Delta I}{\Delta t} \\\\t = \frac{LI}{emf} \\\\t = \frac{0.02195 \times 21}{3} \\\\t = 0.154 \ s[/tex]

Answer:

[tex]h=10m[/tex]

Explanation:

From the question we are told that:

Area [tex]a=70 x 10^{-6}[/tex]

Force [tex]F=7N[/tex]

Generally the equation for Pressure is mathematically given by

Pressure = Force/Area

[tex]P=\frac{F}{A}[/tex]

[tex]P=\frac{ 7}{(70 * 10^{-6})}[/tex]

[tex]P= 1*10^{5} Pa[/tex]

Generally the equation for Pressure is also mathematically given by

[tex]P=hpg[/tex]

Therefore

[tex]h=\frac{P}{hg}[/tex]

[tex]h=\frac{10000}{1000*9.8}[/tex]

[tex]h=10m[/tex]

Answer:

0.032 [tex]m/s^2[/tex]

Explanation:

Given :

Weight of the astronaut = 69 kg

Weight of the physics book = 28 kg

Acceleration of the astronaut = 0.0130 [tex]m/s^2[/tex]

The force that is applied on the astronaut :

[tex]F=ma[/tex]

   [tex]$=69 \times 0.013$[/tex]

   = 0.897 N

Therefore, by Newton's 3rd law, we know that the force applied on the physics book is also F = 0.897 N

Therefore, the acceleration of the physics book is given by :

[tex]$a = \frac{\text{Force on physics book}}{\text{mass of physics book}}$[/tex]

[tex]$a = \frac{0.897}{28}$[/tex]

a = 0.032 [tex]m/s^2[/tex]

Hence, the acceleration of the physics book is  0.032 [tex]m/s^2[/tex].

Answer:

The acceleration of astronaut is 5.27 x 10^-3 m/s^2.

Explanation:

mass of astronaut, M = 69 kg

Mass of book, m = 28 kg

acceleration of book, a = 0.013 m/s^2

Let the acceleration of astronaut is A.

According to the Newton's third law, for every action there is an equal and opposite reaction.

So, the force acting on the book is same as the force acting on the astronaut but the direction is opposite to each other.

M A = m a

69 x A = 28 x 0.013

A = 5.27 x 10^-3 m/s^2

Answer:Lesson Objectives

Describe how the action of waves produces different shoreline features.

Discuss how areas of quiet water produce deposits of sand and sediment.

Discuss some of the structures humans build to help defend against wave erosion.

Vocabulary

arch

barrier island

beach

breakwater

groin

refraction

sea stack

sea wall

spit

wave-cut cliff

wave-cut platform

Introduction

Waves are important for building up and breaking down shorelines. Waves transport sand onto and off of beaches. They transport sand along beaches. Waves carve structures at the shore.

Wave Action and Erosion

All waves are energy traveling through some type of material, such as water (Figure below). Ocean waves form from wind blowing over the water.

Ocean waves are energy traveling through water.

The largest waves form when the wind is very strong, blows steadily for a long time, and blows over a long distance.

The wind could be strong, but if it gusts for just a short time, large waves won’t form. Wave energy does the work of erosion at the shore. Waves approach the shore at some angle so the inshore part of the wave reaches shallow water sooner than the part that is further out. The shallow part of the wave ‘feels’ the bottom first. This slows down the inshore part of the wave and makes the wave ‘bend.’ This bending is called refraction.

Wave refraction either concentrates wave energy or disperses it. In quiet water areas, such as bays, wave energy is dispersed, so sand is deposited. Areas that stick out into the water are eroded by the strong wave energy that concentrates its power on the wave-cut cliff (Figure below).

The wave erodes the bottom of the cliff, eventually causing the cliff to collapse.

Other features of wave erosion are pictured and named in Figure below. A wave-cut platform is the level area formed by wave erosion as the waves undercut a cliff. An arch is produced when waves erode through a cliff. When a sea arch collapses, the isolated towers of rocks that remain are known as sea stacks.

(a) The high ground is a large wave-cut platform formed from years of wave erosion. (b) A cliff eroded from two sides produces an arch. (c) The top of an arch erodes away, leaving behind a tall sea stack.

Wave Deposition

Rivers carry sediments from the land to the sea. If wave action is high, a delta will not form. Waves will spread the sediments along the coastline to create a beach (Figure below). Waves also erode sediments from cliffs and shorelines and transport them onto beaches.

Sand deposits in quiet areas along a shoreline to form a beach.

Beaches can be made of mineral grains, like quartz, rock fragments, and also pieces of shell or coral (Figure below).

Quartz, rock fragments, and shell make up the sand along a beach.

Waves continually move sand along the shore. Waves also move sand from the beaches on shore to bars of sand offshore as the seasons change. In the summer, waves have lower energy so they bring sand up onto the beach. In the winter, higher energy waves bring the sand back offshore.

Some of the features formed by wave-deposited sand are in Figure below. These features include barrier islands and spits. A spit is sand connected to land and extending into the water. A spit may hook to form a tombolo.

Examples of features formed by wave-deposited sand.

Shores that are relatively flat and gently sloping may be lined with long narrow barrier islands (Figure below). Most barrier islands are a few kilometers wide and tens of kilometers long.

(a) Barrier islands off of Alabama. A lagoon lies on the inland side. (b) Barrier islands, such as Padre Island off the coast of Texas, are made entirely of sand. (c) Barrier islands are some of the most urbanized areas of our coastlines, such as Miami Beach.

In its natural state, a barrier island acts as the first line of defense against storms such as hurricanes. When barrier islands are urbanized (Figure above), hurricanes damage houses and businesses rather than vegetated sandy areas in which sand can move. A large hurricane brings massive problems to the urbanized area.

Protecting Shorelines

Intact shore areas protect inland areas from storms that come off the ocean (Figure below).

Dunes and mangroves along Baja California protect the villages that are found inland.

Explanation:

Answer: Below

Explanation: Correct on Edmentum

Answer:

a)  [tex]v=206.896m/s[/tex]

b)  [tex]L=6.749m[/tex]

Explanation:

From the question we are told that:

Frequency [tex]F=46Hz[/tex]

Length [tex]l=579m[/tex]

Total Mass [tex]T=4.3kg[/tex]

Tension [tex]T=3423[/tex]

a)

Generally the equation for velocity is mathematically given by

[tex]v=\sqrt{\frac{T}{\rho}}[/tex]

Where

[tex]\pho=m*l\\\\\pho=46*579\\\\\pho=0.0799kg/m[/tex]

Therefore

[tex]v=\sqrt{\frac{3423}{0.0799}}[/tex]

[tex]v=206.896m/s[/tex]

b)

Generally the equation for length of string is mathematically given by

[tex]L=\frac{3\lambda}{2}[/tex]

Where

[tex]\lambda=\frac{v}{f}[/tex]

[tex]\lambda=\frac{206.89}{46}[/tex]

[tex]\lambda=4.498[/tex]

Therefore

[tex]L=\frac{3*4.498}{2}[/tex]

[tex]L=6.749m[/tex]

the question is about tyres of a race car, which are made of rubber and will be in contact with a race track, which is generally made from asphalt, the static coefficient of friction is in the range of (0.5–0.8), in dry conditions (Source: Friction and Friction Coefficients ).

Explanation:

please mark me as a brainlieast

Answer:

a)   θ = 14.23º, b)   θ₂ = 75.77,  c) t = 0.6019 s

Explanation:

This is a missile throwing exercise.

a) the reach of the ball is the distance traveled for the same departure height

          R = [tex]\frac{v_o^2 \ sin 2 \theta }{g}[/tex]

          sin 2θ = [tex]\frac{Rg}{v_o^2}[/tex]

          sin 2θ = 7.00 9.8 / 12.0²

          2θ = sin⁻¹ (0.476389) = 28.45º

           θ = 14.23º

the complementary angle that gives the same range is the angle after 45 that the same value is missing to reach 90º

          θ ’= 90  -14.23

          θ’= 75.77º

b) the two angles that give the same range are

         θ₁ = 14.23

         θ₂ = 75.77

the greater angle has a much greater height so the time of the movement is greater and has a greater chance of being intercepted by the other team.

C) the time of the pass can be calculated with the expression

           x = v₀ₓ t

           t = x / v₀ₓ

           t = 7 / 11.63

           t = 0.6019 s

Answer:

Energy = .13 W / m^2      energy of incident energy

N = 3500 Watts / day       power needed

N = 3500 Watts  (3600 * 24 sec) = .0405 Watts/sec

The problem must mean that one needs 3.5 Kw-days

3.5 Kw-days = 3500 watts * 86400 sec = 3.02E8 joules

150 J/sec-m^2 * .13 = 19.5 J / sec-m^2      usable energy

In one day 19.5 J/sec-m^2 = 1.68E6 J/m^2    usable energy received

Area = 3.028E8 J / 1.68E6 J/m2 = 180 m^2

One would need 180 m^2 of solar panels

That's quite a lot of energy

A 1100 watt microwave oven uses 1.1 kW while running so 3.5 kW for 24 hours seems to be quite a lot.

Answer:

Following are the solution to the given question:

Explanation:

For charging plates that are connected in a similar manner:

Calculating the total charge:

[tex]\to q =q_1 + q_2 = C_1V_1 +C_2V_2 =1320 + 2714 = 4034 \mu C[/tex]

Calculating the common potential:

[tex]\to V = \frac{q}{C}= \frac{q}{(C_1 + C_2)} =\frac{4034}{6.8} = 593 \ V\\\\[/tex]

Calculating the charge after redistribution:

[tex]When: \\\\q = q_{1}' + q_{2}' = q_1 + q_2[/tex]        

[tex]\to q_{1}' = C_1V = 2.2 \times 593 = 1305\ \mu C\\ \\ \to q_{2}' = C_2V = 4.6 \times 593 = 2729 \ \mu C[/tex]

Answer:

300J

Explanation:

Work done = Force x the distance travelled in the direction of the force

=300 x 1

=300J

(1) When the driver is at rest, the restoring force exerted by spring is equal in magnitude to the driver's weight, so that

∑ F = s - mg = 0   ==>   s = mg = 617.4 N

If the spring is compressed 0.015 m, then the spring constant k is such that

617.4 N = k (0.015 m)   ==>   k = 41,160 N/m ≈ 41 kN/m

(2) The total mass of the passengers is

24 (68 kg) + 3 (15 kg) + 5 (3 kg) + 25 kg = 1717 kg

so that if everyone is at rest, the spring is compressed a distance x such that

kx = (1717 kg) g   ==>   x ≈ 0.41 m

Answer:

KE_2 = 3.48J

Explanation:

Conservation of Energy

E_1 = E_2

PE_1+KE_1 = PE_2+KE_2

m*g*h+(1/2)m*v² = m*g*h+(1/2)m*v²

(0.0780kg)*(9.81m/s²)*(5.36m)+(.5)*(0.0780kg)*(4.84m/s)² = (0.0780kg)*(9.81m/s²)*(2m)+KE_2

4.10J+0.914J = 1.53J + KE_2

5.01J = 1.53J + KE_2

KE_2 = 3.48J

Answer:

A change in pressure at one point in an incompressible fluid is felt at every other point in the fluid.

Explanation:

Pascal's principle states that ''pressure applied to an enclosed fluid will be transmitted without a change in magnitude to every point of the fluid and to the walls of the container.''(Science direct).

The implication of this law is; that a change in pressure at one point in an incompressible fluid is felt at every other point in the fluid. Hence the correct answer chosen above.

The Pascal's principle is applied in hydraulic jacks and automobile brakes.

Answer:

The unit of the time constant RC is the second

Explanation:

The unit of resistance, R is the Ohm, Ω and resistance, R = V/I where V = voltage and I = current. The unit of voltage is the volt, V while the unit of current is the ampere. A.

Since R = V/I

Unit of R = unit of V/unit of I

Unit of R = V/A

Ω = V/A

Also, The unit of capacitance, C is the Farad, F and capacitance, F = Q/V where Q = charge and V = voltage. the unit of charge is the coulomb, C while the unit of voltage is the volt, V

Since C = Q/V

Unit of C = unit of Q/unit of V

Unit of C = C/V

F = C/V

Now the time constant equals RC.

So, the unit of the time constant = unit of R × unit of C = Ω × F = V/A × C/V = C/A

Also. we know that the  1 Ampere = 1 Coulomb per second

1 A = 1 C/s

So, substituting 1 A in the denominator, we have

unit of RC =  C/A = C ÷ C/s = s

So, the unit of RC = s = second

So, the unit of the time constant RC is the second

The aspect of the US justice system that has its roots in Jewish scripture is:

the idea that all people are subject to the same rules and laws.

It is the doctrine of "equality before the law."  Equality before the law means that every individual is equal in the eyes of the law, whether the individual is a lawmaker, a judge, a law enforcement officer, etc.  Equality before the law is also known as equality under the law, equality in the eyes of the law, legal equality, or legal egalitarianism.  It is a legal principle that treats each independent being equally and subjects each to the same laws of justice and due process.

Answer:

answer is C

the idea that all people are subject to the same rules and laws

Explanation:

hope this helps!

Answer:

b. The heavier one reaches the bottom first.

Answer:

B

Explanation:

The answer is B the heavier item has more g force pushing it making it roll faster reaching the bottom of the ramp first.

Answer:

No. As we gain mass the force of gravity on us does not decrease

Answer:

to the right

Explanation:

if the car turns to the lift, the body forces energy to the left side, so according to the first law of Newton, the body will move to the right side to resist the sudden motion.

Answer:

in which topic you need help