How many neutrons are in K-37?

Answers

Answer 1

Answer:

18 neutrons

Explanation:

Potassium is nuimber 19 on periodic table, so when the mass equals 37, you simply subtract 37-19 to get 18

potassium usually has a mass of 39, so when we have potassium 37, it is two less neutrons than normal


Related Questions

What would be the difference in your welght if you were four times farther from the center of Earth than you are now?

Answers

you would die.

the core of the earth is as hot as the sun surface so you would be dead

A pail of water of mass 2000 gm is rotated in a vertical circle of radius 1.00 m. What is the pail’s minimum speed at the top of the circle if no water is to spill out and the tension exerted by the string is 25 N?

Answers

The pail’s minimum speed at the top of the vertical circle is 4.72 m/s.

The given parameters:

Mass of the water, m = 2000 g = 2 kgRadius of the circle, r = 1 mTension on the string, T = 25 N

The net force on the pail of water at the top of the vertical circle is calculated as follows;

[tex]T = ma - mg\\\\T = \frac{mv^2}{r} - mg\\\\T + mg = \frac{mv^2}{r} \\\\mv^2 = r(T + mg)\\\\v^2 = \frac{r(T + mg)}{m} \\\\v= \sqrt{\frac{r(T + mg)}{m}} \\\\v = \sqrt{\frac{1 (25\ + \ 2 \times 9.8)}{2}} \\\\v = 4.72 \ m/s[/tex]

Thus, the pail’s minimum speed at the top of the vertical circle is 4.72 m/s.

Learn more about tension on top of vertical circle here: https://brainly.com/question/19904705

The pail’s minimum speed at the top of the circle if no water is to spill out is; v = 4.722 m/s

We are given;

Mass of the pail of water; m = 2000 g = 2kg

Radius of the circle; r = 1 m

Tension exerted by string; T = 25 N

To calculate the net force on the pail of water at the top of the vertical circle, let us take equilibrium of forces to give;

W - T = ma

Where;

W is weight = mg

T is tension on the string

Now, in circular motion, we know that;

Acceleration is; a = v²/r

Thus;

mg - T = m(v²/r)

Making v the subject of the formula gives us;

v = √[(r(T + mg)/m)

Plugging in the relevant values gives;

v = √[(1(25 + (2 * 9.8))/2)

v = 4.722 m/s

Read more about Tension exerted by spring atop a vertical circle at; https://brainly.com/question/19904705

give answer or fight me

Answers

The answer is that they are translucent

Answer:

translucent

Explanation:

Hope this helps! Pls give brainliest! Also, please sub to Kgirl633 on yt.

Make a super villain out of these resources

Answers

Answer:the super villain would have the ability to control electricity and could take any Metal object or weapons that anyone points at him because he is magnetic

Explanation:

A sled is launched off a cliff 39 m high and lands 74 m away from the base of the cliff. How fast was the sled launched?

Answers

The sled was launched with a velocity of 26.24 m/s

We'll begin by calculating the the time taken for the sled to land

Height (h) = 39 m

Acceleration due to gravity (g) = 9.8 m/s²

Time (t) =?

[tex]t = \sqrt{ \frac{2h}{g}} \\ \\t = \sqrt{ \frac{2 \times 39}{9.8}} \\ \\ t = 2.82 \: s \\ \\ [/tex]

Finally, we shall determine the velocity.

Time (t) = 2.82 s

Horizontal distance (s) = 74 m

Horizontal velocity (u) =?

[tex]u = \frac{s}{t} \\ \\ u= \frac{74}{2.82} \\ \\ u = 26.24 \: m/s \\ \\ [/tex]

Therefore, the sled was launched with a velocity of 26.24 m/s

Learn more: https://brainly.com/question/25808490

Which are the products in the equation CH3SH + 4O2 → CO2 + SO2 +2H2O? Check all that apply.

Answers

Answer:

ch3sh + 4O2 are the products

Calculate the force of gravity of a 25kg block resting on the earth (M=5.97x10^24kg). The radius of the earth is 6.38x10^6m.

I already know...
[tex](6.67*10^{-11})(25)(5.97*10^{24} )/(6.38*10^6)^2[/tex]

But I don't understand what steps I have to take to solve that equation

Answers

From Newton's law of gravity, the force of gravity is 245 Newtons

To calculate the force of gravity of a 25kg block resting on the earth of mass M = 5.97x10^24kg with the radius r of the earth is 6.38x10^6m, let us first list out all the given parameters

Mass m = 25 kg

Mass of the earth M = 5.97x10^24kg

Radius r = 6.38x10^6m

Force F = ?

The formula to calculate the force of gravity is

F = (GMm)/[tex]r^{2}[/tex]

Where G = 6.67 x [tex]10^{-11}[/tex]

Substitute all the parameters

F = (6.67 x [tex]10^{-11}[/tex] x 5.97x10^24 x 25) / (6.38x10^6)^2

F = 9.9 x [tex]10^{15}[/tex] / 4.07 x [tex]10^{13}[/tex]

F = 244.56 N

F = 245 Newtons (approximately)

Therefore, the force of gravity is 245 Newtons

Learn more about force of gravity here: https://brainly.com/question/557206

A person uses a screwdriver to turn a screw and insert it into a piece of wood. The person applies a force of 20 newtons to the screwdriver and turns the handle of the screwdriver a total distance of 0.5 meter. How would these numbers be different if the person inserted a nail with a hammer instead of the screw with the screwdriver?
A. The force applied would be greater, but the distance would be shorter.

B. The force applied would be less, but the distance would be greater.

C. The force applied would be the same, but the distance would be shorter.

D. The force applied would be the same, but the distance would be greater.

Answers

If the person inserted a nail with a hammer instead of the screw with the screwdriver, the force applied would be greater, but the distance would be shorter. The correct option is A.

What is force?

The action of push or pull in order to make a body change its state of motion or rest is called Force.

As the force is pressure per unit area. Force is inversely proportional to the area over which force is to applied.

The hammer would take more force to insert the nail. The screw has its helix which is to be inserted and application of force is small.

Thus, the force applied would be greater, but the distance would be shorter.  The correct option is A.

Learn more about force.

https://brainly.com/question/11065475

#SPJ2

t if the person inserted a nail with a hammer instead of the screw with the screwdriver?

i do believe that i need help

Answers

WHAT IS THAT omg Helpppp

The table below describes some features of methods used to generate electricity. What is method 3?

Answers

Answer:

dam/hydro power

Explanation:

estuary is the place where rivers meet the ocean, there are a lot of currents there (waves...) so it likely means thery use a dam or some sort of way of collecting electricity from the motion of the water there. many birds live in estuaries because of being able to find fish to feed from

Method 3 is "Estuary." describes some features of methods used to generate electricity.

An estuary is a coastal area where freshwater from rivers meets and mixes with saltwater from the ocean. This mixing creates a unique and dynamic environment that can be harnessed for electricity generation using a method called "tidal energy" or "tidal power." Tidal energy is a renewable energy source that captures the kinetic energy generated by the ebb and flow of tides in estuaries.

Ideal Location: Estuaries are ideal locations for tidal energy generation because they experience regular and predictable tidal movements due to the gravitational pull of the moon and sun. The rise and fall of tides create kinetic energy in the moving water.

Method: Tidal energy is harnessed using underwater turbines that are placed in strategic locations within the estuary. As the tidal currents flow in and out, they drive the turbines, which generate mechanical energy. This mechanical energy is then converted into electricity using generators.

Possible Problem: One potential problem associated with tidal energy generation in estuaries is its impact on the local ecosystem. The underwater turbines and infrastructure could potentially disrupt marine life and habitats, affecting fish migration patterns and other aquatic species. It's important to carefully study and manage the environmental impact of tidal energy projects to minimize any negative consequences.

Overall, tidal energy from estuaries offers a renewable and predictable source of electricity, but it requires careful planning and environmental considerations to ensure sustainable and responsible energy production.

To learn more about Estuary, here

https://brainly.com/question/8516305

#SPJ3

A 40 N block is resting on a rough inclined plane. The static friction between the block and the plane is ____ N.​

Answers

The static friction between the block and the plane is [tex]40(\mu_s) \ N[/tex].

The given parameters:

Weight of the block, W = 40 N

The normal reaction on the rough surface due to weight of the block is calculated as follows;

[tex]F_n = 40 \ N[/tex]

The static friction between the block and the plane is calculated as follows;

[tex]F_s = \mu_s F_n[/tex]

where;

[tex]\mu_s[/tex] is coefficient of static friction

Thus, the static friction between the block and the plane is [tex]40(\mu_s) \ N[/tex].

Learn more about static friction here: https://brainly.com/question/13680415

Preston goes on a camel safari. There, he travels 5 km north, then 3 km east.

Answers

7777Answer:

Explanation:

Ok but what’s the question?

Describe the water cycle. Be sure to include the following terms in your response: evaporation, condensation, and precipitation.your respone:

Answers

Evaporation, or turning liquid to a gas, is first. Then it goes into the atmosphere and codensates, or turns back to a liquid, these water droplets form into clouds and come down as precipitation, rain, sleet, snow etc. Then the water cycle starts again

pls help me, its just fill in the blank

Answers

1. Frequency

2. Reflected

3. Absorbed

4. Black

Which of these best describes the relationship between the incident ray, the reflected ray, and the normal for a curved mirror?(1 point)

The angle that the incident ray makes with the normal is different than the angle that the reflected ray makes with the normal. All points on a curved mirror have the same normal.
The angle that the incident ray makes with the normal is different than the angle that the reflected ray makes with the normal. All points on a curved mirror have the same normal.

The angle that the incident ray makes with the normal is the same as the angle that the reflected ray makes with the normal. Different points on a curved mirror have a different normal.
The angle that the incident ray makes with the normal is the same as the angle that the reflected ray makes with the normal. Different points on a curved mirror have a different normal.

The angle that the incident ray makes with the normal is different than the angle that the reflected ray makes with the normal. Different points on a curved mirror have a different normal.
The angle that the incident ray makes with the normal is different than the angle that the reflected ray makes with the normal. Different points on a curved mirror have a different normal.

The angle that the incident ray makes with the normal is the same as the angle that the reflected ray makes with the normal. All points on a curved mirror have the same normal.

Answers

For a curved mirror, all points have the same normal and the angle of incidence is also equal to the angle of reflection.

According to the laws of reflection, the incident ray, reflected ray and normal all lie on the same plane. For a curved mirror, the normal remains the same at all points along the curved mirror.

Again, the angle made between the incident ray and the normal is the same as the angle made between the reflected ray and the normal. Therefore, the angle of reflection is equal to the angle of incidence.

Learn more: https://brainly.com/question/17638582

What is the smallest value of the force F such that the 8.0 kg block will not slide down the wall? The coefficient of static friction between the block and the wall is 0.4.



Select one:

a. 10N

b. 100N

c. 200N

d. 98N

Answers

The smallest value of the force that will make the block not to slide down is 10 N.

We'll begin by calculating the normal reaction. This can be obtained as follow:

Mass (m) = 8 KgAcceleration due to gravity (g) = 10 m/s²Normal reaction (N) =?

N = mg

N = 8 × 10

N = 80 N

Finally, we shall determine the frictional force.

Coefficient of friction (μ) = 0.4Normal reaction (N) = 80 NFrictional Force (F) =?

F = μN

F = 0.4 × 80

F = 32 N

Since the frictional force is 32 N, therefore, a force lesser than the frictional force will make the block not to slide down.

From the options given above, only option A has a force that is lesser than the frictional force.

Therefore, the correct answer to the question is Option A. 10 N

Learn more about frictional force:

https://brainly.com/question/20049999

Compare the amount of kinetic energy of particles in each state of matter- solid, liquid, gas

Answers

Answer:

gas moves around the most so it would have the most kinetic energy and solids would have the least as they only vibrate a tiny bit(not visible to the naked eye)

Miguel, a single teacher, earns $1,500 every two weeks (biweekly). He claims two allowances. What is his federal income tax withholding for each biweekly paycheck?

Answers

The federal income tax withholding for each biweekly paycheck for the single teacher is $259.9.

The given parameters:

Biweekly amount earned by the single teacher, = $1,500

The federal tax rate for single workers is given as;

amount between $436 and $1,506 = $34.9 plus 15%

The federal income tax withholding for each biweekly paycheck for the single teacher is calculated as follows;

income tax withholding = $34.9  +  0.15($1,500)

income tax withholding = $34.9  +  $225

income tax withholding  = $259.9

Thus, the federal income tax withholding for each biweekly paycheck for the single teacher is $259.9.

Learn more about income tax withholding here: https://brainly.com/question/24843986

An object accelerates from rest to 93 m/s over a distance of 49 m. What acceleration did it experience?

Answers

Answer:

[tex]88.3ms {}^{ - 2} [/tex]

or 88.3m/s^2

Explanation:

Using suvat where we list everything that we are given

s=49m

u=0m/s

v=93m/s

a=?

t=we are not given this value, so we don't use

using a formula that doesn't involve time:

[tex]v {}^{2} = u {}^{2} + 2as[/tex]

rearranging to find acceleration by subtracting u^2 on both sides

[tex]v {}^{2} - u {}^{2} = 2as[/tex]

then dividing 2s on both sides

[tex] \frac{v {}^{2} - u {}^{2} }{2s} = a[/tex]

[tex] \frac{(93) {}^{2} - (0) {}^{2} }{2 \times(49) } = 88.3ms {}^{ - 2} [/tex]

so the acceleration is 88.3ms^-2 (1dp)

What is the relationship between momentum and speed?

Answers

Answer:

Momentum is directly proportional to the object's mass and also its velocity.

Explanation:

Thus the greater an object's mass or the greater its velocity, the greater its momentum. Momentum p is a vector having the same direction as the velocity v.

A 2-kg object is pulled to the left with a force of 30 N and to the right with a force of 9 N. What is the acceleration of the object?

Answers

An object that weighs  75  N is pulled horizontally to the right with a force of  50  N. The force of friction on this object is  30  N to the left. What is the acceleration of the object?

The force on the object is  50  N to the right and  30  N to the left.

⇒  The net force on the object is,  =50−30=20  N to the right.

The weight of the object is,  =75  N.

⇒  The mass of the object is  ==759.8  kg.

⇒  The acceleration of the object is  ==20759.8=2.613  m/s 2.

The acceleration of the object is 10 [tex]m/s^2[/tex].

What is Acceleration?

Acceleration is defined as the rate of change of velocity of an object with respect to time which are vector quantities i.e. both magnitude and direction. The orientation of an object's acceleration is given by the orientation of the net force acting on that object.

It can be expressed as:

a= v/t

where, a is the acceleration

v is the velocity

t is the time taken

It can also be expressed as F=ma

where, F= force applied

m= mass of the object

So, for above given information

The force on the object is 9N to the right and  30N to the left. The net force on the object is 21N to the left

The mass of the object is 2kg

So, a= 21N/ 2 kg = 10.5 [tex]m/s^2[/tex]

Thus, the acceleration of the object is 10 [tex]m/s^2[/tex].

Learn more about Acceleration, here:

https://brainly.com/question/12550364

#SPJ2

An object of length 3.00 cm is inside a plastic block with index of refraction 1.40. If the object is viewed from directly above, what is the length of its image?

Answers

The length of its image = [tex]-3cm[/tex]

Given,

length of object, [tex]h_o = 3 cm[/tex]

We know, for flat refracting surface,  

Image distance = object distance

So,

magnification is = [tex]-1[/tex]

length of the image,

[tex]h_i = magnification * h_o\\\\h_i = -1 * 3 \\\\h_i = -3cm[/tex]

Here, negative sign means inverted image.

For more information on refraction, visit

https://brainly.com/question/14760207?referrer=searchResults

What is kinematics . Give two examples​

Answers

Answer:

kinematics explains the terms like acceleration, velocity, and position of the objects while in motion.

Some important parameters in kinematics are displacement, velocity, and time.

Explanation:

your welcome,can you give me the brainliest? plssss

thank me if it was correct for you too.

Answer:

Definition of Kinematics :-

Kinematics is the study of the motion of mechanical points, bodies and systems without consideration of their associated physical properties and the forces acting on them. ... An example model of bodies in a system is the gears in a vehicle's transmission.

Example of kinematics :- The examples for kinematics are given below: -i) Moving train and bus. ii) Motion of a mass on inclined plane. iii) Running water in the river. iv) Falling water from a mountain peak.

Explanation:

Hope this helps you dear ✌️Carry on learning !!

A child on a spinning ride at a playground has a centripetal acceleration of 0. 80 m/s2. The child completes a full circle every 4. 2 s. How far from the center of the ride is the child? 0. 068 m 0. 085 m 0. 27 m 0. 36 m.

Answers

The distance of the child from the center of the ride is 0.28 m.

The given parameters;

Centripetal acceleration of the child, a = 0.8 m/s²Number of revolution, = 1 rev per 4.2 s

The angular speed of the child is calculated as follows;

[tex]\omega = \frac{1 \ rev}{4.2 \ s} \times \frac{2 \pi \ rad}{1 \ rev} \\\\\omega = 1.5 \ rad/s[/tex]

The radius of the circle is calculated as follows;

[tex]a_c = \omega ^2 r\\\\r = \frac{a_c }{\omega ^2} \\\\r = \frac{0.8}{1.5^2} \\\\r = 0.28 \ m[/tex]

Thus, the distance of the child from the center of the ride is 0.28 m.

Learn more about angular speed here: https://brainly.com/question/6860269

GUYS COULD SOMEONE PLEASE HELP ME?
PLEASE ASAP

Write a summary of how the eye works:

Answers

Answer:

Eye function renders you the sense of sight. They convert light into electrical signals. Afterwards, the brain deciphers these electrical signals into images. Properly working healthy eyes are able to perform the following functions.

Explanation:

A loaded truck collides with a car causing huge damage to the car. Which of the following is true about the collision? *

A. The force on the truck is greater than the force on the car
B. The force on the car is greater than the force on the truck
C. The force on the truck is the same in magnitude as the force on the car
D. During the collision the truck makes greater displacement than the car
E. During the collision the truck has greater acceleration than the car

Answers

The force on the truck is the same in magnitude as the force on the car.

The impulse experienced by an object during collision is directly proportional to the applied force and time of collision of the objects.

J = Ft

where;

J is the impulse experienced by the objectt is the time

The increase in the force applied to an object causes an increase in the impulse experienced by the object.

Also, according to Newton's third law of motion, the force exerted on the loaded truck and the car are equal in magnitude but opposite in direction.

Thus, we can conclude that, the force on the truck is the same in magnitude as the force on the car.

Learn more about Newton's third law of motion here: https://brainly.com/question/25998091

Help if u can please

Answers

Answer:

d

Explanation:

please help asap!!!!!!!!!!!

Answers

The answer would be 20000

The answer in standard form/scientific notation would be 2 x 10^4

(The exponent is 4 because that's how many digits after the 2 there is)

AB
ca
The trough of a transverse wave is BEST shown by choice
es - )
8
8

Answers

Answer:

bro the way you worded it makes no since

Can we get less ads please i don’t like this

Answers

I hope we can! I dont like the ads either! they are horrible on these appsn
Other Questions
All of the following describe likely air mass source regions in the summer EXCEPT: Group of answer choices the subtropical Western Atlantic Ocean Northern Mexico the Central United States the subtropical Eastern Pacific Ocean Write a passage (about 150 words) that uses dialogue to develop character and/or mood. Explain why having three congruent angles in two triangles is not a good way to prove twotriangles are congruent. Come up with a counter example, you can describe or draw it. Jerome solved the equation below by graphing. log Subscript 2 Baseline x + log Subscript 2 Baseline (x minus 2) = 3 Which of the following shows the correct system of equations and solution? Which is the longest distance? A: 3500cm B: 65.5m C: 75000mm D: 15.5m E: 0.1km Which equation shows a slope of 3 and a y-intercept of (0,7)?y = 7x + 3y = 7x + 3y = 3xy = 3x + 7 If a rope 36 feet long is cut into two pieces in such a way that one piece is twice as long as the other piece, how long must the long piece be? If a rope 36 feet long is cut into two pieces in such a way that one piece is twice as long as the other piece, how long must the long piece be Please help im new and i need help!Please help me if you onlw the answers please!! the force between the earth and the body which is at a distance r from the center of the earth is F. What must be this distance for the force to be doubled. How is the potential difference same in capacitors arranged in parallel combination? Please answer this!!! i need to stop(doing to do)my homework late at night. keep making terrible mistakes.(choose one form from the bracket to complete the sentence) Provide a real-world situation in which it would be appropriate to use a geometric sequence or series. Be sure to explain why a series or a sequence is more appropriate a microwave oven has a capacity of 1.59ft. the interior of the microwave of the is 14 in wide and 14 in deep. what is the height of the interior of the microwave, to the nearest tenth of a foot i need help!!! due by 12 How often should you exercise?O 1-2 times a week for 45 minuteso 2-3 times a week for an hourO 3-4 times a week for an hourO 6-7 days a week for an hour WHERE ARE THE EXPERTS AND ACE!!!!!!! I NEED HELP PLS SHARE YO SMARTNESS!!!!! WILL GIVE BRAINLIEST AND RATE AND VOTE!!! The discount rate is a. the rate at which the Fed lends to banks. b. the rate at which public banks lend to other public banks. c. the percentage difference between the face value of a Treasury bond and what the Fed pays for it. d. the percentage of deposits banks hold as excess reserves. cual es la importancia de los solidos en la vida ? 17. The name of the reaction that produces esters isA. addition.B. anionic initiated polymerization.C. radical initiated polymerization.D. dehydration