need help answering this question

Need Help Answering This Question

Answers

Answer 1

Answer: Wow. I just did that not so long ago. The mean is 76, i think the deviation is 73 and ill recall my notes for the next, hold on

Explanation:


Related Questions

How pine are processed ????

Answers

Answer:

The in-shell pine nuts enter a long rotating cylinder where the shells are crushed between two cylinders (2). The product is then sieved/sorted to spate the shells from the nuts, leaving the nuts ready for further processing. Once the shelling process is complete, the pine nuts are then dried.

Explanation:

hope it helps:)


a. State the functions of the followings
a. Commutator
b. Armature core
c. Field system
d. Brushes
e. Armature winding

Answers

Answer:

a. State the functions of the followings

a. Commutator:

the commutator reverses the current direction with each turn serving as a mechanical rectifier to convert the alternating current from the windings to unidirectional direct current in the external load circuit.

b. Armature core

Armature core is a physical structure made up of silicon steel stampings. The core is laminated to keep iron losses low. Armature winding is the main current carrying winding where we either provide(electric supply to motor) or extract e.m.f(collect electric power from generator).

c. Field system

The field winding basically form an electromagnet, that produces field flux within which the rotor armature of the DC motor rotates, and results in the effective flux cutting

d. Brushes

The function of brushes is that the brushes conduct current between stationary wires and moving parts of the electric Generator.

e. Armature winding

The winding wound on the core is given current through a DC supply. This current-carrying winding as under the influence of the magnetic field develops a force that develops a rotational torque. This torque enables the machine to rotate.

[tex] \bold \pink{ \underline{hope \: it \: helps}}[/tex]

Help! Please explain also. Thank you

Answers

Answer:

17A) 52mm

17B) 132mm

17C) 67mm

18.) 34

Explanation:

For 17)

Each distance is determined by the total distances surrounding it. For example, 17A is 73mm - 21mm, which is 52mm.

For 18)

Set up the problem as an algebraic expression:

a + b + c + d = 115

Since you know 3 of the values, you can plug them in and subtract them from 115, which turns into 34.

The section 5(a)(1) of the osh act is commonly known as

Answers

Answer:

general duty clause

Explanation:

A computer feedback fuel system has poor driveability when cold. Technician A says
that this could be due to a bad oxygen sensor. Technician B says to check for
external causes such as an intake manifold leak or incorrect fuel system pressure.
Who is correct?
Technician A
Technician B
Both A and B
Neither A nor B

Answers

Answer:

B is correct I believe

If you had to pick a priority for future engineers, what would it be and why?

Answers

Answer:

Explanation:

Civil engineers have become experts in creating sustainable and environmentally friendly buildings and systems. Multiplied over many communities, the energy and emissions savings can make a real difference in the environment. Other life-improving functions can also make communities better places to live.Jul 19, 2017

What effect did the Ice Age have on early humans

Answers

Answer:

The development of homosapiens

Explanation:

People adapted to the harsh weather by creating tools and used land bridges to spread to new regions

openings around pipes that enter building should be covered by

Answers

Answer: I have 2 suggestions: one, maybe, maybe, use some of that metal tape that you get at hardware places, and: two, buy a new pipe (or pipes), two be sure that it won't happen again. Have a good day, and thanks for asking the brain!

Explanation:

Question 2 Given the following gas Volume (%) Component Methane 58.7 Ethane 16.5 9.9 Propane Butanes 5.0 Pentanes 3.5 Hydrogen Suflide 6.4 100 Total I Calculate: 1. Average molecular weight 1. Density at 320F and 14.7 psia ni. Density at OoC and 760 mm mercury iv. Specific gravity and gross and net heating value​

Answers

Answer

I think 51.96 I hope it's help

Rocks in mountains can be weathered by breaking them apart. How can they be eroded?

A. Pieces of rocks are moved by the deep roots of plants.
B. Pieces of rocks are moved by water and gravity.
C. Rocks expand by the temperature changes in the mountains.
D. Rocks are smoothed by the flowing water and ice.

NO LINKS PLEASE!

Answers

Answer: If you look up its definition of eroded it'll tell you the answer should be B

Explanation:

Marketing in the fresh produce industry does not include buying, selling,
transportation or pricing?

Answers

Answer: I personally believe it does, because the Circle of Life, or what I think, at least buying and selling

Explanation:

Find the mean deviation of the set of numbers
(a) 12, 6, 7, 3, 15, 10, 18,5

Answers

Answer:

4.25

Explanation:

The mean deviation is how far, on average, all values are from the middle. To do that, we subtract each element from the mean of the elements, take their absolute values, and then divide by the number of elements in the set. Here's the formula: [tex]\sum\frac{|x-\mu|}{n}[/tex]

Here the mean is 9.5, the count n = 8, so the mean deviation is 4.25

The answer is 4.25 hope that helps ☺️

how many times greater is the value of the 2 of the 270413 than the valuce of the 2 in 419427?

Answers

The value of 2 in 270,413 is 10,000x greater than the value of 2 in 419,427.
Step-by-step explanation:
The value of 2 in 270,413 is 200,000.
The value of 2 in 419,427 is 20
Divide the two numbers together to find your answer:
200,000/20 = 10,000
The value of 2 in 270,413 is 10,000x greater than the value of 2 in 419,427.

Please mark it as brainlest answer:).

4. What is the ampacity of 8-gage copper wire?
O A. 45 amps
OB. 30 amps
O C. 50 amps
O D. 25 amps

Answers

The Answer is C 50 amps

In order to write a good problem statement, you need to identify the following components of the problem.
who, what, when, how
O True
O False

Answers

Answer:

True.

Explanation:

I need help finding a good selling for a 71 Ford mustang hardtop coupe price This isn't really a school question but it's the only place I know we're I can ask questions so I'll give it a go

Answers

Answer:

you know you could use like quora or yahoo answers

Over 30 day period, a lake surface area is 1260 acres. The inflow is 36 cfs, thee outflow is 30 cfs. Seepage loss is 1.5 in. The total precipitation is 4.0 in. Evaporation loss is 6.0 in. Determine the water level change (inch) for the lake during this period.

Answers

Answer:

  -0.1 inches

Explanation:

The net inflow is ...

  36 cfs -30 cfs = 6 cfs

The number of seconds in 30 days is ...

  (3600 s/h)(24 h/da)(30 da) = 2,592,000 . . . . seconds/(30 days)

Then the volume of inflow is ...

  (6 ft^3/s)(2,592,000 s) = 15,552,000 ft^3

The number of square feet in 1260 acres is ...

  (1260 ac)(43560 ft^/ac) = 54,885,600 ft^2

So, the increase in depth due to the inflow is ...

  (15,552,000 ft^3)/(54,885,600 ft^2) ≈ 0.283353 ft ≈ 3.4002 in

__

The net change in water level is then ...

  inflow - seepage + precipitation - evaporation

  3.4 in -1.5 in +4.0 in -6.0 in = -0.1 in

The water level change in the period is -0.1 inch.

Describe two fundamental reasons why flexural strength should depend on porosity

Answers

Answer: The elastic modulus and flexural strength are found to decrease with increased porosity. Fractography studies have been undertaken to identify the role of the pores on the fracture path. The deflection and cracking behavior of concrete structure depend on the flexural tensile strength of concrete. Many factors have been shown to influence the flexural tensile strength of concrete, particularly the level of stress, size, age and confinement to concrete flexure member, etc.

Explanation:

When framing a building, a simple way to estimate the total amount of wall studs needed is to allow
for one for every foot of wall. If you are building a garage that is 17' x 52', how many studs are needed?

Answers

1+1=2
Solution
3:932(2)=61

Two students are discussing weathering and erosion factors. Leah says that both weathering and erosion involve wind, water, and ice. Justin says that only weathering involves ice, and that erosion involves plants and animals. Who is correct?


A. Justin, because plants cause erosion too.
B. Justin, because erosion does not involve ice.
C. Leah, because she forgot to mention plants and animals.
D. Leah, because glaciers are ice that cause erosion too.

Answers

Answer: Justin is false and it is both bottom because plants and animals are helpless to erosion and we cause it by deforestation and weather does too

Explanation:

Justin, because plants cause erosion too factors. This was the statement are the correct. Thus, option (a) is correct.

What is erosion?

The geological process through which earthen elements are worn down and transferred by wind and water or water is known as erosion. The migration of nanoparticles away from their origins is referred to as erosion. Erosion is the loss of dirt, rock, or dissolved substances by surface processes.

According to the two students are the different in the studies. There was the based on the Leah are the said on the different in the concept and the Justin said into the different in the concept are the perception of the topic are the different. Justin was the correct because plants are the cause of erosion too factors.

As a result, the Justin, because plants cause erosion too factors. Therefore., option (a) is correct.

Learn more about on erosion, here:

https://brainly.com/question/3852201

#SPJ2

Why is the tensile strength of a material important to consider when building a structure? Answer in a one page essay!!!

Answers

The field of strength of materials, also called mechanics of materials, typically refers to various methods of calculating the stresses and strains in structural members, such as beams, columns, and shafts. The methods employed to predict the response of a structure under loading and its susceptibility to various failure modes takes into account the properties of the materials such as its yield strength, ultimate strength, Young's modulus, and Poisson's ratio. In addition, the mechanical element's macroscopic properties (geometric properties) such as its length, width, thickness, boundary constraints and abrupt changes in geometry such as holes are considered.

The theory began with the consideration of the behavior of one and two dimensional members of structures, whose states of stress can be approximated as two dimensional, and was then generalized to three dimensions to develop a more complete theory of the elastic and plastic behavior of materials. An important founding pioneer in mechanics of materials was

PDC Bank is working on creating an AI application that enables customers to send SMS to the AI application to allow banking activities from their registered ID. Jane, the project engineer, has taken bank customer data from the last few years from the server and is using it to train the ML to recognize and authenticate actual users and to ensure unauthorized users are barred from entering the application. Suppose the AI application has been compromised, and the reason has been identified as compromised data being used to improve the ML accuracy. What kind of attack is the PDC Bank application subjected to?

Answers

The kind of attack that the PDC Bank application is subjected to due to compromised data is: Adversarial artificial intelligence

Adversarial artificial intelligence is a form of attack on a neural network where a wrong algorithm is entered into the system to deceive the end user.

The aim of this machine learning method is to deceive the end user.

This is what happens to the PDC Bank when its data was compromised in the course of improving the machine learning accuracy.

Learn more about Adversarial artificial intelligence here:

https://brainly.com/question/22190244

Font
Paragraph
Styles
Editing
(1) What are the available methods for crop establishments in the field?
(2) Give a conceptual sketch for a seeder to establish soybean seeds in an
agricultural field of dry zone in Sri Lanka (Use software where
necessary/or a hand sketch with detail).
(3) Discuss the advantages of the seed dibbling mechanism and list the
crops that can be used dibbler.
A
(4) Discuss the key points to enhance agricultural productivity using the
fertilizer applicators.
(5) Calculations: Calibration of a seed drill
Number of furrows = 5
Spacing between the furrows = 8 cm
Diameter of the ground wheel = 0.65 m
Number of rotations of the ground wheel = 300
Weight of seed collected = 20 kg
Calculate the seed rate in kg/ha
The average number of seeds dropped per one revelation =6
Calculate the
(1) seed rate and
(ii)
hole to hole spacing

Answers

Answer:

1) Therefore it was so much more than one answer my head

Write a program that computes the square footage of a house given the dimensions of each room.Have the program ask the user how many rooms in the house and then request the dimensions of eachroom. Display the resulting total square footage.

Answers

#include

int main () {

printf("Program to calculate the square footage of the house.\n");

int total_rooms;

double length, width;

double total_square_footage = 0.0;

printf("Enter total number of rooms in the house:");

scanf("%d", &total_rooms);

for (int i = 0; i
printf("Enter the lenght and width of room %d: ", i+1);

scanf("%if %if", &lenght, &width);

total_square_footage += lenght*width;

}

printf("Total square footage of the house: %if\n", total_square_footage);

return 0;

}


Please mark it as brainliest answer:).

Text wrapping in Sheets means the text will be on more than 1 line within the cell.

Answers

Answer:

True

Explanation:

Had it on my quiz

Text wrapping in spreadsheets simply means the text will be on more than one (1) line within the cell.

What is a spreadsheet?

A spreadsheet can be defined as a file (document) which comprises cells arranged in a tabulated format (rows and columns) and it is typically used for formatting, arranging, analyzing, storing, calculating and sorting data on computer systems.

In Computer science, when a text in spreadsheets is formatted through text wrapping, the text will appear on more than one (1) line within the cell.

Read more on spreadsheets here: https://brainly.com/question/4965119

(2pts) In _______________, the pulse amplitude is made proportional to the amplitude of the modulating signal. pulse-amplitude modulation (PAM) pulse-position modulation (PPM) pulse-code modulation (PCM) pulse-width modulation (PWM)

Answers

Answer:

  (a)  pulse-amplitude modulation (PAM)

Explanation:

It should be no surprise that pulse amplitude is modulated in pulse-amplitude modulation (PAM).

The part of the circuit that converts electrical energy into other forms

Answers

Answer:

Alternator

Explanation:

A device which converts mechanical energy into electrical energy.

I hope it helps.

Thank you,Thank you udahfsdf

Answers

Answer: Um, a little feedback would help, cause I'm new but if you are thanking someone, let me know and i'll thank them for you, any other questions?

Explanation:

Label the following statements as either T (true) or F (false).
1) For Propane (C3H8) burning with theoretical amount of air, the air-fule ratio on the mole basis is 5.
2) The enthalpy of any substance at the standard reference state is 0.
3) 180% of theoretical air is equivalent to 80% of excess air.
4) The conservation of mass principle requires that the total number of moles on each side of a chemical reaction is equal.
5) The adiabatic flame temperature of methane (CH4) burning with pure oxygen and theoretical amount of air is the same, all other conditions being the same.

Answers

Answer:

1 its 1 bc you have to do it step by step

Explanation:

step by step

On a CNC lathe, which of the following axes specifies the distance of the cutting tool from the workpiece centerline?

Answers

Answer:

The axis of motion that is parallel to the spindle axis is always the Z-axis.

Explanation:

Z-Axis Which axis is which depends on the orientation of the spindle.

If the spindle is vertical (Figure 2.1), the Z-axis is vertical. Either the quill or the knee of a vertical spindle mill will move when a Z-axis command is executed.

This is the best answer I could give you, maybe you could show us a pic of the question so we see all the possible choices?

Other Questions
Why are Flowers considered as the reproductive part of a plant Rsum de A CHEVAL de Guy de Maupassant (rsum de environ 10 lignes) Answer all questions please and be quick, its very URGENT What religions did zheng he encounter on his journey? Question 5. One 1,5V battery runs a portable MP3 player that draws 5,7mA of currentfor about six hours before it runs out.a) What is the resistance If the portable MP3 player?b) How much power is dissipated in the portable MP3 player?c) Find the energy delivered by the portable MP3 player? Why did Shakespeare chose to begin the scene with Romeo talking before he learns of Juliets death? Explain what effect this has on the text Which option is most clearly an example of a medium?A. MeterB. PlotC. ParableD. Textbook I HAVE NO IDEA HOW TO DO THIS In a margin account, your customer's long market value is $22,000. The debit balance is $8,000. If the customer enters an order to purchase $12,000 of stock, the margin call will be What part of speech is everybody? Write a short paragraph about 4 sentences about what you should do to improve your English Who assassinated Medgar Evers? Why was he killed? Ryan works at a donut shop where he makes $10.25 per hour. He works on at the school bookstore where he makes $8.75 per hour to worked 20 hours last week and made $196, how many hours did he work at each place? MATHH QUESTION HELP. mesasuremtns You are driving your car around a roundabout when you get a flat tire and you decelerate at a constant rate to a stop. The diameter of the roundabout is 100m. It takes you 20 sec to come to a complete stop. While slowing down, you continue to drive in a circle and you stop halfway around the loop. What must your speed have been before the pop? Solve for b.b - 7 = -20 A. b = -27 B. b = -13 C. b = 13 D. b = 27 12. How did the French military respond to the efficient German mobilization of its troops?Mint ubon confronted by the A catering company orders 150 lb of fresh clams for a banquet serving 100 people, and 30 lb of clams for dinner party of 20 people. Determine the standard number of clams per serving. Solve for x x/6=101) x=102) x=603) x=44) x=16 After a solution has been selected and planned, the next step is to __________. A. Evaluate the solution B. Analyze the solution C. Monitor the solutions progress D. Implement the solution.