The moon Phobos orbits Mars
(mass = 6.42 x 1023 kg) at
a distance
of 9.38 x 106 m. What is its period of
orbit?
[?]s

Answers

Answer 1

Answer:

Explanation:

We are basically needing to solve for the time in the equation d = rt, where d is the distance around Mars (aka the circumference), r is the velocity, and t is time. We need to find the circumference and the velocity. We will begin with the velocity.

Because the gravitational attraction between Phobos and Mars provides the centripetal acceleration necessary to keep Phobos in its (sort of) circular path, the equation we use for this is:

[tex]F_g=F_c[/tex] which says that Force supplied by gravity is equal to the centripetal force. Expanding that:

[tex]\frac{Gm_{Phobos}m_{Mars}}{r^2}=\frac{m_{Phobos}v^2}{r}[/tex]

When we move that around mathematically to solve for the velocity value, what we end up with is:

[tex]v=\sqrt{\frac{Gm_{Mars}}{r}[/tex] and filling in:

[tex]v=\sqrt{\frac{(6.67*10^{-11})(6.42*10^{23})}{9.38*10^6} }[/tex] and we get that

v = 2100 m/s

Now for the circumference:

C = 2πr and

C = 2(3.1415)(9.38 × 10⁶) so

C = 5.9 × 10⁷

Putting that all together in the C = vT equation:

5.9 × 10⁷ = 2100T so

T = 2.8 × 10⁴ sec or 7.8 hours


Related Questions

on which principle does a thermometer is based​

Answers

Answer:

thermal expansion

hope it helps

Which data set has the largest range?
O A. 1, 5, 2, 4, 3, 5
O B. 5, 6, 4, 5, 6, 4
O C. 8, 9, 1, 2, 3, 4
O D. 3, 9, 5, 7, 3, 6

Answers

Answer:

D 3, 9, 5, 7, 3, 6

Explanation:

range is the difference between the highest and the lowest value and 9 is the highest while 3 is the lowest, if u subtract them u will get 6. while for the first u will get 4 and the second u will get 2. so the answer is D

A vector consists both?

Answers

Answer:

magnitude and a direction

Explanation:

Which of the following is true for gravitational force?

Group of answer choices
Decreases with decrease in distance

Increases with increase in distance

Decreases with increase in mass

Increases with increase in mass

Answers

Answer:

The gravitational force b) Increases with increase in mass.

Explanation:

The gravitational force between two objects is given by

F=G\frac{m_1 m_2}{r^2}F=Gr2m1m2

where

G is the gravitational constant

m1, m2 are the masses of the two objects

r is the separation between the objects

From the equation, we notice that:

- The force is proportional to the masses, m1 and m2: so, if the masses increase, the force will increase, and if the masses decrease, the force will decrease

- The force is inversely proportional to the distance between the masses, r: so, if the distance increases,  the force will decreases, and if the distance decreases , the force will increases

Therefore, the correct options is only:

Increases with increase in mass

Answer: The answer is b increases in increase of mass because the heavier the object is the more gravitional pull it will have.

Explanation: Which of the following is true for gravitational force?

Group of answer choices

Decreases with decrease in distance

Increases with increase in distance

Decreases with increase in mass

Increases with increase in mass

True or false? Gas pressure is caused by molecules in a gas colliding with the walls of their container.

Answers

Answer:True

The number of molecules hitting the unit surface per unit time increasethe gas pressure increases.

Answer very true yep

What do scientists theorize about the origins of the Moon? Choose the most accepted explanation.

Answers

Answer:

What is most widely accepted today is a the giant-impact theory. It proposes that the Moon formed during a collision between the Earth and another small planet, about the size of Mars. The debris from this impact collected in an orbit around Earth to form the Moon.

1. What do machines do? Change the amount of force one exerts. Decrease the amount of work that is done. Increase the amount of work that is done. Eliminate friction.​

Answers

Answer: increase the amount of work that is done?

Explanation:

I’m not entirely sure to be honest but I’ll just use my logic here. Machines are made to increase efficiency and production. Machines are made to save time and energy as a pose to human work. So several machines can mass produce a lot of things and keep business booming. I’m not very good at explaining things but I hope this makes sense eventually.

A
person tries to lift each object with a force of 18 N, upward. Which
statement is supported by the data in the table?
A. Objects 1 and 2 will not move, and objects 3 and 4 will accelerate
upward.
B. None of the objects will move, but the normal force on all of the
objects will increase.
O C. All of the objects will move, and object 2 will accelerate upward
the fastest.
D. Objects 1 and 2 will move downward, and objects 3 and 4 will
move upward.

Answers

Answer: A. Objects 1 and 2 will not move, and objects 3 and 4 will accelerate upward.

Explanation:

Because objects 1 and 2 require more force in order to move, they will stay motionless.

Correct me if I am incorrect.

What is the speed of sound through air?
200 meters per second
335 meters per second
400 meters per second
600 meters per second

Answers

331.29 metres (1,086.9 feet) per

how does the function of the parts of the system contribute to its function as a whole


plsss help i need it rn i’ll give brainliest

Answers

Answer and explanation: Just as the organs in an organ system work together to accomplish their task, so the different organ systems also cooperate to keep the body running. For example, the respiratory system and the circulatory system work closely together to deliver oxygen to cells and to get rid of the carbon dioxide the cells produce.

A 2.6 kg mass attached to a light string rotates on a horizontal,
frictionless table. The radius of the circle is 0.525 m, and the
string can support a mass of 17.9 kg before breaking. The
acceleration of gravity is 9.8m/s2. What maximum speed can
the mass have before the string breaks?

Answers

The maximum speed the mass can have before it breaks is 2.27 m/s.

The given parameters:

maximum mass the string can support before breaking, m = 17.9 kgradius of the circle, r = 0.525 m

The maximum speed the mass can have before it breaks is calculated as follows;

[tex]T = ma_c\\\\Mg = \frac{Mv^2}{r} \\\\v^2 = rg\\\\v = \sqrt{rg} \\\\v_{max} = \sqrt{0.525 \times 9.8} \\\\v_{max} = 2.27 \ m/s[/tex]

Thus, the maximum speed the mass can have before it breaks is 2.27 m/s.

Learn more about maximum speed of horizontal circle here:https://brainly.com/question/21971127

what two properties change when light is refracted

Answers

Answer:

Refraction is merely one of several possible boundary behaviors by which a light wave could behave when it encounters a new medium or an obstacle in its path. The transmission of light across a boundary between two media is accompanied by a change in both the speed and wavelength of the wave.

Explanation:

Please I need help with this ❤️ ?

Answers

Answer:

Compound 'A' C5H12 does not react with phenyl hydrazine. Oxidation of 'A' with K2Cr2o7,/H" gives B' (c5H10o). Compound 'B' reacts with phenyl hydrazine but does not give Tollen's test. The

Imagine that you are going to visit your friend. Before you get there, you decide to stop at the variety store. If you walk 200 m (N) from your home to the store, and then travel 600 m [S] to your friend's house, what is your total displacement?​

Answers

Answer:

400m

Explanation:

Brainliest? :))

Let your initial displacement from your home to the store be

Dd

>

1 and your displacement from the store to your friend’s house

be Dd

>

2.

Given: Dd

>

1 = 200 m [N]; Dd

>

2 = 600 m [S]

Required: Dd

>

T

Analysis: Dd

>

T 5 Dd

>

1 1 Dd

>

2

Solution: Figure 6 shows the given vectors, with the tip of Dd

>

1

joined to the tail of Dd

>

2. The resultant vector Dd

>

T is drawn in red,

from the tail of Dd

>

1 to the tip of Dd

>

2. The direction of Dd

>

T is [S].

Dd

>

T measures 4 cm in length in Figure 6, so using the scale of

1 cm : 100 m, the actual magnitude of Dd

>

T is 400 m.

Statement: Relative to your starting point at your home, your

total displacement is 400 m [S].

What is the surface temperature of Sirius B in Kelvins?

Answers

Answer: The surface temperature of Sirius B is 25,200 Kelvins(K).

Explanation: You would think Sirius would have a surface temperature of 9,940 Fahrenheit. That is somewhat correct, but Sirius is a binary star consisting of a main-sequence star of spectral type A0 or A1, termed Sirius A, and a faint white dwarf companion of spectral type DA2, termed Sirius B. Sirius, Sirius A, and Sirius B, are all different stars. Sirius A has a temperature of 9,940 Kelvins, but Sirius B has a temperature of 25,200 Kelvins(K).

That would be 9,940 kelvins (K)

Hope it helps! :D

When the mass of the cylinder increased by a factor of 3, from 1. 0 kg to 3. 0 kg, what happened to the cylindera's gravitational potential energy? It decreased by a factor of 3. It decreased by a factor of 2. It increased by a factor of 2. It increased by a factor of 3.

Answers

The mass of the cylinder increased by a factor of 3, the  gravitational potential energy increases by a factor of 3.

The given parameters:

Initial mass of the cylinder, m₁ = 1.0 kgFinal mass of the cylinder, m₂ = 3.0 kg

The gravitational potential energy of an object is calculated as follows;

P.E = mgh

where;

m is the mass

g is acceleration due to gravity

h is the height of the cylinder

when the mass = 1 kg

P.E = 1 x g x h

P.E = gh

when the mass = 3 kg

P.E = 3 x gh

P.E = 3gh

Thus, when the mass of the cylinder increased by a factor of 3, the  gravitational potential energy increases by a factor of 3.

Learn more about gravitational potential energy here: https://brainly.com/question/19768887

In physics, power is __________.
a. how fast something does work
b. how much force something can apply
c. how strong something is
d. how much work something can do

Answers

Answer:

The answer is A

Explanation:

Answer:

A. How fast something works.

Explanation:

Power in physics is the rate at which work is done.

Which statement best explains why a wet saw used to cut through a fine optical crystals is constantly lubricated with oil

Answers

The major reason why a wet saw that is used in cutting optical crystals is constantly lubricated with oil is largely due to friction, lubrication decreases friction and minimises the increase of internal energy.

Friction is basically the coming together of two parts that rubs against each other, it causes heat and lead to  deterioration of surfaces, it can also lead to wear and tear.

Although, despite it down side, friction is desire-able in most applications

e.g the brake system of vehicles, and if not for friction, we humans cannot walk without falling

learn more:

https://brainly.com/question/24338873

Give 4 facts about the alkali metals

Answers

Answer:

there very old

Explanation:

The power ratings of several motors are listed in the table. A 2 column table with 3 rows. The first column is labeled motor with entries, brand X, brand Y, brand Z. The second column is labeled Power in watts with entries 7460, 7650, 7580. An advertising agency writes marketing material for a new motor (Brand W) that has a power rating of 7,640 W. Which statement comparing the motors can they truthfully use? Brand W motor can finish any job faster than Brand Y motor can. There’s not a more powerful motor available. Brand W motor does more work each second than Brand X or Brand Z. Every second, Brand W motor does 7,640 N of your toughest work.

Answers

The statement  " Brand-W motor does 7,640 N of your toughest work." can be truthfully use.

Advertisement Rules:

An advertiser can not compare its products using the other companies name.An advertiser can not make the false statement in its advertisement.

Here, the brand-W has the power rating of  7,640 W that is less than brand-Y. Advertiser cannot compare his brand using the name of Brand X, Y, or Z.

Therefore, the statement  " Brand-W motor does 7,640 N of your toughest work." can be truthfully use.

To know more about Advertisement Rules:

https://brainly.com/question/13679377

Answer:

The correct answer is C, Brand W motor does more work each second than Brand X or Brand Z.

If an atom has two protons and three electrons, then the atom is-?
A. positively charged.
B. negatively charged.
C. radioactive.
D. neutral.

Answers

Before solving this question, one has to remember the following facts.Protons are positively charged particles in an atom.Electrons are negatively charged particles in an atom.If protons are greater than electrons, then the atom is positively charged.If electrons are greater than protons, then the atom is negatively charged.If both are equal, then the atom is in neutral state.Here, the number of protons = 2Number of electrons = 3.Since, number of protons < number of electronsTherefore, the atom is negatively charged.

Hope you could get an idea from here.

Doubt clarification - use comment section.

How many neutrons are in K-37?

Answers

Answer:

18 neutrons

Explanation:

Potassium is nuimber 19 on periodic table, so when the mass equals 37, you simply subtract 37-19 to get 18

potassium usually has a mass of 39, so when we have potassium 37, it is two less neutrons than normal

PLEASE HELP!! WILL GIVE BRAINLIEST IF YOU SHOW WORK. ITS DUE SOON :(

If the radius of the CD below is 6.0 cm and the angular velocity is 5.0 rad/s, what is its angular displacement in 2.0 s? What is it's Linear displacement on the edge in 2.0 s? Please show work :(

Answers

Answer:

theta = ω t = 5.0 / sec * 2 s = 10 rad

S = R theta = 6 cm * 10 rad = 60 cm

The angular displacement of CD if the radius of the CD below is 6.0 cm and the angular velocity is 5.0 rad/s, is 10 rad, and the linear displacement is 60 cm.

What is velocity?

When anything is moving, its velocity tells us how quickly that something's location is changing from a certain vantage point and as measured by a particular unit of time.

If a point moves along a path and covers a certain distance in a predetermined amount of time, its average speed over that period of time is equal to the distance covered divided by the travel time. A train traveling 100 kilometers in two hours, for instance, is doing it at an average speed of 50 km/h.

Given:

The radius of the CD, r = 6 cm,

The angular velocity, v = 5 rad / sec

The time, t = 2 sec,

Calculate the angular displacement by the formula given below,

[tex]v = s / t[/tex]

5 = s / 2

s = 10 rad,

Calculate the linear displacement by the formula given below,

Linear displacement = [tex]r\ s[/tex]

Linear displacement = 6 × 10

Linear displacement = 60 cm

Therefore, the angular displacement of CD if the radius of the CD below is 6.0 cm and the angular velocity is 5.0 rad/s, is 10 rad, and the linear displacement is 60 cm.

To know more about velocity:

https://brainly.com/question/19979064

#SPJ2

1. A student adds water and sugar to a jar and seals the jar so that nothing can get in or out. The
student then finds the mass of the jar containing the water and sugar. After some sugar dissolves, the
student finds the mass of the jar and its contents again.
Water
Sugar
and
Water
Sugar
Sugar
Before
After
Vhat will happen to the mass of the jar containing the water and sugar after some of the sugar
issolves?
a. The mass will stay the same
b. The mass will increase
c. The mass will decrease
The moon will donend on how much sunar dissolves

Answers

Answer:

The mass will stay the same throughout time

An object with a mass of 5 kg is accelerated from rest by a 60 N*s impulse. What is the change in the object's velocity?

Answers

Hi there!

Using the Impulse-Momentum theorem:

I = Δp = mΔv

Where:

I = Impulse (Ns)

m = mass of object (kg)

Δv = change in velocity (vf - vi, m/s)

Plug in the given values and solve:

60 = 5Δv

Δv = 12 m/s

8. Placing your vehicle between the pilot/escort vehicle and an oversize/overweight vehicle can be dangerous.A. TrueB. False

Answers

Answer:

A because that's the answer

4) What is the kinetic energy of a 5 kg object moving ot a velocity of 25 m/s?
Help me please I’m confused

Answers

Kinetic Energy (KE)
Mass(m)
Velocity(V)

KE= 1/2 (m) (V^2)
KE=(.5)(5kg)(25^2m/s)
KE= (.5)(5kg)(625m/s^2)
KE= (.5)(3125kgm/s^2)
KE=1562.5 (kgm/(s^2))

What are some of the dangers that volcanoes pose to human populations? a. Destruction of property from lava flow b. Destruction from mud flows c. Lung problems from ash and toxic gases d. All of the above.

Answers

Destruction of property from lava flow, destruction from mud flows and lung problems from ash and toxic gases are all some of the dangers that volcanoes pose to human populations.

Volcanoes refer to an opening that appears on the earth's surface and serves as a vent for lava, volcanic ash, and gases. These could lead to a fire outbreak in mountains sometimes.

The following are dangers posed by volcanoes pose to human populations;

Destruction of property from lava flow Destruction from mud flowsLung problems from ash and toxic gases

Hence, the correct answer to the question is "all of the above".

Learn more: https://brainly.com/question/17638582

Answer:

D

Explanation:

EDGE 2021

The force involved in falling of an apple from a tree is known as? (a) Magnetic force (b) electrostatic force (c) Contact force (d) gravitational force​

Answers

Answer:

it is known as gravitational force

Answer:

Gravitational force.

Explanation:

Gravitational force is the force that allows objects to drop which is how the apple dropped.

Why does the size of a white dwarf affect its visual luminosity?

Answers

Answer:

A typical white dwarf has a carbon and oxygen mass similar to the Sun, but is much smaller in size (similar to the Earth). It is much hotter (25,000 K), but because of its small size its luminosity is low. ... Some very nearby white dwarf stars can be observed directly through telescopes, though they are extremely faint.

Explanation:

Other Questions
Solve the inequality 2x 22 < -8. PartComplete the table to explain how Shakespeare uses different aspects of the setting to develop the themes in the Romeoand Juliet.Aspect of SettingVerona, Italy, in the Middle Ages, during the time of afeud between powerful familiesthe balcony and the orchardnighttimeHow It Develop the Themes A mixture of methane and carbon dioxide gases contains methane at a partial pressure of 431 mm Hg and carbon dioxide at apartial pressure of 504 mm Hg. What is the mole fraction of each gas in the mixture?XCHAXc02 find the quadratic equations whose roots are 3 and -4 Delta math need help what did you think of the university after five year _____ theory identified seven primary abilitites. They are inductive reasoning, word fluency, perceptual ability, verbal comprehension, spatial visualization, numerical ability, and associative memory. A speed training service wants to explore the effectiveness of some of the classes offered to their clients. They randomly select 300 high school athletes and record their 50-meter dash time. The 300 high school athletes are then randomly assigned to three groups with 100 in each. One hundred athletes will take a circuit training class, 100 athletes will take an interval training class, and 100 athletes will take a plyometrics training class. At the end of 10 weeks of taking these classes, their 50-meter dash time will be recorded a second time. Their times will be analyzed to see which class showed the greatest overall improvement in times.Select all the sentences that correctly identify the components of the experiment.The experimental units are subjects.The subjects are the 50 athletes.There is one treatment, the 50-meter dash.There are three treatments.One treatment is a circuit training class.The factor is the type of class.There are 10 levels of the factor. Louis Vuitton decides to invest $80,000,000 into a shoe factory in Milan from its money market account. The money market account was earning 1% in interest per year or $800,000. Louis Vuitton could have also earned $200,000 from investing the $80,000,000 in a handbag factory. What is its opportunity cost for Louis Vuitton based off of the information in presented this situation?a. $200,000b. $1,000,000c. $80,000,000d. $800,000 Which of the following best describes the proper use of a signal phrase? A signal phrase may appear before, in the middle, or after researched information you are sharing. A signal phrase should appear before the researched information you are sharing. A signal phrase should appear in the middle of the researched information you are sharing. A signal phrase should appear after the researched information you are sharing. In need of help asaappppp what is the solution? Amelia is calculating the density of soccer balls in a bag. She knows the number of balls in the bag and the volume of the bag. Which of the following formulas can be used to calculate the density of balls in the bag? Density = volume of bag over number of balls Volume of shelf = density over number of balls Density = number of balls over volume of bag Number of books = density over volume of bag What does a scientist get instead of big money The parts of the process cost summary include:______.a. cost charged to each job. b. costs charged to departments. c. cost assignment and reconciliation. d. equivalent units of production. A campus deli serves 200 customers over its busy lunch period from 11:00 a.m. to 1:00 p.m. A quick count of the number of customers waiting in line and being served by the sandwich makers shows that an average of 10 customers are in process at any point in time. The average amount of time that a customer spends in process is _______ minutes (round to the nearest integer). a motercycle can travel 60 miles per gallon. approximently how many gallons of fuel will the motercycle need to travel 40 km[1 mile = 1.6km]a: 0.04 b: 0.08c: 0.20d: 0.42 You are enrolling swimmers in a study on lung capacity. You want 25% of your sample to be those who compete at 100m or less distances and 50% to be swimmers who compete at 100m-500m distances and 25% to be swimmers who compete at >500m distances. You begin enrolling for your study at 5am at the pool. By 9 AM you have all of your 100-500m swimmers enrolled, and all of your >500m swimmers enrolled. This is an example of what type of sampling method It's already too late to plan ____ additional nuclear plants by 1999. A.over B.at C.for D.on Camper's Edge Factory produces two products: canopies and tents. The total factory overhead is budgeted at $750,000 for the year, divided between two departments ----Cutting, $350,000, and Sewing, $400,000. Each canopy requires 2 direct labor hours in Cutting and 1 direct labor hour in Sewing. Each tent requires 1 direct labor hour in Cutting and 6 direct labor hours in Sewing. Production for the year is budgeted for 20,000 canopies and 10,000 tents.Required:a. Determine the total number of budgeted direct labor hours for the year in each department.b. Determine the factory overhead allocated per unit of each product using the department factory overhead allocation rates using direct labor hours as the base.