Convergent boundaries are caused by the collision of two plates and can originate volcanoes. Transforming boundaries produce fractures by displacement. The correct option is D. Type A boundaries have fewer volcanoes.
----------------------------------------
The crust -the outermost layer of the earth- is divided into many plates that move over the mantle.
These plates are limited by three types of ridges or borders that differ in the movement they produce.
Boundaries types:
I. Divergent:
This boundary occurs when two plates separate and molten material rises from the mantle creating a new crust. The hot material creates a new seabed between the separating plates, expanding the sea bottom.II. Convergent.
Collision area between two plates. Two oceanic plates might collide, or one oceanic plate with a continental one. In this last case, the oceanic crust sinks under the continental plate, and magma rises to the surface by crevices. The thicker and older plate subduces under the other plate. Collisions create volcanic arches and continental arches.
III. Transforming.
The plates slide laterally with each other, and they are usually called faults. It is associated, in general, with the oceanic ridge, although it might also occur in the continental plate. No rocky material is either destroyed or formed. When the plates move and produce a displacement of one transforming limits from side to side, earthquakes occur. The movement breaks the crust and originates pronounced fractures.
In the attached images, we can see
image A representing transforming boundaries, image B representing Convergent boundaries.Image B is the one that can originate volcanoes because transforming boundaries only produce fractures.
So the correct option would be D.
--------------------------------
Learn more about convergent, divergent and transforming boundaries at
https://brainly.com/question/2437823?referrer=searchResults
https://brainly.com/question/2507413?referrer=searchResults
https://brainly.com/question/5082756?referrer=searchResults
https://brainly.com/question/16962517?referrer=searchResults
https://brainly.com/question/16660809?referrer=searchResults
https://brainly.com/question/11162339?referrer=searchResults
https://brainly.com/question/13311455?referrer=searchResults
Answer:
d
Explanation:
20.In case the conductor is a heating appliance, then this energy(w) is converted into heat(H) i.e
A. w=H C. w=I2Rt
B. w=VIt D. all of above
Answer:
not sure just need points
Explanation:
a+b+c
Describe an experiment to find the volume of an irregular- shaped ston
One way to measure the volume of any irregular object (in your case, a stone) is to submerge it completely under water and measure the change in the height of the water level. This change in the water level (let's say it goes from 50 mL to 65 mL) indicates that the stone has a volume of 15 mL .
A rocket travels 1.3 km in 62 ms. What is its average speed in m⋅s−1? Do not give your answer in scientific notation. The answer should be given to 2 significant figures.
Answer:
Average speed = 0.35 m/s
Explanation:
Given the following data;
Distance = 1.3 Km
Time = 62 minutes
To find the average speed in m/s;
First of all, we would convert the quantities to their standard unit (S.I) of measurement;
Conversion:
1.3 kilometres to meters = 1.3 * 1000 = 1300 meters
For time;
1 minute = 60 seconds
62 minutes = X
Cross-multiplying, we have;
X = 62 * 60
X = 3720 seconds
Now, we can calculate the average speed in m/s using the formula;
[tex] Speed = \frac {distance}{time} [/tex]
[tex] Speed = \frac {1300}{3720} [/tex]
Average speed = 0.35 m/s
In isoelectric focusing gel electrophoresis a. there is a pH gradient that parallels the electric field gradient b. particular care must be taken to ensure the same pH along the length of the gel c. the electric current is allowed to fluctuate d. the electric circuits of the apparatus must be very well insulated
Answer:
a. there is a pH gradient that parallels the electric field gradient.
Explanation:
Gel electrophoresis is a technique used to separate DNA fragments according to their size. DNA samples are loaded in the wells and then electric current is applied to pull the DNA fragments out from the gel. Isoelectric gel electrophoresis is a process in which negatively charged DNA fragments are separated from the gel.
Please help me with these I might need more than only 1 person to answer
Explanation:
a) copper
b) olive oil
Hope it helps✌✌
Describe the laws of liquid pressure and explain the term fluid. (Please try to give the correct answer 'coz it's urgent!)
Answer:
The laws of liquid pressure are: ... The liquid pressure at a point inside the liquid is same in all directions. The liquid pressure at a point inside the liquid is directly proportional to the depth of that point from the free surface of liquid. The pressure of liquid at same depth is different for different liquids
Answer:
The laws of liquid pressure:
The pressure that is inside the liquid rises with the intensity from the surface of a liquid.
The term fluid:
Fluid is basically liquid and a substance that is known to have no certain shape. The opposite of the term fluid would be solid.
what is field selection process
It is a process of offering jobs to desired candidates and offering jobs to the desired applicant.
The spectra of most galaxies show redshifts. This means that their spectral lines Group of answer choices always are in the red part of the visible spectrum. have wavelengths that are longer than normal. have a higher intensity in the red part of the spectrum. have wavelengths that are shorter than normal.
have a higher intensity in the red part of the spectrum
Because of the Doppler effect, the spectra of most galaxies show redshifts. This means that their spectral lines Group of answer choices always are in the red part of the visible spectrum
Most galaxies' spectra have been redshifted, which means that their spectral lines are now pushed away from their normal or rest wavelengths and towards longer wavelengths. When an object travels away from an observer, the Doppler effect causes the shift phenomenon.
The Big Bang hypothesis and the concept of the expanding universe, show that galaxies are moving away from us, observed from the redshift lines.
The waves' apparent wavelengths shift as a result, changing the color of light waves or the pitch of sound waves.
Hence, because of the Doppler effect, the spectra of most galaxies show redshifts. This means that their spectral lines Group of answer choices always are in the red part of the visible spectrum.
To learn more about the Doppler effect, here:
https://brainly.com/question/28106478
#SPJ6
.........도움......
Is this correct? (the option is marked)
Answer:
sorry I don't understand this language
Động vật nào sau đây máu đi nuôi cơ thể không pha trộn giữa máu giàu O2 và máu giàu CO2?
A.
Bò sát, chim, thú
B.
Cá, bò sát, chim
C.
Cá, lưỡng cư, bò sát
D.
Cá, chim, thú
Answer:
D
Explanation:
Cá xương, chim, thú, cá sấu không có sự pha trộn máu giàu O2 và máu giàu CO2 ở tim vì tim cá có 2 ngăn, tim các loài chim, thú, cá sấu có 4 ngăn
2) Define volume. Explain in detail how can volume of irregular object be determined?
PLZ HELP NEED THIS RN
The three dimensional space of a body is called volume
What are the units for speed?
O A. km/s2
O B. m/s2
O C. m/s2
O D. m/s
Answer:
Explanation:
The only one that doesn't have a time unit that is squared is the one that is a label for speed or velocity. Acceleration has a label with the time unit squared, like m/s/s. Choice D is the only unit for speed/velocity.
Answer: D
Explanation: metres per second (m/s)
a.
quuntlity.
Answer the following questions.
What is force? Write down its SI unit.
b. Name
any five types of force.
c.
What is pulling force? Give any two examples.
d. What is centripetal force? Give one example of centrifugal force.
What is gravitational force? Give two examples.
f. What is magnetic force? How is this force useful to us?
Answer:
1) Force is the action of pull or push that changes or tends to change the position of a body. Its SI unit is newton.
2) The types of force are:
• Pulling and Pushing force
• Frictional force
• Gravitational force
•Muscular force
• Centripetal and Centrifugal force
f an object has a mass of 200 kg and a weight of 1000 N, what is g?
Answer:
g = 5 m/s square
Explanation:
Weight(W), Mass(m), Gravity(g)
W = mg
1,000N = 200g
g = 1000/200
g = 5 m/s square
Question 3 of 10
Which image shows an example of the strong nuclear force in
action?
A.
B.
C.
D.
Answer: The answer is B
Explanation:
There are 4 fundamental forces that hold matter together.
- Gravitational Force
- Electromagnetic Force
- Strong Nuclear Force
- Weak Nuclear Force
We have barely just scratched the info about nuclear forces but the reason why B is the answer to the question is that Strong nuclear force actually holds the protons and neutrons together in the nucleus of an atom, much like the picture in B.
Answer: B
Explanation:
Electricity flows from
positive to positive
negative to positive
negative to negative
positive to negative
Answer:
is it from positive to negative am I right tell me if I am wrong
Answer:
positive to negative
The flow of electric current is similar to the flow of water which is from higher level to lower level.
The electric current flow from higher potential region(positive* low concentration of electron) to lower potential region(negative*high concentration of electron)
Algunos estudiantes de tu promoción consideran que se debería aumentar el número de horas semanales de Educación Física. Otros consideran que el número de horas debería mantenerse. Escribe un artículo de opinión en el que presentes tu punto de vista sobre este tema y al menos tres razones que justifiquen tu postura. Tu artículo se publicará en el periódico escolar La Voz.
una ayuda plis :c
La respuesta correcta para esta pregunta abierta es la siguiente.
Te compartimos las tres ideas que te pueden ayudar para hacer tu artículo.
Título:
La Educación Física, una prioridad para las escuelas.
Existe una frase milenaria que se le atribuye a los griegos que dice "Mente sana en cuerpo sano."
Y es muy cierta.
Las escuelas deberían considerar seriamente aumentar el número de horas semanales para la impartición de la educación física por las siguientes razones.
1.- La educación física es vital para el desarrollo físico del estudiante. Desde los grados más básicos, las escuelas deberían fortalecer la enseñanza de la educación física por motivos de salud, y dejar este buen hábito en los alumnos para toda la vida.
2.- La educación física, mejora el rendimiento académico ya que ayuda oxigenando los músculos, fortaleciendo el cerebro para que pueda concentrase mejor, despeja a los alumnos de tal forma que puedan regresar a los salones e clase más "despiertos."
3.- La educación física sirve para introducir la importancia de practicar deporte toda la vida, y hacerlo en la etapa escolar a través de equipos deportivos como el Futbol Americano, el beisbol, el basquetbol, el volibol, el soccer, y otros tantos.
Este idea del trabajo en equipo a través del deporte es muy importante para desarrollar habilidades como el liderazgo, el compromiso, la constancia y el superar la adversidad.
El profesor de educación física debe enseñarte la forma correcta de respirar cuando haces ejercicio, la importancia de la relajación del cuerpo para iniciar una actividad. El profesor debe hacer énfasis en la etapa del calentamiento y el estiramiento para preparar al cuerpo antes de realizar el ejercicio. Así como muchas otras enseñanzas.
Por esa razón, las escuelas deberían considerar seriamente la posibilidad de aumentar las horas de educación física por semana.
Write down the conservation of momentum?
Please help
I can’t get this right
Answer:
6,76 x 10^-7 T.
Explanation:
The Magnetic field formula for a wire is B=(μ x I)/2πd , where μ (=4π x 10^-7 Tm/A) is the permeability, I is the current and d is the distance.
7) A ball is thrown upward at an initial velocity of 8.2 m/s, from a height of 1.8 meters above the ground. The height of the ball h, in metres can be represented, after t seconds, is modelled by the equation h = –4.8t² + 8.2t + 1.8. (a) Determine the height of the ball after 1.7 seconds.
[tex] \\ \tt \longmapsto \: h = - 4.8 {t}^{2} + 8.2t + 1.8 \\ \\ \tt \longmapsto \: h = - 4.8(1.7) {}^{2} + 8.2 \times 1.7 + 1.8 \\ \\ \tt \longmapsto \: - 4.8 \times 2.89 + 1.39 + 1.8 \\ \\ \tt \longmapsto \: 13.8 + 1.39 + 1.8 \\ \\ \tt \longmapsto \: 17.06[/tex]
state any two effects of gravitational force
Answer:
The effect of gravity extends from each object out into space in all directions, and for an infinite distance. However, the strength of the gravitational force reduces quickly with distance. Humans are never aware of the Sun's gravity pulling them because the pull is so small at the distance between the Earth and Sun.
Answer:
The Earth's gravitational force accelerates objects when they fall. It constantly pulls, and the objects constantly speed up.
Explanation:
matter can enter and exit which of the following systems?
A. isolated only
B. open only
C. both open and isolated
D. Both closed and isolated
A car has a mass of 2000 kg. While it is traveling along a perfectly flat road, it goes around an unbanked turn that has a radius of 40.0 m. The coefficient of static friction between the car tires and the road is 0.500. The car travels successfully around the turn at a constant speed of 10.0 m/s. Calculate the magnitude of the car's acceleration as it goes around the turn. _______ m/s^2
Answer:
2.5 m/s²
Explanation:
The given parameters are;
The mass of the car, m = 2,000 kg
The radius of the car, r = 40.0 m
The coefficient of friction between the car tires and the road, μ = 0.500
The constant speed with which the car moves, v = 10.0 m/s
The normal reaction of the road on the car, N = The weight of the car;
∴ N = m × g
Where;
g = The acceleration due to gravity ≈ 9.81 m/s²
N ≈ 2,000 kg × 9.81 m/s² = 19,620 N
The frictional force, [tex]F_f[/tex] = μ × N
The centripetal force, [tex]F_c[/tex] = m·v²/r
The car moves without slipping when [tex]F_f[/tex] = [tex]F_c[/tex]
Therefore, [tex]F_f[/tex] = 0.500 × 19,620 N = 2,000 kg × [tex]v_{max}[/tex]²/40.0 m
∴ [tex]v_{max}[/tex] = √(0.500 × 19,620 N × 40.0 m/2,000 kg) ≈ 14.007 m/s
Therefore, the velocity with which the car moves, v < [tex]v_{max}[/tex]
The cars centripetal acceleration, [tex]a_c[/tex] = v²/r
∴ [tex]a_c[/tex] = (10.0 m/s)²/40.0 m = 2.5 m/s²
The cars centripetal acceleration as it goes round the turn, [tex]a_c[/tex] = 2.5 m/s².
Write the dimension of a / b in the x = at + bt2. Where x is the distance and t is the time?
The dimension of a/b where x is the distance and t is the time is T
Given the expression
x = at + bt²
where
x is the distance
t is the time
Based on the homogeneity principle, the expression on the left-hand side must be equal to that on the right. Hence;
x = at
[tex]a = \frac{x}{t}[/tex]
Since x is the distance and distance is measured in metres, the dimension equivalent will be the length 'L'
Since t is the time and time is measured in seconds, the dimension equivalent will be the seconds 'T'
[tex]a=\frac{L}{T}[/tex]
Similarly;
x = bt²
[tex]b=\frac{x}{t^2}\\b=\frac{L}{T^2}[/tex]
Next is to get a/b;
[tex]\frac{a}{b} = \frac{L}{T} \div \frac{L}{T^2}\\\frac{a}{b} = \frac{L}{T}*\frac{T^2}{L} \\\frac{a}{b} =\frac{T^2}{T}\\\frac{a}{b} =T[/tex]
Hence the dimension of a/b is T
Hai điện tích đặt cách nhau một khoảng R trong không khí thì lực tương tác
giữa chúng là 2.10−3N. Nếu khoảng cách đó mà đặt trong môi trường điện môi thì
lực tương tác giữa chúng là 10−3N. Để lực tương tác giữa hai điện tích đó khi đặt
trong môi trường điện môi bằng lực tương tác giữa hai điện tích đó khi đặt trong
không khí thì khoảng cách giữa 2 điện tích là bao nhiêu?
Which of the following can be correct units for acceleration?
A. miles/hr/m
B. Km/s/hr
C. m/s/m
D. km/m/s
Answer:
B. Km/s/hr
Explanation:
Please please helpjejejnebwbww
Answer:
C. 540 N
Explanation:
Let suppose that system formed by the athlete and the load are in equilibrium. By Newton's Laws of Motion, we use the moment equation with respect to the feet of the athlete to determine the upward force exerted by his two arms:
[tex]\Sigma M = -F\cdot r_{1} + m_{L}\cdot g \cdot r_{2} + m_{A}\cdot g \cdot r_{3} = 0[/tex]
[tex]F = \frac{(m_{L}\cdot r_{2} + m_{A}\cdot r_{3})\cdot g}{r_{1}}[/tex] (1)
Where:
[tex]m_{L}[/tex] - Mass of the load, in kilograms.
[tex]m_{A}[/tex] - Mass of the athlete, in kilograms.
[tex]g[/tex] - Gravitational acceleration, in meters per square second.
[tex]r_{1}[/tex], [tex]r_{2}[/tex], [tex]r_{3}[/tex] - Distances with respect to the feet, in meters.
[tex]F[/tex] - Upward force exerted by his two arms, in newtons.
If [tex]m_{L} = 6\,kg[/tex], [tex]r_{2} = 1.20\,m[/tex], [tex]m_{A} = 70\,kg[/tex], [tex]r_{3} = 0.90\,m[/tex], [tex]g = 9.807\,\frac{m}{s^{2}}[/tex] and [tex]r_{1} = 1.30\,m[/tex], then the upward force is:
[tex]F = \frac{[(6\,kg)\cdot (1.20\,m)+(70\,kg)\cdot (0.90\,m)]\cdot \left(9.807\,\frac{m}{s^{2}} \right)}{1.30\,m}[/tex]
[tex]F = 529.578\,N[/tex]
The upward force exerted by his two arms is 529.578 newtons. (Right answer: C)
A uniform, solid sphere of radius 2.50 cm and mass 4.75 kg starts with a purely translational speed of 3.00 m/s at the top of an inclined plane. The surface of the incline is 2.75 m long, and is tilted at an angle of 22.0∘ with respect to the horizontal. Assuming the sphere rolls without slipping down the incline, calculate the sphere's final translational speed v2 at the bottom of the ramp.
Answer:
The final translational seed at the bottom of the ramp is approximately 4.84 m/s
Explanation:
The given parameters are;
The radius of the sphere, R = 2.50 cm
The mass of the sphere, m = 4.75 kg
The translational speed at the top of the inclined plane, v = 3.00 m/s
The length of the inclined plane, l = 2.75 m
The angle at which the plane is tilted, θ = 22.0°
We have;
[tex]K_i[/tex] + [tex]U_i[/tex] = [tex]K_f[/tex] + [tex]U_f[/tex]
K = (1/2)×m×v²×(1 + I/(m·r²))
I = (2/5)·m·r²
K = (1/2)×m×v²×(1 + 2/5) = 7/10 × m×v²
U = m·g·h
h = l×sin(θ)
h = 2.75×sin(22.0°)
∴ 7/10×4.75×3.00² + 4.75×9.81×2.75×sin(22.0°) = 7/10 × 4.75×[tex]v_f[/tex]² + 0
7/10×4.75×3.00² + 4.75×9.81×2.75×sin(22.0°) ≈ 77.93
∴ 77.93 ≈ 7/10 × 4.75×[tex]v_f[/tex]²
[tex]v_f[/tex]² = 77.93/(7/10 × 4.75)
[tex]v_f[/tex] ≈ √(77.93/(7/10 × 4.75)) ≈ 4.84
The final translational seed at the bottom of the ramp, [tex]v_f[/tex] ≈ 4.84 m/s.
why do black holes have a large gravitational pull that even light cannot escape from
Answer:
Because matter has been squeezed into a tiny space.
Explanation:
According to NASA, this can happen when a star is dying.
A black hole has no more gravity than the same amount of matter in any other form.
But remember that the gravitational forces are stronger as you get closer to the center of the body. The mass of a black hole is packed into such a small size (theoretically zero !) that you can get very close to its center. THAT'S where its gravity is hugely strong.
A car increase its speed steadily from 30km/hr to 60km/hr in 1 min A what is the average speed during this time
Explanation:
initial velocity(u)=30km/hr = 30*1000/60*60=8.33 m/s
final velocity(v) =60km/hr = 60*1000/60*60 =16.67 m/s
time taken(t) = 1 minutes
= 60 seconds
Now,
Average velocity = u+v/2
= 8.33 m/s + 16.67m/s÷2
=12.5 m/s